Domus PLEX-MICRO 8W P/M COB Strip 24V CRI90 IP54 480LED/M 50M

The Domus PLEX-MICRO is a 24 V COB LED strip — under 10 mm wide, 8 W per metre, CRI ≥90, IP54, 50 m, at 640 / 680 / 720 lm per metre.

⚠ Fifty metres of a strip whose run limit is five

• ⭐ PLEX-MICRO runs 5 m from one end and 10 m from two. ⭐ So fifty metres is five runs on two-end feeds, or ten on one-end.
• ⭐ That is the most fragmented long order in the range. ⭐ Compare the same fifty metres of PLEX-SMD-5, which runs 40 m per feed: two runs.

• ⭐⭐ SO THE HONEST QUESTION ON A FIFTY METRE ORDER IS WHETHER IT ALL NEEDS TO BE MICRO. ⭐ This strip earns its place where the gap is under 10 mm. ⚠ Where the gap is standard, a standard strip runs further, costs less and needs fewer drivers.
• ⭐ MIXING IS THE SENSIBLE ANSWER on a large job: MICRO in the tight reveals, standard PLEX-COB everywhere else. ⭐ Both are dotless and both are CRI ≥90, so they look consistent together. ⚠ Match the colour temperature and order from one batch and the join is invisible.
• ⭐ Tell us the runs and where the narrow ones are, and we will split the order.

⭐ What fifty metres actually is

⭐ 400 W total, ⭐ about 34,000 lumens, ⭐ five drivers of about 100 W each on two-end feeds, and fifty metres of narrow aluminium profile. ⛔ The profile is mandatory — the sheet voids the warranty without a heat sink — and on this strip it has to be narrow, which is a smaller subset of the catalogue's 47 profiles than usual. ⭐ Confirm the profile before ordering the strip.

⭐ One roll is one batch, and on a narrow strip that matters more

⭐ Fifty metres is a single production run. ⭐ Narrow strips sit closer to what they light — a shelf edge is inches from the surface below it — so any colour difference between batches is seen at short range against a plain surface, which is the least forgiving way to view it. ⭐ Beyond fifty metres, ask us for consecutive rolls from one batch.

✅ What is published

⛔ Made to order, cut to length

No lead time is published. Call our team to confirm. ⭐ We will.

Where it works

• ⭐ Projects with many narrow reveals — ⭐ one batch throughout.
• ⭐ Shelf edges and shadow gaps at scale.
• ⭐ Mixed with standard strip — ⭐ MICRO only where needed.
• ⛔ Never without a narrow profile.
• ⚠ Not as a blanket choice — ⭐ five drivers against one.

Specifying it

Narrow COB LED strip under 10 mm wide, IP54, 50 m. 8 W per metre at 24 V DC, 400 W total, ≈34,000 lm. 480 LEDs per metre, dotless. CRI ≥90. 180° beam. 50 mm cutting increment. Continuous run 5 m one-end, 10 m two-end. Aluminium heat sink mandatory. 3-year warranty. ⚠ FIFTY METRES OF A STRIP WHOSE RUN LIMIT IS FIVE — five runs and five drivers on two-end feeds, against ONE run and ONE driver for the same fifty metres of PLEX-SMD-5. ⭐ SO THE HONEST QUESTION IS WHETHER IT ALL NEEDS TO BE MICRO: this strip earns its place where the gap is under 10 mm, and a standard strip runs further and costs less everywhere else. ⭐ MIXING IS THE SENSIBLE ANSWER on a large job — both are dotless and CRI ≥90, so they look consistent together.

Supplied and supported by Lights For You.