Domus PLEX-COB Tuneable IP20 Live Cable Connector 5 Pack

The Domus PLEX-COB Tuneable IP20 Live Cable Connector is a solderless strip-to-driver connector for tuneable-white strip — 500 mm or 2000 mm tail, 5 pack.

⭐⭐ Domus HAS a way of saying “this does not light on its own” — 28 listings use it

• ⭐ Across the catalogue, 28 listings end their title with “DRIVER REQUIRED”, in capitals — ⭐ COB strips, garden spike lights, path lights and a replaceable-globe fitting.
• ⭐ That is a genuinely good convention. ⭐ It tells a buyer before they click that the product is one part of an assembly.
• ⛔ It is not applied where it matters most. ⭐ The Micro, Nova and Omega aluminium PROFILES need a strip AND a driver — two separate purchases — and their titles say neither. ⚠ A customer can buy one and receive an empty extrusion.
• ⭐ Nor is it applied to this connector range, ⭐ which is a third part of the same assembly. ⚠ A strip page names no connector; a connector page names no strip; and neither names a driver.
• ⭐ THE POINT: this is an actionable fix rather than a missing capability. ⭐ Domus already writes the warning, applies it deliberately, and uses capitals to make it unmissable. ⭐ Extending it to the profiles and accessories would close the largest single information gap this catalogue has.

⭐ A complete tuneable installation — four purchases

⭐ The conductor count is why this connector is tuneable-specific: ⭐ single colour needs two conductors, TUNEABLE needs three (a common plus warm and cool), RGB needs four and RGBTW six. ⚠ A single-colour connector on a tuneable strip cannot carry the second white channel.

⛔ IP20 on a strip sold as IP54 and IP67

⭐ This connector is IP20 — no water protection. ⚠ An assembly is rated at its weakest point, ⭐ so put the connection somewhere dry: a cabinet, above a ceiling, behind a sealed panel. ⛔ Nothing published addresses the combination.

⭐ Take the 2000 mm tail

⭐ A tuneable run needs a driver AND a controller, ⭐ which is two pieces of equipment rather than one. ⚠ 500 mm rarely reaches a position with room for both. ⭐ Solderless, a pair of pliers, 4.64 kgf pulling force, and it fits inside the profile.

⛔ Made to order — and the “cut to length” part is not about this product

Domus flags this as made to order, so it is not held on a shelf. ⛔ No lead time is published. Call our team to confirm before ordering. ⭐ We will. ⚠ The flag also says “cut to length”, from a generic sentence about the STRIP — ⭐ a connector cannot be cut to length.

✅ What is published

Where it works

• ⭐ Terminating tuneable strip on site — ⭐ no iron needed.
• ⭐ Feed points inside the profile.
• ⭐ Where the driver and controller are up to 2 m away.
• ⛔ Not in a wet position — ⚠ IP20.
• ⛔ Not on a single-colour or RGB strip — ⚠ wrong conductor count.

Specifying it

Solderless IP20 live cable connector for PLEX-COB tuneable-white LED strip, 5 pack. 500 mm or 2000 mm tail. Pliers only. Pulling force 4.64 kgf. Fits inside the profile. ⭐⭐ 28 DOMUS TITLES END WITH "DRIVER REQUIRED" IN CAPITALS — so the convention for saying "this does not light on its own" EXISTS, is applied deliberately, and is written to be unmissable. ⛔ IT IS NOT APPLIED TO THE PROFILES, which need a strip AND a driver and say neither, nor to this connector range, which is a third part of the same assembly. ⭐ That makes it an actionable fix rather than a missing capability — extending it would close the largest single information gap this catalogue has.

Supplied and supported by Lights For You.