The best bedroom lighting ideas all start from the same principle: give the room three layers of light that you can switch separately. A ceiling light or fan light for getting dressed and cleaning, a lamp or reading light at each side of the bed, and a soft light somewhere else in the room for winding down. Keep the colour warm, put the bedside layer within reach of the bed, and make the brightest light dimmable.
Below are practical ideas for each layer, the mistakes that make a bedroom feel harsh, and a handful of fittings from our bedroom lighting range that show how the layers fit together.
The three layers at a glance
| Layer | What it is for | Good options |
|---|---|---|
| Ceiling | Even light for dressing, making the bed and cleaning | Slim LED ceiling light, close-to-ceiling fitting, ceiling fan with a light |
| Bedside | Reading and getting in and out of bed | Table lamps, adjustable lamps, wall reading lights |
| Mood | A soft glow for the evening, without the ceiling light on | Floor lamp in a corner, lamp on a dresser, dimmed ceiling light |
Ceiling light ideas
Go slim and diffused. In a bedroom you often look straight up at the ceiling, so a bare globe or a bright point of light is uncomfortable. A flat, diffused LED ceiling light spreads the light across its whole face and is much easier on the eye from the pillow.
Choose dimmable, and check the dimmer. Being able to turn the main light down changes how the room feels at night. Make sure the fitting is marked dimmable and that the wall dimmer is LED compatible, or you can get flicker and buzzing. The Oriel ORBIS 40 is a flush 24 W LED ceiling light giving 1,500 lumens, dimmable on a suitable LED-friendly dimmer, with 3000K, 4000K or 5000K set by your electrician at installation. For a bedroom, ask for 3000K.
Combine the fan and the light. Australian bedrooms usually need a ceiling fan for summer, and one fitting in the middle of the ceiling is tidier than a fan and a separate light competing for the same spot. A fan with an integrated LED light and a remote also means you can turn both off from bed. The Eglo Iluka 52" is a DC flush-mount fan just 252 mm high, with a dimmable 20 W tri-colour LED light (3000K, 4000K or 5000K). The low profile suits standard ceilings where a fan on a downrod would hang too low. Browse more ceiling fans with lights, or read our guide to the best ceiling fans for bedrooms for fan-specific advice on noise and size.
Bedside lighting ideas
One light per side. If two people share the bed, each needs their own light and their own switch. A matching pair of lamps is the classic approach, and it makes a room look finished.
Get the height right. A simple guide is that when you are sitting up in bed, the bottom of the shade should be roughly at eye level. Too low and the light lands on the bedside table rather than your book; too high and you look into the globe. Measure your bedside table and the height of your mattress before you choose.
Use an adjustable lamp for readers. If one of you reads late, an adjustable head lets you put light on the page without lighting up the whole bed. The Telbix Jeremy table lamp has a 410 mm reach and a head that rotates a full 360 degrees, so it can be turned away from a sleeping partner. It takes a replaceable GU10 globe (not supplied), and Telbix suggests a 3000K globe for bedside use.
Choose a shade that glows. For a softer look, an opal or fabric shade spreads light gently around the bedside. The Eglo Hambleton is a 385 mm satin nickel lamp with a white shade, an E27 globe holder and an in-line switch, sized for a standard bedside table. For something more sculptural, the Telbix Rocha suspends a 200 mm mouth-blown glass sphere inside a slim metal frame. The antique gold with opal version gives the warmest, most diffused light, and the black with smoke version is moodier.
See the full range of bedside table lamps, and our table and bedside lamp guide for shade shapes, switching and sizing.
Mood lighting ideas
Light a corner, not the centre. A floor lamp in the corner, or beside a reading chair, gives the room depth and lets you leave the ceiling light off in the evening. The Priddy adjustable floor lamp is a 1,370 mm steel lamp with a replaceable E27 globe and an in-line switch, and the adjustable head lets you aim it at a chair or bounce it off a wall.
Light the dresser or a shelf. A small lamp on a chest of drawers gives a low, warm glow that is ideal when one person is asleep and the other is still getting ready.
Keep the bedroom globes consistent. If the ceiling light is 3000K and one bedside lamp has a cool white globe, the mismatch is obvious at night. Pick one warm colour temperature for every globe in the room.
Colour temperature and brightness for bedrooms
For bedrooms, warm white of about 2700K to 3000K is the usual choice, because it feels relaxed and flatters skin tones and timber. Cooler 4000K and above is better kept for a walk-in robe or a desk area where you need to see colours accurately. Our guide to colour temperature for every room explains the scale.
Bedrooms do not need to be as bright as kitchens. What matters more is control: a dimmable main light and separate lamps let you go from bright enough to find a sock to low enough to read without waking anyone.
Ideas for different bedrooms
Main bedroom. A fan with a light or a dimmable ceiling light, a pair of bedside lamps, and a floor lamp in a reading corner if you have the space.
Small bedroom or guest room. Save floor space with a slim ceiling light and a single bedside lamp with a compact base. An adjustable lamp can double as a desk lamp.
Kids' rooms. Choose a ceiling fitting with a diffuser that hides the globe, keep lamps away from where small hands can pull them over, and consider a dimmable main light so you can leave a low glow on at bedtime.
Teenagers and study corners. Add a task lamp at the desk with a neutral 4000K globe, and keep the rest of the room warm.
Switching that suits the way you use the room
Plan the switches before the electrician arrives. A switch at the door for the ceiling light, plus a way to turn it off from bed, saves a walk in the dark. A fan remote does this for fan lights, and lamps with in-line or touch switches keep control within reach of the pillow.
Lights For You has helped people light their homes from our Sydney showroom in Ashfield for years, so if you would like help matching a ceiling light, fan and lamps for one room, bring the room size and ceiling height and we will talk it through.
Frequently asked questions
What is the best lighting for a bedroom?
A combination works best: a dimmable ceiling light or fan light for general light, a lamp on each side of the bed for reading, and a floor or table lamp for a soft evening glow. Each layer should be switched separately.
What colour temperature is best for a bedroom?
Warm white, around 2700K to 3000K, suits most bedrooms. Use the same colour temperature for every globe in the room so the light looks even.
How high should a bedside lamp be?
As a guide, when you sit up in bed the bottom of the shade should be close to eye level. That puts the light on your book without shining the globe into your eyes.
Can I have a ceiling fan with a light in a bedroom?
Yes, and it is a popular choice in Australian bedrooms. A flush-mount or low-profile fan suits standard ceiling heights, and a remote lets you control the fan and light from bed.
Should bedroom lights be dimmable?
It helps. A dimmable ceiling light lets you lower the light in the evening. Make sure both the light and the wall dimmer are LED compatible to avoid flicker.



