Halo LED Wall Light RGBW 12w in Black or White Havit Lighting - HV3592RGBW

The 12 W RGBW Halo is the mid-size colour-changing disc: RGB mixing plus a dedicated 3000K white channel, in a fitting large enough to read as a feature on a broad wall. It is bought for the two-jobs-in-one reason — warm white on ordinary evenings, colour when the courtyard or pool wall is doing something for guests. At 300 lm it is brighter than the 7 W RGBW but still well short of the tri-colour Halos, because colour mixing always trades output. Treat it as the effect light on a wall, not the light that gets people to the door.

The 12 V requirement

HV3592RGBW-BLK and HV3592RGBW-WHT run on 12 V DC only. Each requires a 12 V DC LED driver rated for the combined load, and must never be connected directly to 240 V — that destroys the fitting and is not a warranty claim. As a Class III fitting no earth is required at the light itself.

Where it works

• Pool and spa walls, where colour carries into the water and doubles the effect.
• Courtyard entertaining walls, warm white nightly and colour for occasions.
• Rendered feature and blade walls, using the 180° beam to wash colour up and down.
• Exposed alfresco corners — IP65 handles direct rain, not just splash.

Specifying it

The 12 W LED is built in, so no globe is needed or possible. Output is 300 lm in RGB plus 3000K white, across a 180° beam. The body is aluminium in black or white with a polycarbonate diffuser, IP65 rated. Backed by a 3-year replacement warranty.

Planning the run

Sizing the driver for every RGBW fitting on the circuit before the walls close is the step worth insisting on — adding capacity later means opening finished render. Confirm your control method at the same time, since colour selection is set on the circuit rather than at the fitting.

Supplied and supported by Lights For You; at 300 lm this RGBW Halo is a feature light, so if it is your only entry light, pair it with the tri-colour HV3592T on the same elevation.