Domus Lighting Lighting Domus TWIN-SPOT-EM - 5W LED Twinspot Emergency Wall Light IP65 Lights-For-You 66108
Domus Lighting Lighting Domus TWIN-SPOT-EM - 5W LED Twinspot Emergency Wall Light IP65 Lights-For-You 66109
Domus Lighting Lighting Domus TWIN-SPOT-EM - 5W LED Twinspot Emergency Wall Light IP65 Lights-For-You
Domus Lighting Lighting Domus TWIN-SPOT-EM - 5W LED Twinspot Emergency Wall Light IP65 Lights-For-You 66108
Domus Lighting Lighting Domus TWIN-SPOT-EM - 5W LED Twinspot Emergency Wall Light IP65 Lights-For-You 66109
Domus Lighting Lighting Domus TWIN-SPOT-EM - 5W LED Twinspot Emergency Wall Light IP65 Lights-For-You
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 66109

Domus TWIN-SPOT-EM - 5W LED Twinspot Emergency Wall Light IP65

3 Years Warranty
3 Years Warranty
IP65 – suitable for outdoors
IP65 – suitable for outdoors
Soft ambient light
200 lm Learn More!!
Color: Black
$180.00
$238.00
$180.00
Product Description  
Product Description
x

The Domus TWIN-SPOT-EM is a wall-mounted twin-spot LED emergency light in white or black — two adjustable 2.5 W heads, IP65, a LiFePO₄ battery, and compliance to AS/NZS 2293.3.

This is a life-safety fitting, and it works differently from a normal light. It runs in non-maintained operation: the heads are off in normal use and come on only when mains power fails, running from the internal battery.

That is why it looks unlit on a wall — it is not faulty; it is waiting.

What the specification actually commits to
  • Emergency duration: 2 to 3 hours depending on the setting. ⚠ AS/NZS 2293 requires 90 minutes minimum for emergency lighting, so this exceeds it — but your certifier designs and signs off the scheme, not a product page.
  • Charge time: 16 to 24 hours. ⚠ That matters after an outage: a fitting that has just discharged is not fully ready again for up to a day.
  • Manual test switch and an LED indicator — ✅ which is what makes routine testing practical. AS/NZS 2293.2 requires periodic discharge testing, and a fitting without a test facility makes that a much larger job.
  • LiFePO₄ battery, easily replaceable. ✅ The battery is the part of any emergency fitting that fails first, and one that can be changed gives the fitting a far longer service life than one replaced whole.
  • 0–40 °C operating range — ⚠ check that against an unconditioned warehouse roof space in an Australian summer.
✅ Adjustable heads — the reason to choose twin spot over a bulkhead
  • Two independently aimable heads mean you can cover two directions from one fitting — an aisle and a doorway, or a walkway and a stair head.
  • In a warehouse or plant room, where the hazards are specific, aiming beats a general wash: you light the route and the obstacle, not the ceiling.
  • ⚠ Aim them as part of commissioning, with the certifier present, and check the result with the mains off. That is the only condition in which they will ever operate.
⚠ Two figures in our data that need settling
  • Output: our record says 200 lm; the datasheet says 300 lm. On an emergency fitting, output feeds directly into a compliance calculation — it is not a preference. Ask us to confirm before a project is certified.
  • Frequency: the datasheet records 60 Hz. Australia runs at 50 Hz. That is either a specification error or a figure carried across from another market. It is very unlikely to affect a modern electronic charger, but on a compliance fitting we would rather flag it than let it pass. Ask us.

IP65 — dust tight and protected against water jets. That is a genuinely useful rating on an emergency fitting: it allows washdown areas, covered loading docks, plant rooms and undercroft car parks, where a standard emergency light would not last.

6500 K — a cold white, which is correct here: in an emergency you want maximum contrast and visibility, not warmth. Warranty 3 years.

Where it works
  • Warehouses, industrial and commercial spaces.
  • Plant rooms, loading docks and washdown areas — IP65.
  • Escape routes where two directions need covering from one point.
  • ⚠ Non-maintained — it is dark until the power fails.
  • ⚠ Confirm the output figure before a project is certified.
Specifying it

Wall-mounted twin-spot LED emergency light, white or black, with two adjustable 2.5 W heads (5 W total) at 6500 K. ⚠ Output: our record says 200 lm, the datasheet says 300 lm — confirm before certification. Non-maintained operation. Emergency duration 2–3 hours; charge time 16–24 hours. LiFePO₄ battery, easily replaceable. Manual test switch and LED indicator. 240 V, 0–40 °C, IP65 — dust tight, protected against water jets. Fully compliant to AS/NZS 2293.3. Installation, design and certification remain with your certifier. Warranty 3 years.

