Domus STRIP COB KIT IP44 6W P/M Dual Colour 3K/4K

The Domus STRIP COB KIT is a complete dual-colour strip kit — 6 W per metre, 608 LEDs per metre, CRI ≥90, IP44, switchable 3000/4000 K, in 2 metre or 5 metre lengths.

⭐⭐ This product corrected a finding we had already published

• ⭐ Earlier in this programme we reported that five strip products publish 240 V on 24 V DC products, and called it an error in each case. ⭐ This was one of the five.
• ⭐⭐ IT IS A KIT, AND ITS OWN DATASHEET ALSO SAYS 240 V AC. ⭐ On the other four, the sheet says 24 V DC and only the record says 240 — a genuine contradiction. ⭐ Here both agree.
• ⭐ A KIT WITH AN INCLUDED DRIVER LEGITIMATELY TAKES 240 V AS ITS INPUT. ⭐ The 240 V is what you connect to the wall; whatever the strip itself runs at is downstream of the driver. ⭐ Both figures can be true and describe different things.
• ⭐ SO THE CORRECT COUNT IS FOUR, NOT FIVE. ⭐ We have corrected it. ⭐ The lesson is that a field flagged as wrong on a component is not necessarily wrong on a kit — ⭐ the product's form changes what the number means.

⭐ What "kit" actually gets you, and why it matters here

• ⭐ Everywhere else in this catalogue, LED strip is sold as a component: strip only, driver required, profile mandatory, connectors separate. ⭐ Ordering a working installation means assembling four purchases and getting each of them right.
• ⭐⭐ A KIT COLLAPSES THAT INTO ONE ORDER. ⭐ For a short run — a single cabinet, a shelf, a bathroom mirror — that is worth a great deal more than the price difference, because the failure mode on a component order is not cost but a missing part discovered on site.
• ⭐ THE TRADE IS FLEXIBILITY. ⭐ Fixed at 2 or 5 metres, fixed at 6 W, fixed at IP44. ⭐ If the run is 7 metres, or needs to be brighter, or goes somewhere wetter, the component route is the one that reaches it.
• ⭐ Confirm with us what the kit contains before ordering — ⭐ the listing does not itemise it, and whether a profile is included is the question that most often matters.

⭐ CRI ≥90 at 6 W — a sensible specification for close work

⭐ 610 lm at 3000 K and 715 at 4000 K, so about 102 to 119 lumens per watt. ⭐ THAT IS GOOD EFFICIENCY FOR CRI ≥90 — ⭐ high colour rendering usually costs output, because the phosphors that fill in the spectrum absorb light doing it. ⭐ CRI ≥90 is the right call for the positions a short strip kit goes: under a wall cabinet where food is prepared, beside a mirror where faces are looked at, inside a wardrobe where clothes are matched. ⭐ A CRI 80 strip is brighter per watt and visibly worse at all three.

⭐ 608 LEDs per metre — genuinely dotless

⭐ At 608 per metre the spacing is about 1.6 mm, which reads as a continuous line rather than points. ⭐ THAT MATTERS MOST IN EXACTLY THE POSITIONS A KIT SUITS — ⭐ a short run under a cabinet is seen close up and often reflected in a benchtop or a splashback, where individual LEDs would be obvious. ⚠ The 120° beam is narrower than the 180° of the bare COB strips elsewhere in this range, ⭐ which suggests the kit includes a profile or diffuser shaping the output.

⛔ Not dimmable, and IP44

• ⭐ The sheet says dimmable = No. ⚠ Do not put it on a dimmer — a non-dimmable driver on a dimmer circuit will flicker, buzz or fail. ⭐ The dual colour switch is the only adjustment.
• ⭐ IP44 is splash-protected from any direction. ⭐ That covers under a kitchen cabinet, a bathroom mirror surround and a laundry. ⛔ It does not cover hosing, standing water or an outdoor position.
• ⭐ 50,000 hours at four hours a day is around 34 years, ⭐ so the strip is not the part that will decide when this is replaced.

⛔ Made to order, cut to length

No lead time is published. Call our team to confirm. ⭐ We will.

✅ What is published

Where it works

• ⭐ Under wall cabinets — ⭐ CRI ≥90 over a food surface.
• ⭐ Bathroom mirror surrounds — ⭐ IP44.
• ⭐ Wardrobes and shelves — ⭐ one order, no missing parts.
• ⛔ Not on a dimmer.
• ⚠ Not for a 7 m run — ⭐ the component route reaches it.

Specifying it

Dual-colour COB LED strip kit. 6 W per metre, 240 V AC input. 610 lm at 3000 K, 715 lm at 4000 K, switchable. 608 LEDs per metre, dotless. CRI ≥90. 120° beam. IP44. Not dimmable. 50,000 hrs. 2 m or 5 m. ⭐⭐ THIS PRODUCT CORRECTED ONE OF OUR OWN FINDINGS. We had reported five strip products wrongly publishing 240 V on 24 V DC products, and this was one of the five — but it is a KIT, and its own datasheet also says 240 V AC. A kit with an included driver legitimately takes 240 V as its input, so both figures are true and describe different things. THE CORRECT COUNT IS FOUR. ⭐ The lesson is that a field flagged as wrong on a component is not necessarily wrong on a kit: the product's form changes what the number means.

Supplied and supported by Lights For You.

Download Datasheet (PDF)