CHAM-REM-3C - RGBW LED RF And Bluetooth Remote Control

The Domus CHAM-REM-3C is a handheld RF and Bluetooth remote for RGBW LED strip — dimming, colour, colour-change speed and scene memory — with a magnetic back and a mounting bracket. 160 × 40 × 20 mm.

What it controls

• Dimming across the whole range.
• Colour across RGBW.
• ⭐ Colour-change speed — it runs a changing-colour mode and lets you speed it up or slow it down. ✅ That is the control most colour installations actually need: the choice is rarely "which colour" and usually "how fast, and how subtle".
• Scene memory — a set colour and level saved to a single press.
• ✅ Its colour-changing flag is correctly recorded, unlike the single-colour remote and wall plate in the same family, which carry the same flag and cannot use it.

RGBW rather than RGB

• RGB makes white by mixing red, green and blue, which gives a colour cast.
• RGBW adds a dedicated white LED channel, so white is actually white.
• ✅ Most colour installations spend most of their time on white. If yours will, the strip should be RGBW — and this remote handles it.
• ⚠ Match the remote to the strip. There is no benefit in an RGBW remote on a single-colour strip, and the CHAM-REM-1C is the simpler answer there.

⭐ The magnet is a better detail than it sounds

• A magnet on the back holds the remote to the supplied bracket.
• ✅ A remote that has a place on the wall gets used; one that lives in a drawer does not — and a colour installation only controllable by a lost handset ends up stuck on whatever it was left on, which on a colour strip is far more conspicuous than on a plain one.
• ✅ Mount the bracket where a light switch would be, so people find it where they expect a control.
• ✅ It still lifts off to be used from the sofa, which a fixed wall plate cannot do.
• ⚠ If you want a permanent wall control as well, the CHAM-TOUCH-3C is the mains-wired glass plate. The two coexist.

The three remotes in this family

✅ Tell us the strip you are running and we will specify the matching remote and the receiver.

What is not recorded

• ⚠ Battery type. Its tunable-white sibling takes two AAA cells; we are not assuming the same. Ask us.
• ⚠ RF range. No figure in any source. In practice RF handsets of this kind work across a normal room and through a plasterboard wall — but if the receiver will be a long way from where you sit, tell us.
• ⚠ Scene count and whether scenes survive a power cut.
• ⚠ Its datasheet did not yield readable figures, so everything here comes from the record and Domus's description.

Where it works

• ✅ RGB and RGBW strip installations using the CHAM-BT-RF-5C receiver.
• ✅ Media rooms, bars, coves and feature lighting — anywhere the colour changes.
• ✅ Alongside the CHAM-TOUCH-3C wall plate and the phone app.
• ⛔ Not for a single-colour strip — use the CHAM-REM-1C.
• ⛔ Not usable without the receiver.
• ⚠ Ask us about the battery and the RF range before ordering.

Specifying it

Handheld RF + Bluetooth RGBW remote control — dimming, colour, colour-change speed and scene memory. 160 × 40 × 20 mm, with a magnetic back and a mounting bracket.

⛔ Requires the CHAM-BT-RF-5C receiver — sold separately, listed as the "Bluetooth RF 5-1 Universal Controller". The remote does nothing without it. ⚠ Battery type, RF range and scene count are not recorded in any source — ask us and we will confirm. ⚠ Figures here are from the product record and Domus's description; the datasheet did not yield readable values. Warranty 3 years.

Supplied and supported by Lights For You.

Download Datasheet (PDF)

Download Datasheet (PDF)