Supplied and supported by Lights For You.

Questions
Why is it not lit?

Because it is non-maintained: the heads are off in normal use and come on only when mains power fails, running from the internal battery. A fitting sitting dark on a wall is waiting, not faulty.

How long does it run in an outage?

Two to three hours depending on the setting, which exceeds the 90-minute minimum AS/NZS 2293 requires. Note the charge time is 16 to 24 hours, so a fitting that has just discharged is not fully ready again for up to a day. Your certifier designs and signs off the scheme.

How bright is it?

Our sources disagree, and on an emergency fitting that matters — our record says 200 lumens and the datasheet says 300, and output feeds directly into a compliance calculation rather than being a preference. Ask us to confirm before a project is certified.

Why does the datasheet say 60Hz?

That is either a specification error or a figure carried across from another market — Australia runs at 50 Hz. It is very unlikely to affect a modern electronic charger, but on a compliance fitting we would rather flag it than let it pass. Ask us and we will confirm with Domus.

Why twin spots rather than a bulkhead?

Because you can aim them. Two independently adjustable heads cover two directions from one fitting — an aisle and a doorway, or a walkway and a stair head. In a warehouse or plant room where the hazards are specific, aiming beats a general wash: you light the route and the obstacle rather than the ceiling.

Can it go in a washdown area?

Yes — IP65 is dust tight and protected against water jets, which is genuinely useful on an emergency fitting. It allows washdown areas, covered loading docks, plant rooms and undercroft car parks, where a standard emergency light would not last.

How do I test it?

It has a manual test switch and an LED indicator, which is what makes routine testing practical — AS/NZS 2293.2 requires periodic discharge testing, and a fitting without a test facility turns that into a much larger job. The LiFePO₄ battery is also easily replaceable, and the battery is the part of any emergency fitting that fails first.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsTWIN-SPOT-EM — 66108 (White) · 66109 (Black)
TypeWall-mounted twin-spot LED emergency light — NON-MAINTAINED
HeadsTwo adjustable 2.5W (5W total) — aim two directions from one fitting
Lumen Output⛔ CONFLICT — our record says 200lm, the datasheet says 300lm. Confirm before certifying
Colour Temperature6500K — cold white, correct for emergency contrast
Emergency Duration2–3 hours (AS/NZS 2293 requires 90 minutes minimum)
Charge Time16–24 hours — ⚠ not fully ready again for up to a day after an outage
BatteryLiFePO₄ — ✅ easily replaceable
Testing✅ Manual test switch and LED indicator
IP RatingIP65 — dust tight, protected against water jets. Washdown areas and plant rooms
Operating Temp0–40°C — ⚠ check against an unconditioned roof space
Frequency⚠ Datasheet records 60Hz; Australia is 50Hz. Ask us
ComplianceFully compliant to AS/NZS 2293.3 — design and certification remain with your certifier
Warranty3 Years

Variant specifications

Emergency fittingTypeUse it for
TWIN-SPOT-EM — this oneNon-maintained twin spot, IP65Warehouses, plant rooms, washdown areas
EXIT-SM-24MExit sign, 24m viewingMarking the exit itself
EXIT-WPBOXIP65 / IK10 housingPutting an exit sign undercover outdoors
Data Sheet & Manual  
Data Sheet & Manual
x

This browser does not support PDFs. Please download the PDF to view it: Download PDF.

Download Datasheet (PDF)

Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More
Compare color
  • white
  • black
Click on color/pattern to compare, click and drag images to reorder

Recently Viewed

Customers Also Bought

Vendor
Example product title
From $164.00
$217.00
From $164.00
Vendor
Example product title
From $164.00
$217.00
From $164.00
Vendor
Example product title
From $164.00
$217.00
From $164.00
Vendor
Example product title
From $164.00
$217.00
From $164.00
Vendor
Example product title
From $164.00
$217.00
From $164.00
Vendor
Example product title
From $164.00
$217.00
From $164.00
Vendor
Example product title
From $164.00
$217.00
From $164.00
Vendor
Example product title
From $164.00
$217.00
From $164.00
Vendor
Example product title
From $164.00
$217.00
From $164.00
Vendor
Example product title
From $164.00
$217.00
From $164.00