Domus Lighting LED Strip Domus PLEX-COB-15-IP67 Strip IP67 CRI90 24V 640LED/M 5M Pack
Domus Lighting LED Strip Domus PLEX-COB-15-IP67 Strip IP67 CRI90 24V 640LED/M 5M Pack
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 24104

Domus PLEX-COB-15-IP67 Strip IP67 CRI90 24V 640LED/M 5M Pack

IP67 – waterproof to 1m depth
IP67 – waterproof to 1m depth
$185.95
$185.95
Product Description  
Product Description
x

The Domus PLEX-COB-15-IP67 is a 24 V COB LED strip — 15 W per metre, 640 LEDs per metre, CRI90, IP67, 5 m pack, in 3000, 4000 or 5000 K.

⭐ Task-level light in a wet area, with the seal intact
  • ⭐ Two things combine here that usually pull against each other. ⭐ 15 W per metre is a WORKING level — enough to light a surface rather than wash it. ⭐ IP67 is a genuinely waterproof rating.
  • ⭐⭐ And the 5 m format keeps them together. ⭐ The published run limit is 5 m from one feed, so one pack is one run and needs NO intermediate cut — ⭐ which matters because IP67 in this range comes from a continuous silicon coating that every cut breaks.
  • ⭐ So this is the one configuration that delivers bright, wet-rated task light with the rating intact from end to end. ⚠ A 20 m roll of the same strip would have three cuts in it.
  • ⭐ WHERE THAT COMBINATION IS ACTUALLY WANTED: a commercial kitchen pass, a wet-room vanity, a laundry bench, a bar under-counter — ⭐ places that are worked at AND washed down.
⭐ 75 W in five metres — the driver is the constraint

⭐ Five metres at 15 W is 75 W, so a 90 W driver with headroom. ⚠ That is a substantial object, and it is NOT rated for the wet area the strip is in. ⭐ So the driver has to live somewhere dry and the tail has to reach it — ⭐ a cupboard, a services void, the dry side of a wall. ⚠ In a compact wet room that is the constraint that decides the layout, ⭐ and it is worth solving before the tiling goes on.

⚠ And the terminations are the weak point
  • ⭐ Even used whole with no intermediate cut, the strip is terminated at each end — ⭐ and a termination opens the coating.
  • ⛔ The PLEX-COB connectors are described for “all our IP54 COB strip”, and the IP67 strip is not named. ⛔ Nor are the connectors themselves rated above IP20.
  • ⭐⭐ SO AN IP67 STRIP TERMINATED WITH AN IP20 CONNECTOR IS AN IP67 STRIP WITH TWO UNRATED ENDS. ⭐ An assembly is rated at its weakest point.
  • ⭐ THE ANSWER IS LAYOUT, NOT PRODUCT: put both terminations somewhere dry — behind the wall, inside the cabinet, above the ceiling — and let only the sealed middle sit in the wet zone. ⚠ Nothing published says this, and it is the single most important decision on a wet-area strip run.
✅ What is published
Specification Value
Load 15 W per metre — ⭐ 75 W for the pack
⭐ Driver sizing ⭐ ≈90 W — ⚠ and it must sit somewhere dry
IP rating ⭐ IP67 — ⭐ silicon coated, ⭐ intact if used whole
⭐ Cuts required ⭐ None — ⭐ 5 m pack = one run
⭐ LED density ⭐ 640 per metre — dotless
Colour rendering ⭐ CRI90
Colour temperature 3000 / 4000 / 5000 K
⛔ Connector rating ⛔ IP20 — ⚠ two unrated ends
⛔ Warranty · beam · dimmable ⛔ Not on this line — ⭐ 3 years, 180°, yes
⛔ Driver ⛔ Required, not included
⛔ Made to order, cut to length

No lead time is published. Call our team to confirm. ⭐ We will.

