Domus Lighting Suspension Wire Kit Domus SUSP 5M KIT / STS (each)
Domus Lighting Suspension Wire Kit Domus SUSP 5M KIT / STS (each)
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 22052

Domus SUSP 5M KIT / STS (each)

$28.95
$28.95
Product Description  
Product Description
x

The Domus SUSP 5M KIT is a 5 metre stainless steel suspension kit for track and linear fittings — sold each.

⭐ It publishes no length — and that is better than its siblings manage
  • ⭐ This record carries no length field at all. ⭐ Its three siblings do, and none of them is right:
Kit Title ⛔ Length recorded
SUSP 2M 2,000 mm ⛔ 2 mm
SUSP 3M 3,000 mm ⛔ 100 mm
TRAK-3 1.5M / 3.0M 1,500 / 3,000 mm ⛔ 100 mm both
⭐ SUSP 5M — this 5,000 mm ⭐ None published
  • ⭐⭐ AN ABSENT FIGURE IS LESS MISLEADING THAN A WRONG ONE. ⭐ Nobody filters or sorts on a blank; plenty of people would act on “2 mm”.
  • ⭐ THE TITLE IS THE RELIABLE SOURCE ACROSS ALL FOUR KITS. ⭐ This one suspends 5 metres.
⭐ Five metres is a specialist drop
  • ⭐ This is not a commercial-office dimension. ⭐ Five metres of drop belongs to warehouses, industrial sheds, sports halls, aircraft hangars and atria — spaces where the structure is 8 metres or more above the floor.
  • ⭐⭐ AT THAT LENGTH THE REASON IS ALMOST ALWAYS LIGHT LEVEL, NOT APPEARANCE. ⭐ Illuminance falls with the square of the distance, so bringing a fitting from 8 m to 3 m above the floor multiplies the light on the floor by roughly seven. ⭐ Suspending is often far cheaper than specifying a fitting powerful enough to work from the structure.
  • ⚠ SWAY IS A SERIOUS CONSIDERATION AT 5 METRES. ⭐ A long pendant drop moves in air currents from doors, extraction, and vehicle movement, and the amplitude grows with length. ⭐ On a run of fittings, adjacent units swaying out of phase is both visually obvious and mechanically wearing. ⭐ Lateral restraint is normal at this length and far easier to plan than to retrofit — ask us.
  • ⚠ AND CHECK THE FIXING ABOVE. ⭐ Five metres of wire, cable and fitting hanging from a purlin or a soffit is a real load applied at a real lever arm.
⭐ Stainless steel, which matters more here than on a short kit

⭐ The record specifies stainless steel construction. ⭐⭐ ON A 5 METRE DROP IN AN INDUSTRIAL SPACE THAT IS A GENUINE SPECIFICATION RATHER THAN A DETAIL. ⭐ Warehouses and workshops carry humidity, dust, forklift exhaust and sometimes chemical vapour — ⭐ and a suspension wire is a thin component under continuous tension where corrosion has a disproportionate effect. ⭐ A plated steel wire that would last decades in an office may not in a wash-down area.

⭐ Buy long and shorten

⭐ Suspension kits adjust downward, not upward. ⭐ A 5 metre kit can be set to hang at 3 m; a 3 metre kit can never reach 5. ⭐⭐ ON AN INDUSTRIAL BUILDING WHERE THE STRUCTURE HEIGHT IS OFTEN UNCERTAIN UNTIL SITE MEASURE, THAT ARGUES FOR THE LONGER KIT EVERY TIME. ⭐ The excess is coiled or trimmed at the canopy and costs nothing; a kit that is short costs a re-order and a crane or scissor lift booked twice.

⚠ Sold each, and a long run needs several

⭐ One kit suspends one point; a fitting needs at least two, and a continuous run needs one roughly every 1.5 to 2 metres to prevent sag. ⭐ ON A 20 METRE RUN THAT IS ELEVEN OR TWELVE KITS — ⭐ and at 5 metres each, that is also 100 metres of suspension wire and a meaningful installation time. ⭐ Tell us the run length and the structure height and we will work out the quantity.

⛔ What is not published

⭐ No datasheet, no maximum supported weight, no cable gauge, no compatible fitting list. ⭐⭐ AT FIVE METRES THE WEIGHT LIMIT IS NOT A FORMALITY. ⭐ A loaded three-circuit track with a dozen heads suspended five metres from a purlin is a different mechanical proposition from a light linear fitting, and it is the figure we would want confirmed before any order. ⭐ Tell us what you are hanging, the run length and the structure type, and we will confirm the kit suits.

✅ What is published
Specification Value
⭐ Suspension length ⭐ 5 metres — ⭐ from the title
⭐ Length field ⭐ None published — ⭐ better than its siblings' wrong values
Material ⭐ Stainless steel — ⭐ a real specification at this length
⭐ Adjustment ⭐ Downward only — ⭐ buy long and shorten
⚠ Sold ⚠ Each — ⭐ a 20 m run needs eleven or twelve
⭐ Spacing ⭐ One every ~1.5–2 m to prevent sag
⭐ Why suspend at all ⭐ 8 m to 3 m multiplies floor light by ~7
⚠ Sway ⚠ Serious at 5 m — ⭐ plan lateral restraint
⛔ Weight limit ⛔ Not published — ⭐ not a formality at this length
⛔ Datasheet / warranty ⛔ Neither published
Where it works
  • ⭐ Warehouses, industrial sheds, sports halls, atria.
  • ⭐ Where bringing fittings down beats specifying bigger ones.
  • ⭐ Humid, dusty or wash-down areas — ⭐ stainless.
  • ⚠ Not without lateral restraint on a long run.
  • ⛔ Not ordered before confirming the weight limit.
Specifying it

