Tilda 2 LED Downlight — lifestyle
Tilda 2 LED Downlight — White
Tilda 2 LED Downlight
Tilda 2 LED Downlight
Tilda 2 LED Downlight
Tilda 2 LED Downlight — lifestyle
Tilda 2 LED Downlight — White
Tilda 2 LED Downlight
Tilda 2 LED Downlight
Tilda 2 LED Downlight
Loading... + Add to wishlist - Remove from wishlist
Telbix Lighting
SKU: TILDA DL2-WH

Tilda 2 LED Downlight

3 Years Warranty
3 Years Warranty
IP20 – perfect for indoor use
IP20 – perfect for indoor use
Color Temprature Changing Technology
Color Temprature Changing Technology
Very bright – large areas
1500 lm Learn More!!
Dimmable
Dimmable
Colour: White
$32.95
$55.00
$32.95
Product Description  
Product Description
x

The Tilda DL2 is a two-light adjustable LED downlight bar in white — 10 W total giving 750 lm, with switchable 2700 K / 3000 K / 4000 K, CRI above 90 and TRIAC dimming — each head pulls out and rotates 360°.

Our page said 1,500 lumens. It gives 750. At 10 W, 1,500 lm would be 150 lm/W — impossible for a CRI-above-90 fitting. The four-light Tilda gives exactly 1,500 lm from 20 W, and this two-light gives 750 lm from 10 W — the identical 75 lm/W. The 1,500 had been copied across from the four-light listing. If you were comparing fittings on output, compare again at 750.

⚠ No cutout dimension exists anywhere. The product is recorded as a recessed downlight and no source we hold gives a cutout — which is the one measurement an installer cannot proceed without. Ask us before your electrician cuts anything. The fitting body is 139 mm long by 90 mm wide by 70 mm deep; the hole it needs is not recorded.

Each head pulls out and turns through 360°

This is what separates the Tilda from an ordinary downlight. Each of the two heads extends down out of the housing and rotates a full circle, so a single recessed fitting can aim light at two different things — a picture and a bench, a splashback and a sink — and be re-aimed later without touching the ceiling. A fixed downlight commits you at the moment the hole is cut; this one does not.

2700 K at the warm end, and CRI above 90

2700 K, 3000 K or 4000 K, switchable — a warmer range than the usual 3000/4000/5000, with no cool setting at all. That is a deliberate choice for a domestic fitting. Combined with CRI above 90 it means timber, food, artwork and skin hold their real colour, which is exactly what an aimable fitting is for: you are pointing it at something you want looked at.

Class II — double insulated, no earth required, and IC-4, so it may be covered by ceiling insulation. It dims from an ordinary TRIAC leading-edge wall dimmer. Body is polycarbonate, 0.33 kg, with a 690 mm tail.

The smallest of three

Tilda comes as a two, four and six-light bar — 139 mm, 237 mm and longer — all the same 90 mm width and 70 mm depth, all aimable, all at the same 75 lm/W. Choose by how many things you want to light, not by the size of the room.

Where it works
  • Over benches, splashbacks and artwork — two aimable heads from one hole.
  • Anywhere the lighting might be re-aimed later.
  • Insulated ceilings — IC-4.
  • ⚠ Confirm the cutout with us before anything is cut.
  • ⚠ 750 lumens, not 1,500 — the old figure was wrong.
Specifying it

139 mm long, 90 mm wide, 70 mm deep, 0.33 kg, tail 690 mm, in matte polycarbonate. Cutout is NOT recorded — ask us. Two integrated LEDs, 10 W total, giving 750 lm, included, with switchable 2700 K / 3000 K / 4000 K, CRI >90, TRIAC dimmable, IC-4, pull-out heads with 360° rotation. 240 V, Class II — double insulated, no earth required, IP20 — indoor and dry locations only. Warranty is three years, as a replacement warranty.

Supplied and supported by Lights For You.

Questions
Your old page said 1,500 lumens — which is right?

750. At 10 W, 1,500 lm would be 150 lm/W, which is impossible for a CRI-above-90 fitting. The four-light Tilda gives exactly 1,500 lm from 20 W, and this two-light gives 750 from 10 — the identical 75 lm/W. The figure had been copied across from the four-light listing.

What cutout does it need?

We do not know, and it is the one measurement an installer cannot proceed without. No source we hold gives a cutout for it. Ask us before your electrician cuts anything.

What do the adjustable heads do?

Each head extends down out of the housing and rotates a full circle, so one recessed fitting can aim light at two different things — and be re-aimed later without touching the ceiling. A fixed downlight commits you when the hole is cut; this one does not.

Is there a cool white setting?

No — 2700 K, 3000 K or 4000 K, a warmer range than the usual 3000/4000/5000 with no cool setting at all. That is a deliberate choice for a domestic fitting.

What does CRI above 90 buy me?

True colour on whatever you aim it at — timber, food, artwork and skin. On an aimable fitting that matters more than usual, because you are pointing it at something you want looked at.

Can it be covered with insulation?

Yes — IC-4 rated. It is also Class II, double insulated, so no earth is required.

Two, four or six lights?

Choose by how many things you want to light, not the size of the room. All three are the same 90 mm width and 70 mm depth, all aimable, all at the same 75 lm/W.

Product Specifications  
Product Specifications
x

Specifications

BrandTelbix Lighting
Model / SKUTILDA DL2-WH (White)
TypeRecessed downlight bar — TWO pull-out heads, 360° rotation
FinishWhite — matte
Input Voltage240V
Lamp Holders2
Wattage10W total — integrated LEDs, included
Lumen Output750lm — the old page said 1500lm, which was wrong
Efficacy75 lm/W — matching the four-light Tilda exactly
Colour TemperatureSWITCHABLE 2700K / 3000K / 4000K — no cool setting
CRI> 90
AdjustmentEach head PULLS OUT and rotates 360°
DimmingYES — TRIAC (ordinary leading-edge wall dimmer)
Insulation RatingIC-4 — may be covered with insulation
IP RatingIP20 — indoor and dry locations only
Electrical ProtectionCLASS II — double insulated, no earth required
CutoutNOT RECORDED — ask us before anything is cut
Length139mm
Width90mm
Depth70mm
Cable Tail690mm
Weight0.33kg
MaterialPolycarbonate
Warranty3 Years — replacement warranty

Variant specifications

Order codeHeadsLengthWattageOutput
TILDA DL2-WH2139mm10W750lm
Data Sheet & Manual  
Data Sheet & Manual
x

This browser does not support PDFs. Please download the PDF to view it: Download PDF.

Download Datasheet (PDF)

Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
$32.95
$55.00
$32.95
Vendor
Example product title
$32.95
$55.00
$32.95
Vendor
Example product title
$32.95
$55.00
$32.95
Vendor
Example product title
$32.95
$55.00
$32.95
Vendor
Example product title
$32.95
$55.00
$32.95
Vendor
Example product title
$32.95
$55.00
$32.95
Vendor
Example product title
$32.95
$55.00
$32.95
Vendor
Example product title
$32.95
$55.00
$32.95
Vendor
Example product title
$32.95
$55.00
$32.95
Vendor
Example product title
$32.95
$55.00
$32.95