How-To & Care

Tri-Colour (CCT) Lights Explained: One Fitting, Three Colours

Tri-colour (CCT) lights let one fitting produce warm, neutral or daylight white. How the switch works, why the coolest setting differs by brand, and what to check before you buy.

Domus Lighting LED Downlights Deco-13 Trio Dimmable Led Downlight
Domus Lighting LED Downlights Deco-13 Trio Dimmable Led Downlight

Tri-colour lighting means one LED fitting that can produce three different colours of white light: a warm white, a neutral white and a cool daylight white. You choose the setting with a small switch on the fitting, so the same downlight, oyster or floodlight can suit a bedroom, a kitchen or a driveway. You will also see it called CCT, colour-switchable, 3CCT or "trio" on product pages, and they all mean the same thing.

Tri-colour is not the same as colour-changing RGB lighting, and it is not the same as dimming. It changes the tone of the white light, not its colour or its brightness. This guide explains how the settings work, how the switch is set on different fittings, and the few details worth checking before you buy.

What CCT actually means

CCT stands for correlated colour temperature, measured in kelvin (K). Lower numbers look warmer and more yellow, like an old incandescent globe. Higher numbers look whiter and bluer, closer to daylight. A standard LED fitting is made at one colour temperature. A tri-colour fitting carries LEDs and a driver that can produce three, and you pick one.

If you want the background on choosing a colour temperature for each room, our guide to light colour and colour temperature covers it in detail. This article is about the switchable fittings themselves.

The three settings, and where each one suits

Most tri-colour fittings use a warm white around 3000K and a neutral white around 4000K. The third, coolest setting varies more between brands than people expect, so check it on the product page.

Setting How it looks Where it usually suits
Warm white (around 3000K) Soft, slightly yellow, relaxing Bedrooms, living rooms, dining areas, outdoor areas close to the house
Neutral or cool white (around 4000K) Clean, crisp white without a blue cast Kitchens, bathrooms, laundries, studies, offices
Daylight (5000K to 6000K) Bright, bluish white Garages, workshops, security and work areas

The coolest setting is where brands differ. In our range, the Domus DECO-13 downlight switches between 3000K, 4000K and 5700K, the SAL Benny oyster between 3000K, 4000K and 6000K, the Oriel LEENA oyster between 3000K, 4000K and 5000K, and the Domus BLAZE-PRO floodlight between 3000K, 4000K and 5500K. If you are adding a fitting to a room that already has tri-colour lights set to daylight, match the actual kelvin figure, not just the word "daylight".

How the colour is selected

This is the detail that catches people out. Every tri-colour fitting has a way of choosing the setting, but where that switch sits decides whether you can change your mind later.

Switch type When you set it What it means for you
Dip switch on the back of the fitting or driver Before installation Decide before the electrician arrives. Changing it later means taking the fitting down.
Switch inside the cover Any time, by removing the cover You can live with the light first and change it afterwards.
Switch on the body (outdoor fittings) At installation, or at the fitting if it is reachable Common on floodlights, sometimes with a separate switch for wattage.
Wall switch or remote Any time Found on some fan light kits and smart fittings. Check the product page to see which yours uses.

Two examples from our range show the difference. The Domus DECO-13 Trio downlight is set on a dip switch at the back, before installation. The Oriel LEENA.38 oyster has its switch inside the cover, and its product page says the colour can be changed after installation.

Brightness can change between settings

A tri-colour fitting does not always produce the same lumens at every setting. The DECO-13, for example, is listed at 800 lumens at 3000K, 850 at 4000K and 900 at 5700K. The difference is small, but it means the warm setting is slightly dimmer than the cool one.

Other fittings hold their output steady. The Domus BLAZE-PRO small floodlight has one switch for wattage (50, 70 or 100 W) and another for colour, and its page states that the colour setting does not change the output. When brightness matters, look for the per-setting lumen figures on the product page rather than a single number.

