Barline Outdoor Up/Down Wall Light 1000mm

Barline 1000mm up/down wall light — 240V

This is the up-and-down Barline at 1000mm, running on 240V mains, in black or white. Unlike the single-direction Barline, this version carries a light element at each end of the body, throwing one cone up the wall and one down it from a single fitting.

At a metre long this is an architectural fitting rather than an entry light. It suits large facades, feature walls and commercial frontages, where the two cones become a full-height wash rather than a decorative pair. It is not a fitting for a domestic pier — at this length it will dominate one.

Two elements, 30W total

The fitting carries two 15W elements, so it draws 30W in total. The 180° distribution spreads each cone across the wall rather than projecting it outward, and colour rendering is above 80 CRI.

It is a tri-colour fitting, with 3000K, 4000K or 5500K selected on the fitting at installation rather than fixed at manufacture. If several are being installed along a wall or across a facade, set them all at the same time — the selection is made per fitting, so a single unit on the wrong setting is both obvious and annoying to correct once everything is mounted.

240V, and what that changes

This version runs directly on 240V AC mains and requires no driver. It is Class 1, so an earth connection is required. That makes it the straightforward choice where a mains point already exists on the wall — no driver to house, no low-voltage cable to run, no capacity to calculate.

The same Barline is also made in a low-voltage version on its own listing, which suits an existing low-voltage garden system. If you are choosing between them, the deciding factor is what is already in the wall rather than anything about the light itself.

Construction, siting and installation

The body is aluminium with a Perspex diffuser, rated IP65 for dust and jetted water, so it handles a fully exposed wall. Rated lamp expectancy is >30,000 hrs and the LED is built in — nothing to buy alongside it, nothing to replace later.

Set out the full 1000mm before the cable outlet is fixed, since the body has to cover its own outlet. Mount it plumb: on an up/down fitting any lean is doubled visually, because the two cones diverge from the error rather than hiding it. Havit states that aluminium and 304 stainless fittings must not be installed within 5km of a salt water environment. Installation is work for a licensed electrician, and the fitting is not dimmable.

Frequently asked questions

Download Datasheet (PDF)

Download Datasheet (PDF)