5 metre stainless steel suspension kit for track and linear fittings. Sold each. Adjustable downward. ⭐ IT PUBLISHES NO LENGTH FIELD, WHICH IS BETTER THAN ITS SIBLINGS MANAGE — the 2 M kit records 2 mm and both TRAK-3 kits record 100 mm regardless of being 1.5 m and 3.0 m. An absent figure is less misleading than a wrong one: nobody sorts on a blank, and plenty of people would act on "2 mm". ⭐⭐ AT FIVE METRES THE REASON TO SUSPEND IS LIGHT LEVEL, NOT APPEARANCE: illuminance falls with the square of distance, so bringing a fitting from 8 m to 3 m above the floor multiplies the light on the floor by roughly seven. ⚠ Sway is serious at this length — plan lateral restraint.

Supplied and supported by Lights For You.

Questions
How long is it?

Five metres, from the title. It publishes no length field at all — which is actually better than its siblings manage: the 2M kit records 2mm, the 3M records 100mm, and both TRAK-3 kits record 100mm despite being 1.5m and 3.0m. An absent figure is less misleading than a wrong one, because nobody sorts on a blank and plenty of people would act on "2mm".

Why suspend a fitting five metres?

For light level, not appearance. Illuminance falls with the square of the distance, so bringing a fitting from 8m to 3m above the floor multiplies the light on the floor by roughly seven. Suspending is often far cheaper than specifying a fitting powerful enough to work from the structure.

Is sway a problem at that length?

A serious one. A long pendant drop moves in air currents from doors, extraction and vehicle movement, and the amplitude grows with length. On a run of fittings, adjacent units swaying out of phase is both visually obvious and mechanically wearing. Lateral restraint is normal at this length and far easier to plan than to retrofit.

Does stainless steel matter here?

More than on a short kit. Warehouses and workshops carry humidity, dust, forklift exhaust and sometimes chemical vapour, and a suspension wire is a thin component under continuous tension where corrosion has a disproportionate effect. A plated steel wire that would last decades in an office may not in a wash-down area.

Should I buy exactly the length I need?

Buy longer. Kits adjust downward, not upward — a 5m kit can be set to hang at 3m, but a 3m kit can never reach 5. On an industrial building where the structure height is often uncertain until site measure, that argues for the longer kit every time: the excess is coiled or trimmed at the canopy and costs nothing, where a short kit costs a re-order and a scissor lift booked twice.

How many will I need?

More than most people expect. One kit suspends one point, a fitting needs at least two, and a continuous run needs one roughly every 1.5 to 2 metres to prevent sag. On a 20 metre run that is eleven or twelve kits — and at five metres each, that is also 100 metres of suspension wire and a meaningful installation time.

What is not published?

No datasheet, no maximum supported weight, no cable gauge and no compatible fitting list. At five metres the weight limit is not a formality: a loaded three-circuit track with a dozen heads suspended five metres from a purlin is a different mechanical proposition from a light linear fitting. Tell us what you are hanging, the run length and the structure type and we will confirm the kit suits.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUSUSP 5M KIT / STS — 22052 (each)
⭐ Suspension length⭐ 5 metres — ⭐ from the title
⭐ Length field⭐ NONE published
⭐⭐ WHICH BEATS ITS SIBLINGS⛔ 2M records 2 mm · ⛔ both TRAK-3 kits record 100 mm
⭐ An absent figure beats a wrong one⭐ Nobody sorts on a blank — ⚠ people act on "2 mm"
⭐⭐ WHY SUSPEND AT 5 m — LIGHT LEVEL⭐ Illuminance falls with the SQUARE of distance
⭐ 8 m down to 3 m⭐ Multiplies floor light by roughly SEVEN
⭐ Often cheaper than a bigger fitting⭐ Which is the real argument
⚠ SWAY IS SERIOUS AT THIS LENGTH⭐ Amplitude grows with length — ⭐ plan lateral restraint
⭐ Stainless steel matters here⭐ A thin component under continuous tension in humid, dusty air
⭐⭐ BUY LONG AND SHORTEN⭐ Structure height is often uncertain until site measure
⚠ A 20 m run needs 11–12 kits⭐ And 100 m of suspension wire
⛔ Weight limit not published⭐ Not a formality at 5 m from a purlin

Variant specifications

KitTitle⛔ Length field
SUSP 2M2,000 mm⛔ 2 mm
SUSP 3M3,000 mm⛔ 100 mm
TRAK-3 ×21,500 / 3,000⛔ 100 mm both
⭐ SUSP 5M5,000 mm⭐ None
Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
$28.95
$28.95
Vendor
Example product title
$28.95
$28.95
Vendor
Example product title
$28.95
$28.95
Vendor
Example product title
$28.95
$28.95
Vendor
Example product title
$28.95
$28.95
Vendor
Example product title
$28.95
$28.95
Vendor
Example product title
$28.95
$28.95
Vendor
Example product title
$28.95
$28.95
Vendor
Example product title
$28.95
$28.95
Vendor
Example product title
$28.95
$28.95