Styling & Inspiration

Hallway Lighting Ideas: How to Light Narrow Halls and Entries

Five practical ideas for lighting narrow hallways and entries: a row of slim ceiling lights, up/down wall lights, a feature entry, motion sensors and two-way switching.

Eglo ROMEO 206345
Eglo ROMEO 206345

Good hallway lighting ideas come down to three things: light the whole length evenly so there are no dark patches, use slim fittings that do not crowd a narrow space, and make the lights easy to switch from either end. In most homes that means a row of flat ceiling lights or a few wall lights, warm white globes, and a switch or sensor at each entry point.

Hallways are often the darkest part of an Australian home, with no windows and low ceilings, and they are the first thing you see when you walk in. Here are ideas that work for long corridors, short halls and entries, with examples from our hallway and entry lighting range.

Quick guide: which fitting for which hallway

Hallway Try Why
Long, narrow corridor Two or three slim ceiling lights spaced along it Even light from end to end, nothing to bump into
Low ceiling Flat LED oyster or close-to-ceiling light Sits almost flush, so it does not make the ceiling feel lower
Hall with artwork or texture Up/down wall lights Washes the wall and makes a narrow space feel wider
Entry or foyer A statement ceiling light, plus wall lights Sets the tone as you walk in
Night-time path to the bathroom A light on a motion sensor Light without searching for a switch

Idea 1: a row of slim ceiling lights

The simplest way to light a long hallway is with two or more identical ceiling lights spaced evenly along it. A single light in the middle tends to leave both ends dim, and the shadows make the space feel longer and narrower than it is.

Choose slim, diffused fittings. Hallway ceilings are often lower than the rest of the house, and a deep dome or a hanging shade can feel like it is in the way. The Eglo Romeo is just 26 mm deep and comes in four sizes from 220 mm to 500 mm, so the smaller sizes suit a narrow hall. It has a tri-colour LED you set on the fitting to warm, natural or cool white, and an IP54 rating, so the same light can be used in the laundry or bathroom off the hall for a matching look.

If you are replacing old fittings, the hole in the ceiling can be a problem. The Havit Auster 225 slim oyster covers an existing cutout, which saves patching and repainting when you swap out old downlights or a bulky oyster. It accepts a cutout of anywhere from 60 mm to 205 mm, it is dimmable, and it has five colour temperature settings from 2700K to 5000K. For more on sizes and depths, see our guide on how to choose an oyster light, or browse all oyster lights.

Idea 2: wall lights to widen a narrow hall

Light on the walls makes a narrow space feel wider, because your eye reads the lit wall as the edge of the room instead of the dark corners. Up/down wall lights are especially good in hallways: they throw a band of light up and down the wall and leave the ceiling clear.

Keep in mind that most up/down wall lights are decorative first. The Domus GLOW-8 is a dimmable 8 W up/down light giving 320 to 400 lumens, with 3000K, 4000K or 5700K switchable, in black or white. Its product page is candid about what that means: it lights the wall, not the room. In a hallway that is exactly what you want for mood, but pair wall lights with ceiling lights, or space them closely, if the hall is your main route through the house at night.

A simpler option is the Eglo Passa, an up/down wall light in black or white that takes two 5 W GU10 globes, included. Because the globes are replaceable, you can choose a warmer or cooler white later. Browse more indoor wall lights.

Mount wall lights a little above eye level so you do not look straight into the light as you walk past, and space them evenly along the hall. In a narrow hall, check the fitting's overhang so it does not catch shoulders or bags.

Idea 3: make the entry a feature

The entry is where a hallway can show some personality. If you have the ceiling height, a pendant or decorative close-to-ceiling light makes a first impression. Check the swing of the front door and any internal doors before you choose a hanging fitting, and keep enough clearance underneath for people to walk comfortably.

Add a wall light beside a hall table or mirror. It gives a soft light for the moment you drop your keys, and it is far kinder than the full ceiling light when you come home late.

Idea 4: sensors for night-time trips

A hallway is where a motion sensor earns its keep. A light that comes on as you step out of the bedroom, and switches itself off after you have passed, is safer than feeling along the wall for a switch, and it never gets left on all night.

You do not always need a special sensor light. The Brilliant Retro-Fit microwave sensor is a compact sensor that installs out of sight behind the ceiling or wall and connects to your existing lights. It can detect motion through plastic, glass and thin non-metal materials, and the time on, sensitivity and light level are adjustable. It is wired into the lighting circuit, so it is a job for your electrician. Our guide to lighting sensors explains the different types.

Idea 5: switch from both ends

A hallway with a door or room at each end should have a switch at each end, so you can turn the light on as you enter and off as you leave. This is called two-way switching, and it is easiest to add when the ceiling is open or the lights are being replaced anyway. Ask your electrician about it at the same time.

Colour, brightness and consistency

Use warm white. Around 3000K suits most hallways, because the hall connects bedrooms and living areas and a cool light here looks clinical next to warm rooms. Cooler light can work in a modern home with white walls and polished floors, but keep it the same throughout the hall.

Match every fitting. If the hall has several lights, use the same model and colour setting for all of them. A row of fittings in slightly different whites is the most common reason a hallway looks patchy.

Consider dimming. A hallway does not need to be as bright as a kitchen. A dimmable light lets you keep a low glow on in the evening without lighting the whole house.

Common hallway lighting mistakes

  • One light in the middle of a long hall, leaving dark ends.
  • Bulky fittings on a low ceiling.
  • Wall lights mounted at eye level, so you look into the globe.
  • A single switch at one end.
  • Mixed colour temperatures along the same hall.

Lights For You is a Sydney lighting specialist with a showroom in Ashfield. If you are planning a hallway, bring the length, the ceiling height and a photo, and we can suggest fittings and spacing that suit it.

Frequently asked questions

What is the best light for a narrow hallway?

Slim, diffused ceiling lights spaced evenly along the hall are the most practical choice. Add up/down wall lights if you want to make the space feel wider.

How many lights do I need in a hallway?

It depends on the length and the fitting, but a single light in the middle rarely covers a long hall. Two or three evenly spaced lights usually give an even result. Your electrician can help with spacing.

What colour temperature is best for a hallway?

Warm white, around 3000K, suits most homes because it blends with the bedrooms and living areas the hallway connects. Use the same colour for every fitting in the hall.

Can I put a sensor on my hallway lights?

Yes. A sensor can be added to many existing lights, and it is ideal for night-time trips down the hall. It needs to be wired in by a licensed electrician.

Are wall lights or ceiling lights better for a hallway?

Ceiling lights give the most even, practical light. Wall lights add atmosphere and make a narrow hall feel wider. Many hallways look best with both.

Shop our lighting range
Tri-colour, dimmable and designer options in stock — fast Australia-wide delivery.
Shop now →