ROSNER FLOOR LAMP

The Rosner is a 1,500 mm floor lamp in sand-finished iron with an adjustable head and gold detailing — in black or white, taking one GU10 lamp.

The head adjusts, and the gold is where you see it

Two details working together. The head tilts, so one lamp reads a book, washes a wall or lifts a corner. And the gold detailing sits on the head itself — the part at eye level when you are seated, and the part that catches its own light. On a plain sand-finished body, that single warm accent is what stops it reading as a utility lamp.

GU10, which suits a lamp you aim

A GU10 is a reflector lamp with its own beam — so you choose the beam angle: narrow for reading, wide for a wall wash. That choice is yours and you can change it later. Up to 6 W, not supplied.

A 250 mm base under a 150 mm shade

The proportions are deliberate: a ø250 mm base under a small ø150 mm head, at 3.05 kg. Wide and heavy at the bottom, light at the top — which a 1.5-metre lamp with a head you push and pull genuinely needs.

Sand finish, in black or white

A fine texture rather than a gloss, so it does not show fingerprints or reflect lamplight. Black is graphic against a pale wall; white nearly disappears.

There is a matching table lamp

Rosner runs as floor and table lamps, both with the adjustable head and the gold detail. A floor lamp beside a chair with the table lamp on the side table reads as one considered pairing.

Where it works

• Beside a reading chair — head aimed down.
• Living room corners, aimed at the wall.
• Studies and home offices.
• Rooms where the seating moves.

Specifying it

1,500 mm tall, 240 mm wide, base ø250 mm, head ø150 × 150 mm, cable 2,000 mm with a plug, 3.05 kg, in iron, sand finish. One GU10 lamp to 6 W, not supplied, in an adjustable head; dimming is globe dependent. 240 V, Class II — double insulated, no earth required, IP20 — indoor and dry locations only. Warranty is three years, as a replacement warranty.

Supplied and supported by Lights For You.

Download Datasheet (PDF)