Jeremy Floor Lamp in Black, Grey

The Jeremy floor lamp is a 1,220 mm sand-finish fitting with a head that rotates a full 360°, in black or grey.

360° is more than it sounds

Most adjustable lamps tilt on a hinge or swivel through part of a circle. The Jeremy's head turns all the way round, so from one position you can light a chair, then a wall, then the ceiling, without moving the lamp or reaching over anything. On a lamp that will sit in a fixed corner, that is the whole feature.

Deliberately short for a floor lamp

At 1,220 mm the Jeremy is well below the 1.5–1.8 m typical of the category. That puts the head at seated eye level rather than standing — better for aiming light at a book or a work surface, and less likely to glare across a room.

Sand finish, not gloss

A fine matt texture rather than a smooth coat. It does not throw hard reflections, and on a lamp you handle to adjust it, fingerprints do not show the way they do on gloss.

GU10, so the beam is yours

A replaceable GU10 globe at 9 W maximum, not supplied. Narrow globes give a defined reading pool; wide ones a softer spread. A failed globe costs a few dollars rather than a lamp.

4.8 kg on a ø220 mm base

Heavy for its height, which is what keeps it stable when the head is rotated off-centre.

Where it works

• Beside a reading chair, head aimed down.
• Corners, rotated onto a wall for indirect light.
• Home offices, aimed off a screen.
• Alongside the matching Jeremy table lamp.

Specifying it

1,220 mm tall, 220 mm reach, base ø220 mm, shade ø100 mm, weight 4.8 kg, cable 2,000 mm with an inline switch, in iron with a sand finish. One GU10 globe at 9 W maximum, not supplied; dimming is globe dependent. 240 V, Class II — double insulated, no earth required, IP20 — indoor and dry locations only. Warranty is three years, as a replacement warranty.

Supplied and supported by Lights For You. The matching Jeremy table lamp has the same rotating head.

Download Datasheet (PDF)