To choose a lamp shade, start with how it attaches, then size it to the lamp. Check the fitting first: most shades sit on a ring that slips over the lampholder, glass shades sit in a holder sized by their fitter, and many pendant shades clip onto a cord set. Then, for a table or floor lamp, aim for a shade whose bottom width is roughly equal to the height of the lamp base, and whose height is about two-thirds of the base. The lower edge should hide the lampholder from eye level.
This guide covers measuring, proportions, shapes, and the part that trips most people up: rings, adapters and fitter sizes. For choosing the lamp itself, see our table and bedside lamp guide.
Step 1: Work out how the shade attaches
Before you look at colours or fabrics, look at the fitting. There are three common ways a shade attaches.
| Fitting type | How it works | Where you see it |
|---|---|---|
| Ring (washer) fitter | A ring in the top of the shade sits over the lampholder and is held by the holder's shade ring | Table lamps, floor lamps, ceiling pendants on a cord set |
| Glass shade fitter | The neck of a glass shade sits in a holder (often called a gallery) and is held by small screws | Schoolhouse, sphere and period glass pendants |
| Cord grip or frame | A wire frame grips the pendant cord and holds the shade in place | Lightweight fabric and woven pendant shades |
Ring fitters, E27 and B22
Ring fitters are sized to the lampholder. The two common household holders in Australia are E27 (screw) and B22 (bayonet), and they take different sized rings. The Oriel 40cm Poly Cotton Drum Shade, for example, has an E27 shade ring of 43 mm. Some DIY shades come with rings to suit both: the DIY Drum Lampshade includes adaptor rings for E27 and B22 lampholders.
Lamp shade adapter rings
If you have a shade with a larger ring than your lampholder, a reducer ring can bridge the gap. Our lamp shade adapter ring has an outer diameter of 43 mm and an inner diameter of 29 mm, so it sits in a 43 mm shade ring and narrows the opening to 29 mm. Measure the ring in your shade and the threaded part of your lampholder before you order, because a ring that is too loose lets the shade tilt.
Glass shade fitter sizes
Glass pendant shades are sized by their fitter, the diameter of the neck that sits in the holder, and it is usually given in inches. The Victorian 9 Schoolhouse Shade has a 4 1/4 inch fitter, and the Cambridge Small Frost Etch Shade has a 3 1/4 inch fitter. The fitter must match the holder on your pendant or ceiling fitting. A shade's fitter size has nothing to do with how wide the shade is, so two shades of very different sizes can share the same fitter.
Step 2: Size it to the lamp
For table and floor lamps, proportion is what makes a lamp look right. These rules of thumb are a good starting point.
- Width. The bottom of the shade should be roughly as wide as the lamp base is tall, measured from the table to where the lampholder starts. It should also be wider than the widest part of the base.
- Height. The shade should be about two-thirds the height of the base. Too tall and the lamp looks top-heavy; too short and it looks like a hat.
- Coverage. When you are seated or standing nearby, you should not see the lampholder or the globe below the shade's lower edge.
- Room to breathe. On a bedside table, the shade should be narrower than the table so nothing overhangs, and leave room for a glass and a book.
Take three measurements before you shop: the height of the base, the widest point of the base, and the distance from the table to the lampholder. Then compare them with the diameter and height on each shade's listing.
Step 3: Choose a shape
| Shape | Looks | Light |
|---|---|---|
| Drum | Straight sides, modern and versatile | Even light up and down, with a soft glow through the sides |
| Slant or empire | Narrower at the top, classic | More light downwards onto a table or book |
| Coolie | Wide, shallow cone | A broad pool of light below |
| Dome or industrial | Rounded metal or opaque shade | Focused light directly below, little through the sides |
| Glass schoolhouse or sphere | Period or vintage character | A soft all-round glow, especially in opal glass |
As a general guide, match the shape to the base: straight-sided drums suit cylindrical or square bases, and slant shades suit curved and classic bases.
Step 4: Choose the material
Fabric and linen spread light softly and evenly, which suits bedrooms and living rooms. A white drum like the Oriel 40cm gives a clean, bright glow, and its listing notes that it suits a large table lamp base, a slim floor lamp or a hanging suspension.
Natural linen and woven shades add texture and warmth. The Oriel KANTO.40 flax linen shade is 400 mm wide and handmade over a wire spiral frame that grips the power cord, so it fits most cord suspensions as a pendant.
Metal and opaque shades push light down and out of the bottom, which is good for task lighting over a bench or dining table.
Opal and frosted glass diffuse the globe into an even glow, and suit traditional and heritage homes.
Whatever the material, check the maximum globe wattage on the shade's listing and stay within it. LED globes run much cooler than old incandescent globes, which makes this easy to meet.
Pendant lamp shades
A shade-only pendant is one of the simplest ways to refresh a room. If your ceiling already has a cord set or lampholder, many fabric, woven and metal shades fit straight onto it. For glass shades, check that the pendant has a holder made for the shade's fitter size. Browse our pendant shades for glass, metal and woven options.
For a ceiling pendant, size the shade to the space below it rather than to a lamp base: a small shade can look lost over a long dining table, while a wide one can crowd a small hallway. Hang it high enough to clear heads and low enough to hide the globe from a seated position.
Common mistakes
- Buying by look, not by fitting. The wrong ring or fitter means the shade will not sit on your lamp.
- Too small a shade. A small shade on a tall base looks unbalanced and lets glare out the bottom.
- Ignoring the globe. A bare clear globe peeking out under a shade causes glare. A frosted LED globe helps.
- Forgetting the wattage limit. Check the shade's maximum globe wattage before you fit a globe.
Browse the full range of lamp shades, and for ideas on placing floor lamps around a room, read our floor lamp styling guide.
Frequently asked questions
How do I know what size lamp shade I need?
Measure the lamp base. Aim for a shade whose bottom width is about the height of the base, and whose height is about two-thirds of the base. The lower edge should hide the lampholder.
What is a lamp shade ring?
It is the ring in the top of a shade that sits over the lampholder and is held in place by the holder's shade ring. It has to match the lampholder size, such as E27 or B22.
What does a lamp shade adapter ring do?
It reduces a larger shade ring to fit a smaller lampholder. Our adapter ring has a 43 mm outer and 29 mm inner diameter.
What does fitter size mean on a glass shade?
It is the diameter of the shade's neck, usually in inches, such as 3 1/4 or 4 1/4 inches. It must match the holder on your fitting.
Can I put any shade on a pendant cord set?
Not any shade, but many fabric, woven and metal shades are made to fit onto a standard cord set. Check the shade's fitting type and the lampholder size first.
See shades in person
Shades are easiest to judge in person, and you are welcome to bring your lamp base into the Lights For You showroom in Ashfield, Sydney, so we can help you find a shade that fits it.



