KEON LED DOWNLIGHT 10w/20w White or Black

The Keon is a surface-mounted cylinder downlight — not a recessed one — in two sizes and two colour temperatures, black or white.

It sits below the ceiling, not in it

At 120 mm deep, the Keon projects down from the surface rather than disappearing into the void. That is the point of it: no ceiling cavity is needed, so it works on a concrete slab, a rendered soffit, or any ceiling you cannot cut into. It also reads as a deliberate object rather than a hole.

Two sizes, and they are genuinely different lights

The 10 W at ø90 mm gives 650–700 lm — an accent or a corridor light. The 20 W at ø110 mm gives 1,250–1,300 lm, which is roughly double and enough to be a room's main light in a small space. Pick by the job, not by the look.

A 40° beam is tight

Both sizes throw a 40° beam — a defined pool, not a wash. Use them to mark something: a bench run, a stair, a piece of art, a bar. Spaced like general downlights they will leave scallops and gaps.

Colour is fixed by order code, and so is brightness

-83 is 3000 K, -85 is 5000 K. The 5000 K versions are slightly brighter, as cool LEDs usually are. Not switchable, and not dimmable — decide before ordering.

Where it works

• Concrete and slab ceilings with no cavity to recess into.
• Over bench runs, bars and servery counters.
• Accenting art, joinery or a feature wall.
• Retail and hospitality fit-outs, in runs.

Specifying it

ø90 × 120 mm (10 W) or ø110 × 120 mm (20 W), surface mounted. COB LED, CRI >82, beam 40°, not dimmable. 240 V, IP20 — indoor and dry locations only. Warranty is three years.

Supplied and supported by Lights For You. ⚠ Our supplier sheet describes this fitting as dimmable while our record and the variant table do not. We publish it as not dimmable — ask us before specifying a dimmer and we will confirm with the supplier.

Download Datasheet (PDF)