Flip LED Exterior Wall Light

The Flip is a 100 mm cube exterior wall light — integrated 5 W LED giving 500 lm, three colour temperatures — in black or white polycarbonate.

A 100 mm cube, and that is the design

100 × 100 × 100 mm. Not a lantern, not a bar — a plain cube. On a contemporary facade that geometry does what a decorative fitting cannot: it reads as part of the architecture. Repeated down a wall it becomes a rhythm rather than a row of lights.

500 lumens from 5 watts

100 lumens per watt — genuinely efficient, and enough to light an entry or graze a decent stretch of wall. It is not a marker.

Three colour temperatures, selectable

3000/4000/5000 K, chosen on the fitting rather than fixed at purchase. Warm at an entry, cooler along a driveway or a service wall. CRI >82.

Polycarbonate, so nothing corrodes

On a coastal or high-rainfall site that beats any painted metal — no rust bleeding down the render, no fixings weeping after two summers. 0.4 kg, so it hangs off an ordinary wall box.

Double insulated

Class II — no earth required, unusual outdoors, and it means fewer connections to make and fewer to corrode.

It does not dim

Stated plainly: no dimming. The colour temperature is the control you have.

Where it works

• Covered entries and porches.
• Contemporary facades, repeated in a run.
• Coastal sites — nothing to corrode.
• ⚠ Under cover — ask us before an exposed position.

Specifying it

100 × 100 mm, 100 mm projection, 0.4 kg, in polycarbonate, sand finish. Integrated 5 W LED giving 500 lm, included, switchable 3000/4000/5000 K, CRI >82. Not dimmable. 240 V, Class II — double insulated, no earth required, published as IP62 — the sheet says IP65; ask us. Warranty is three years, as a replacement warranty.

Supplied and supported by Lights For You.

Download Datasheet (PDF)