Why tri-colour fittings are so common

You do not have to guess before you build. Choosing a colour temperature from a catalogue is hard. A tri-colour fitting lets you set it, live with it, and adjust if the room feels wrong, provided the switch is reachable.

One product suits the whole house. Builders and electricians like tri-colour downlights because the same fitting can be warm in the bedrooms and neutral in the kitchen. It simplifies ordering and spares.

Matching existing lights is easier. If you are replacing a few downlights in a room, a tri-colour fitting gives you three chances to match the ones you are keeping.

Outdoors, one floodlight can do two jobs. Warm white suits a garden or a deck near the house, while a cooler setting suits a driveway or work area. Our LED flood light buying guide covers lumens, beam and sensors for those jobs.

Tri-colour fittings in our range

Downlights. The Domus DECO-13 Trio is a 13 W deep-set downlight with a 90 mm cutout and a housing only 38 mm high, which suits ceilings with little room above them. The SAL Ecostar 9W tri-colour downlight switches between 3000K, 4000K and 5700K, is dimmable with a trailing edge dimmer, and takes a 72 mm cutout. Browse all LED downlights and look for "tri-colour", "trio" or "CCT" in the title.

Oyster lights. The Oriel LEENA.38 is a 24 W oyster producing 1,500 lumens, dimmable with a suitable LED-friendly dimmer, with 3000K, 4000K and 5000K settings. For a damp or exposed position, the SAL Benny oyster is rated IP65 and uses an inbuilt dip switch to select 3000K, 4000K or 6000K. See the full range of oyster lights.

Floodlights. The Domus BLAZE-PRO small is rated IP66, switches between 3000K, 4000K and 5500K, and comes with a 1.5 m flex and plug. The rest of the range is in flood lights.

Tips for getting the setting right

  • Set every fitting in a room the same. With dip switches, it is easy for one downlight to end up on a different setting. Check them all before the electrician fits them, and turn them all on together before they leave.
  • Know the switch type before installation day. If it is a dip switch, decide the setting in advance and tell your electrician.
  • Check dimming separately. Tri-colour and dimmable are different features. Some tri-colour fittings dim and some do not, and dimmers should be LED compatible.
  • Match the kelvin, not the label. "Cool white" can mean 4000K on one brand and something else on another. The kelvin number is the reliable comparison.
  • Leave the electrical work to a licensed electrician. Setting a switch is simple, but installing or removing a hard-wired fitting is not a DIY job.

Frequently asked questions

Is tri-colour the same as colour-changing lighting?

No. Tri-colour switches between three shades of white light. Colour-changing (RGB) lighting produces colours such as red, green and blue. A tri-colour fitting will never turn purple.

Can I change the colour after the light is installed?

It depends on where the switch is. Fittings with a switch inside the cover, such as the Oriel LEENA, can be changed afterwards. Fittings with a dip switch on the back, such as the Domus DECO-13, are set before installation and need to come down to be changed.

Which tri-colour setting should I use in a bedroom?

Most people choose the warm setting, around 3000K, for bedrooms and living areas. Neutral white around 4000K usually suits kitchens, bathrooms and studies.

Are tri-colour lights dimmable?

Some are and some are not. Dimming is a separate feature, so check the product page, and use a dimmer that is compatible with LED.

What does CCT mean on a light fitting?

CCT stands for correlated colour temperature, the warmth or coolness of white light in kelvin. On a product title, "CCT" usually means the colour temperature is selectable, in other words a tri-colour fitting.

Do all tri-colour lights use the same three settings?

No. The warm and neutral settings are usually around 3000K and 4000K, but the coolest setting ranges from 5000K to 6000K depending on the brand. Check the figures before you mix fittings in one room.

Need help choosing?

Lights For You is a Sydney lighting store with a showroom in Ashfield, and our team can help you compare tri-colour downlights, oysters and floodlights side by side. You can also browse the LED downlights range online and filter by colour temperature.

Shop our lighting range
Tri-colour, dimmable and designer options in stock — fast Australia-wide delivery.
Shop now →