Domus PLEX-ULTRA 10W P/M COB Strip 24V CRI90 IP54 560LED/M 50M Pack

The Domus PLEX-ULTRA is a 24 V COB LED strip — 10 W per metre, 560 LEDs per metre, CRI ≥90, IP54, 50 m pack, at 770 / 790 / 810 lm per metre.

⭐⭐ Fifty metres of dotless light in two runs

• ⭐ At a 26 m two-end limit, fifty metres is two runs, one cut and two drivers.
• ⭐ Every other dotless strip in the range runs 5 m one-end and 10 m two-end, so the same fifty metres would be five runs, four cuts and five drivers.

• ⭐⭐ THREE FEWER DRIVERS AND THREE FEWER PLACES TO HOUSE THEM, ON A LINE THAT LOOKS IDENTICAL. ⭐ On a fifty metre order that is the single largest practical difference available in this catalogue between two dotless products. ⚠ And nothing states it.
• ⭐ Two drivers of about 270 W each on 25 m runs. ⚠ Large units, but two ventilated accessible locations rather than five.

⭐ 500 W and about 40,000 lumens

⭐ Fifty metres at 10 W is 500 W, giving 38,500 to 40,500 lumens. ⭐ That is a substantial installation wanting its own circuit. ⭐ For comparison, the same fifty metres of PLEX-COB-5 is 250 W and about 25,000 lumens on five drivers — ⭐ so ULTRA gives 60% more light on 40% of the drivers. ⚠ It costs more per metre, which is the trade.

⚠ 2700 K is published but not sold

⭐ The datasheet lists 2700 K at 670 lm per metre and names it in the colour-temperature field. ⛔ This listing sells 3000, 4000 and 5000 K. ⭐ So an extra-warm PLEX-ULTRA exists as a specification with no ordering path. ⭐ On a fifty metre domestic job where 2700 K is the wanted colour, that is worth a phone call rather than a compromise.

⭐ One roll is one batch, and at this length that is the point

⭐ Fifty metres is a single production run, so both 25 m lengths come from the same batch. ⭐ On a dotless strip the join between two runs is already nearly invisible; matching batches makes it entirely so. ⭐ Beyond fifty metres, ask us for consecutive rolls — free to request, impossible afterwards.

⛔⛔ Fifty metres of mandatory profile

⭐ The sheet requires an aluminium heat sink in capitals and voids the warranty without it. ⭐ On a 25 m run that means jointed extrusion, and the joints want to fall where they will not be noticed. ⛔ None of the catalogue's 47 profiles names this strip. ⭐ Ask us to quote both and to plan the joint positions.

✅ What is published

⛔ Made to order, cut to length

No lead time is published. Call our team to confirm. ⭐ We will.

Where it works

• ⭐⭐ Long visible dotless perimeters — ⭐ two drivers, not five.
• ⭐ Whole-floor coves and shadow gaps.
• ⭐ Retail and hospitality lines people look at.
• ⛔ Never without profile.
• ⚠ Not in 2700 K — ⭐ ask us.

Specifying it

COB LED strip, IP54, 50 m pack. 10 W per metre at 24 V DC, 500 W total, ≈40,000 lm. 560 LEDs per metre, dotless. CRI ≥90. 180° beam. 25 mm cutting increment. Continuous run 13 m one-end, 26 m two-end. Aluminium heat sink mandatory. 3-year warranty. ⭐⭐ FIFTY METRES OF DOTLESS LIGHT IN TWO RUNS — which no other dotless product here can do. Every other dotless strip runs 10 m on a two-end feed, so the same fifty metres would be five runs, four cuts and five drivers. THREE FEWER DRIVERS AND THREE FEWER PLACES TO HOUSE THEM, ON A LINE THAT LOOKS IDENTICAL. ⭐ It also gives 60% more light than fifty metres of PLEX-COB-5 on 40% of the drivers. ⚠ It costs more per metre, which is the trade.

Supplied and supported by Lights For You.