Bar Lights
Batten Lights
Batten Fix Lights(DIY)
Bedside Table Lamps
Cabinet Lights
Ceiling Lights
Chandeliers
Close to Ceiling Light (CTC)
Copper Lights
Emergency Lighting
Fairy Lights
Floor Lamps
High Bay Lights (UFO)
Lamps
Mirror Lights
Oyster Lights
Pendants Lighting
Plaster Wall Lights
Smart Lights
Spot Lights
Table Lamps
Touch Table Lamps
Up/Down Wall Lights
Vanity Lights
Wall Lights
LED Strips
LED Strips Controller
Batten Lights
Bollard Lighting
Brick Lights
Bunker Lights
Coach Lighting
Deck Lights
Driveway Lights
Fairy Lights
Flood Lights
Garden Lighting
Inground Lights
Pathway Lighting
Pillar Mount
Pond Lights
Posts Lights/Top
Outdoor Ceiling Lights
Outdoor Sensor Lights
Outdoor Wall Lights
Solar Lights
Spike Lights
Step Lights
Up/Down Wall Lights
Clearance Sale
LoginCouldn't load pickup availability
The Pira DL85 is an 85 mm pinhole recessed downlight in white — 10 W giving 500 lm at 3000 K, CRI above 90, TRIAC dimmable, with a 24° beam and a 75 mm cutout.
The warranty is FIVE years, not three. Our page said three; the Telbix datasheet says five, and that is what applies — including if you bought one on the old page.
A pinhole downlight puts the LED deep inside the fitting behind a very small opening. From the room you see almost no fitting at all — a dark aperture in the ceiling that lights something below it — and crucially you cannot see the source from any normal angle. In a bedroom, a gallery wall or anywhere people look up, that is the difference between a comfortable ceiling and a row of bright spots.
It costs you output, and you should know that. 500 lm from 10 W is 50 lm/W — roughly half what an ordinary downlight gives from the same power. The small aperture and deep reflector absorb the difference. That is the trade: you are buying invisibility and comfort, not efficiency, and you will need more fittings for the same light than a conventional downlight would need.
Most general downlights spread 60 degrees or more. The Pira is 24° — narrower even than the 36° Sova and Brex fittings in this range. That produces a tight, defined pool, which is exactly right over artwork, a basin, a bench edge or a feature, and wrong as a room’s general lighting unless you space them very closely indeed. Say the beam angle to your electrician before they set out.
⚠ One claim we are not repeating. The old description mentioned “power-adjustable functionality” — a selectable wattage. Nothing else says so: not the specification table, not our record, not the datasheet, all of which give a flat 10 W. It may be a real but undocumented feature, or copy that belongs to another product. Ask us and we will confirm with Telbix if you need it.
Above 90 where most downlights sit at 80 — and on a pinhole that pairing makes sense: the entire point is that you look at what it lights rather than at it, so the colour accuracy of the light matters more than usual. Timber, artwork, food and fabric hold their real colour.
An 85 mm face over a 75 mm hole — a 5 mm overlap all round. Depth above the ceiling is only 60 mm, which is shallow and lets it into tight voids where deeper fittings will not go. It is IC-4, so it may be covered by ceiling insulation, with surge protection built in at 240 mA.
Our record said simply IP44. The datasheet is more precise: IP44 (room side) — the visible face is splash-protected, so it suits a bathroom ceiling outside the shower zone, while the back of the fitting in the ceiling void is not weather-rated. The normal arrangement for a recessed bathroom downlight, and the wording matters to your electrician.
⚠ It is Class III — low voltage — so it runs on a driver. Normally supplied with a downlight, but no source we hold confirms it. Ask us before you order a run.
85 mm face, 75 mm cutout, 60 mm depth, 0.4 kg, tail 600 mm, in matte aluminium. Integrated 10 W COB LED giving 500 lm at 3000 K, included, CRI >90, 24° beam, 240 mA, TRIAC dimmable, surge protection, IC-4. 240 V, Class III — low voltage; driver required, not confirmed as supplied, IP44 from the room side. Warranty is five years, as a replacement warranty.
Supplied and supported by Lights For You.
Five. Our page said three; the Telbix datasheet says five, and that is what applies — including if you bought one on the old page.
One that puts the LED deep inside the fitting behind a very small opening. From the room you see almost no fitting at all — a dark aperture that lights something below it — and you cannot see the source from any normal angle.
Because the small aperture and deep reflector absorb the difference — 50 lm/W, roughly half an ordinary downlight. That is the trade: you are buying invisibility and comfort, not efficiency, and you will need more fittings for the same light.
24 degrees — narrower even than the 36° Sova and Brex fittings here, and far narrower than a general 60° downlight. It gives a tight, defined pool: right over artwork, a basin or a bench edge, wrong as a room’s general lighting unless spaced very closely. Say the beam angle to your electrician before they set out.
We cannot confirm it. The old description mentioned “power-adjustable functionality”, and nothing else says so — not the specification table, not our record, not the datasheet, all of which give a flat 10 W. Ask us and we will confirm with Telbix.
On a bathroom ceiling outside the shower zone, yes. The datasheet says IP44 room side — the visible face is splash-protected while the back of the fitting in the void is not weather-rated.
Only 60 mm, which is shallow and lets it into tight voids where deeper fittings will not go. It is also IC-4, so it may be covered by ceiling insulation.
| Brand | Telbix Lighting |
|---|---|
| Model / SKU | PIRA DL85-WH93 (White) |
| Type | PINHOLE recessed downlight — the source is invisible |
| Finish | White — matte |
| Input Voltage | 240V |
| Wattage | 10W integrated COB LED — included |
| Lumen Output | 500lm |
| Efficacy | 50 lm/W — HALF a normal downlight; the trade for invisibility |
| Colour Temperature | 3000K warm white — fixed |
| CRI | > 90 |
| Beam Angle | 24° — a SPOT, not general lighting |
| Dimming | YES — TRIAC (ordinary leading-edge wall dimmer) |
| Selectable Wattage | CLAIMED ONCE, unconfirmed by any specification source — ask us |
| Surge Protection | Yes |
| Current | 240mA |
| Insulation Rating | IC-4 — may be covered with insulation |
| IP Rating | IP44 FROM THE ROOM SIDE — bathroom ceiling outside the shower zone |
| Electrical Protection | CLASS III — LOW VOLTAGE. Driver required; ask us |
| Face Diameter | 85mm |
| Cutout | 75mm |
| Depth | 60mm — fits shallow voids |
| Cable Tail | 600mm |
| Weight | 0.4kg |
| Material | Aluminium |
| Warranty | 5 YEARS — replacement warranty (the page said 3; 5 is correct) |
| Order code | Colour | Cutout | Beam | Output |
|---|---|---|---|---|
| PIRA DL85-WH93 | White | 75mm | 24° | 500lm |
For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.
Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.
Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.
If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.
You must lodge a return request via the below request form.
Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.
We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.
Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.
Please refer to the following link to learn more about our policies
Learn MoreThanks for subscribing!
This email has been registered!
| Product | SKU | Product type | Other details |
|---|