Pinta LED Step Light with Eyelid CCT Solid Brass Havit Lighting - HV2903T-BR, HV2904T-BR

The Pinta with an eyelid is a small round surface-mounted exterior light that most people use at step, path and retaining-wall height. This listing is the solid brass version, and the brass is the fitting — not a coating over aluminium. Havit gives the material as Solid Brass with the colour as Brass, and the face carries a fixed eyelid hood that throws the light down and forward rather than out at eye level.

Two part numbers, and the difference is the supply, not the finish. HV2903T-BR runs on 240 V AC and is wired to mains with an earth — Havit lists it as protection class 1 (Requires Earth). HV2904T-BR runs on 12 V DC, is protection class 3 (No Earth Required), and needs an appropriate 12 V DC constant-voltage LED driver: Havit's instructions say, in capitals, DO NOT CONNECT LIGHT FITTING DIRECTLY TO 240V. The two are otherwise the same fitting at the same price, so choose on the circuit you already have. There is no driver in the 240 V circuit at all.

Light output is identical on both. The LED is built in — there is no globe to buy and no lampholder — and it is tri-colour selectable: 3000 K at 160 lm, 4000 K at 170 lm, 5500 K at 180 lm, drawing a maximum of 2.3 W. Beam angle is 120°, colour rendering is CRI>80, and the diffuser is glass. The fitting leaves the factory preset to 3000 K; to change it, the electrician moves the switch above the PCB during installation. Havit rates the LED at >30,000 hours. It is not dimmable on either supply.

Installation, and the two conditions that affect the warranty. It is Wall — Surface Mounted: a base plate goes on the wall first, and every hole in it — cable entry and screw holes alike — must be sealed. The tail is 300 mm long. There is no terminal block on these two models: the cable run and the fitting are stripped, twisted, soldered, and covered with adhesive-lined heat shrink or a gel cap. Havit is explicit that failure to do this will void warranty. Where more than one fitting is on a run, the wiring must be in parallel. On the 12 V version only, Havit adds a low-voltage limit: the voltage at the fitting must be within ±5% of the required voltage and it cannot sit more than 25 m from the LED driver, or the warranty is void. That limit does not apply to the 240 V part number, which has no driver.

Brass tarnishes, and that is normal. Havit's own data sheet states that solid brass and solid copper fittings will naturally tarnish, and that coated brass finishes (the antique brass and graphite models in the same range) may tarnish through the coating outdoors. This one is uncoated solid brass, so expect it to move from bright to a darker patina. Sealed to IP65 and rated IK10 for impact, it carries Havit's 3 Years Replacement warranty on items ordered after 01-01-2022, provided the o-rings and seals are correctly in place. Havit also lists small, medium and large IP67 weatherproof connectors (HV9911, HV9912, HV9913) as compatible accessories, and we stock all three. Lights For You keeps both Pinta brass part numbers on the shelf so an electrician can be sent the right supply the first time.

Download Datasheet (PDF)

Download Datasheet (PDF)