If you cannot fit a ceiling fan, or you need strong airflow aimed at one spot, a wall fan is usually the answer. It mounts high on the wall, clear of the floor and of little hands, oscillates to sweep the room and most plug straight into a power point. For a bedroom or study, a 40 to 45 cm wall fan with a remote is plenty. For a covered patio, choose one with an IP rating. For a garage, gym or workshop, step up to a 50 to 75 cm industrial fan. Here is how to choose, with picks from our range.
When you are ready to compare, you can shop wall fans or browse pedestal fans.
Wall fan, pedestal fan or ceiling fan?
When a wall fan makes sense
A wall fan is the practical choice when a ceiling fan is not: a ceiling too low for blades to clear head height, a rental, a ceiling with no safe fixing point, or a garage, shed or carport. It takes no floor space, cannot be knocked over, and oscillation plus a tilting head let you aim the breeze across a bed, desk or workbench.
When a pedestal fan is the better fit
A pedestal fan can follow you from room to room, and there is nothing to drill, which suits renters and occasional use. The trade-off is floor space and a cord along the ground.
When a ceiling fan is still best
If your ceiling is high enough, a ceiling fan gives the most even, quiet air across a whole room. Our guide to what size ceiling fan you need covers room sizes and ceiling heights, and our outdoor ceiling fans guide covers alfresco and patio areas.
What to look for in a wall fan
Size and airflow
Wall fans are sized by the sweep of their blades. Residential models are typically around 40 to 45 cm, which suits a bedroom, study or kitchen. Industrial models of 50 to 75 cm move far more air and suit garages, home gyms, workshops and large open areas.
Where a manufacturer publishes airflow, it is shown in cubic metres per hour (m³/h), the most useful number for comparing fans. The figures below run from 7,200 m³/h for a 50 cm industrial wall fan to over 18,000 m³/h for a 75 cm DC model. Not every fan lists airflow, so compare like with like.
DC or AC motor
An AC motor is the traditional option: simple, robust and usually less expensive. A DC motor is brushless and electronically controlled, which gives more speed steps and lower power use. Ventair states that its WALL DC models use up to 70% less power than traditional AC equivalents. If the fan will run for long hours through summer, or in a bedroom where you want a gentle low speed, DC is worth considering. Our guide to AC, DC and EC fan motors explains the difference in more detail.
Controls: remote, pull cord or dial
A wall fan sits above head height, so a remote is the most convenient choice, especially in a bedroom, and a timer lets it switch off after you fall asleep. Pull cords and on-unit dials are simpler and suit garages and workshops.
Where it will live
Most wall fans are designed for indoor use. For a covered patio, verandah or alfresco, choose a fan that states it is suitable for covered outdoor areas and carries an IP rating, which shows how well it is protected against dust and water. Our guide to IP ratings explains what the numbers mean.
Wall fans worth a look from our range
The fans below are listed with the specifications their manufacturers publish. Where a figure is not listed, we have left it out rather than guess.
For bedrooms, studies and kitchens
Ventair Zephyr II Oscillating Wall Fan with remote. A 40 cm white wall fan with ABS blades, a 65 W motor and three speeds (950, 1150 and 1300 RPM). It oscillates, the head tilts, a remote control is included and it plugs into a power point with the supplied plug and lead, so no hard wiring is needed. A sensible, affordable choice for a bedroom or home office.
Ventair WALL DC 45cm Oscillating Wall Fan. A step up for rooms where the fan runs for hours. It has a brushless DC motor rated at 90 W, six matte black aluminium blades on a 450 mm sweep, six speeds from 500 to 1400 RPM and a remote with a timer. The head tilts and oscillates, it installs with a plug and lead, and several WALL DC fans can be paired to one remote. Ventair covers it with a 2-year warranty.
For covered patios and alfresco areas
Ventair TILT360 Wall Mount Fan. A 42 cm drum-style wall fan rated IP54 and listed as suitable for indoor and covered outdoor use. It has a full copper AC motor, four aluminium blades and three speeds set by a dial on the unit, with published air delivery of up to 7,645 m³/h on high and a noise level of 70 dB(A). An extended pivot arm lets you aim it where you need it, it comes with an AC plug and lead, and it carries a 3-year warranty.
For garages, home gyms and workshops
Ventair WALL DC 75cm Oscillating Wall Fan. The most powerful wall fan in this list. It pairs a 750 mm sweep with a 130 W brushless DC motor and published air delivery of 18,876 m³/h, at a listed 72 dB(A). Like its 45 cm sibling, it has a six-speed remote with timer, oscillation, a tilting head, plug-and-lead installation and a 2-year warranty.
Mercator Broome Industrial AC Wall Fan. A 75 cm industrial fan with an 81.5 cm grille, a 220 W AC motor with 100% copper wire and three aluminium blades. Mercator lists up to 16,000 m³/h of air movement, three speeds and 80 degrees of horizontal oscillation. It sits 48 cm out from the wall, so allow for that clearance.
Mercator Arena 500mm Industrial Wall Fan. A more compact industrial option. It lists 7,200 m³/h of airflow, a long-life motor with 100% copper wire, wide horizontal oscillation, a tilting head, a three-speed pull cord and a 2.3 m power cord with plug, on a heavy-duty wall mount.
If you need to move the fan around: pedestal fans
Mercator Airbond 750mm Industrial DC Pedestal Fan. A large DC pedestal fan with 15,600 m³/h of published airflow, aluminium blades, a heavy-duty base and a height-adjustable pole with a tilting head. Its remote gives 19 variable speeds, oscillation, normal, natural and sleep modes and a 1 to 9 hour timer.
Mercator Broome 750mm Industrial Pedestal Fan. The AC alternative, with 16,000 m³/h of published airflow, three speeds, wide horizontal oscillation, a height-adjustable metal pole, a tilting head and a 2.3 m power cord with plug.
Mounting and safety tips
- Mount it high and solid. Fix the bracket into studs, masonry or a suitable anchor, and follow the minimum mounting height in the fan's manual.
- Plan the power. A plug-in fan needs a power point within reach of its lead. Adding a power point or hard-wiring a fan must be done by a licensed electrician.
- Allow for the swing. Oscillating fans need clear space around the head, and large industrial fans stand well out from the wall.
- Keep it clean. Dust on the blades and grille reduces airflow. Unplug the fan before cleaning it.
Frequently asked questions
Are wall fans better than pedestal fans?
Neither is better everywhere. A wall fan saves floor space and cannot be knocked over, which suits bedrooms, kitchens and busy family areas. A pedestal fan moves wherever you need it and needs no drilling.
Can I use a wall fan outside?
Only if it is designed for it. Look for a fan listed as suitable for covered outdoor use with an IP rating, such as the Ventair TILT360, which is rated IP54. Indoor wall fans should stay indoors.
Do wall fans need an electrician to install?
A plug-in wall fan can be mounted on the wall and plugged into an existing power point, following the manufacturer's instructions. Adding a new power point or hard-wiring a fan is electrical work and must be done by a licensed electrician.
What size wall fan do I need?
For a bedroom, study or kitchen, a 40 to 45 cm wall fan is usually enough. For a garage, home gym, workshop or large open area, choose a 50 to 75 cm industrial fan and compare the published airflow in m³/h.
Ready to cool down?
Browse our full range of wall fans and pedestal fans, or, if your ceiling allows it, explore our ceiling fans. Lights For You delivers Australia-wide, and our Ashfield showroom in Sydney is open if you would like advice before you buy.



