Elite 10 Watt Dimmable LED Downlight

The Elite is a ø100 mm dimmable LED downlight — 10 W for 860 lm at 5000 K, on a 60° beam, in black-and-nickel or white.

Genuinely dimmable, which not all downlights are

Plenty of LED downlights are fixed output. The Elite dims, so one circuit can be bright for cleaning and low for an evening. Check dimmer compatibility with us before you buy — that is where dimming problems come from, not from the fitting.

A 60° beam is the general-purpose angle

Wider than a 40° accent light, narrower than a 120° wash. At 60° a run of Elites gives even ceiling-to-floor coverage without scalloping, which is what you want for kitchens, hallways and living areas. Space them roughly to the ceiling height for an even result.

5000 K is cool white — choose deliberately

This version is 5000 K: crisp and bright, right for kitchens, laundries, garages and task areas. In a bedroom or lounge it will feel clinical. If you want warm light in the same fitting, ask us what else the Elite range offers.

90 mm cut-out

A 90 mm hole for a ø100 mm fitting — the most common downlight cut-out in Australian ceilings. If you are replacing existing downlights, measure the hole first: a 90 mm cut-out will not cover a larger existing one.

Black and nickel, or white

White disappears into a white ceiling. Black with a nickel trim is a deliberate mark — it reads as architectural, and it suits a dark or timber-lined ceiling where white would stand out.

Where it works

• Kitchens, laundries and utility areas.
• Hallways and living areas, in a run.
• Garages and workshops.
• Timber or dark ceilings, in black and nickel.

Specifying it

ø100 mm, 90 mm cut-out, recessed. 10 W LED giving 860 lm at 5000 K, beam 60°, CRI >84, dimmable. 240 V.

⚠ No warranty term is recorded in any of our sources for this downlight. Ask us before ordering and we will confirm it — on a fitting installed in a ceiling, the warranty is worth knowing in advance. Supplied and supported by Lights For You.