Where it works
  • ⭐ Commercial kitchen passes and bar under-counters — ⭐ worked at and washed down.
  • ⭐ Wet-room vanities and laundry benches.
  • ⭐ Where the seal must stay intact — ⭐ one pack, no cuts.
  • ⛔ Not with terminations in the wet zone.
  • ⚠ Not where the driver has nowhere dry to live.
Specifying it

COB LED strip, IP67 silicon coated, 5 m pack. 15 W per metre at 24 V DC, 75 W total. 640 LEDs per metre, dotless. CRI90. 3000, 4000 or 5000 K. Driver required, approximately 90 W. 3-year warranty. ⭐ TASK-LEVEL LIGHT IN A WET AREA, WITH THE SEAL INTACT — 15 W per metre lights a surface rather than washing it, IP67 is genuinely waterproof, and the 5 m pack matches the 5 m run limit so no intermediate cut is needed. ⭐⭐ BUT THE TERMINATIONS ARE THE WEAK POINT: the connectors are IP20 and described for the IP54 strip, so an IP67 strip terminated with them has TWO UNRATED ENDS. ⭐ The answer is layout, not product — put both terminations somewhere dry and let only the sealed middle sit in the wet.

Supplied and supported by Lights For You.

Questions
What makes this combination useful?

Two things that usually pull against each other. 15W per metre is a working level — enough to light a surface rather than wash it. IP67 is a genuinely waterproof rating. And the 5m format keeps them together, because the published run limit is 5 metres from one feed, so one pack is one run and needs no intermediate cut.

Why does avoiding cuts matter here?

Because IP67 in this range comes from a continuous silicon coating, and every cut breaks it. A 20m roll of the same strip would have three cuts in it. This is the one configuration that delivers bright, wet-rated task light with the rating intact from end to end.

Where is that combination actually wanted?

Places that are worked at and washed down: a commercial kitchen pass, a wet-room vanity, a laundry bench, a bar under-counter. Anywhere you need to see what you are doing and the surface gets cleaned properly afterwards.

What about the driver?

It is the constraint. Five metres at 15W is 75W, so a 90W driver with headroom — a substantial object, and one that is not rated for the wet area the strip is in. So it has to live somewhere dry and the tail has to reach it: a cupboard, a services void, the dry side of a wall. In a compact wet room that decides the layout, and it is worth solving before the tiling goes on.

So is the installation fully IP67?

Not at the ends. Even used whole with no intermediate cut, the strip is terminated at each end, and a termination opens the coating. The PLEX-COB connectors are described for "all our IP54 COB strip", the IP67 strip is not named, and the connectors themselves are only IP20. An assembly is rated at its weakest point, so an IP67 strip terminated with IP20 connectors has two unrated ends.

What do I do about that?

It is a layout answer rather than a product one. Put both terminations somewhere dry — behind the wall, inside the cabinet, above the ceiling — and let only the sealed middle sit in the wet zone. Nothing published says this, and it is the single most important decision on a wet-area strip run.

Will I see individual LEDs?

No — 640 per metre, one every 1.56mm, dotless. That density is constant across all four PLEX-COB wattages, so you can change the wattage without changing how the line looks.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsPLEX-COB-15-IP67 5M Pack — 24104 3000K, 24105 4000K, 24106 5000K
⭐ TASK LEVEL **plus** WET RATING⭐ Two things that usually pull against each other
⭐ 15 W/m lights a surface⚠ Rather than washing it
⭐⭐ AND THE 5 m PACK KEEPS THEM TOGETHER⭐ 5 m pack = 5 m run limit = ⭐ NO intermediate cut
⭐ Which matters because⭐ IP67 is a continuous silicon coating that every cut breaks
⚠ A 20 m roll of the same stripWould have THREE cuts in it
⭐ Where the combination is wantedKitchen passes · wet-room vanities · laundry benches · bar under-counters
⚠ THE DRIVER IS THE CONSTRAINT⭐ 90 W — ⚠ and NOT rated for the wet area the strip is in
⭐ So it lives somewhere dry⭐ And the tail must reach — ⚠ solve it before the tiling
⭐⭐ AND THE TERMINATIONS ARE THE WEAK POINT⛔ Connectors are IP20, described for IP54 strip
⭐ An assembly is rated at its weakest point⚠ So an IP67 strip gets TWO UNRATED ENDS
⭐⭐ THE ANSWER IS LAYOUT, NOT PRODUCT⭐ Both terminations DRY — ⭐ only the sealed middle in the wet

Variant specifications

PartRating⭐ Where it goes
⭐ The strip middle⭐ IP67 sealed⭐ In the wet zone
⛔ Terminations⛔ IP20⭐ Somewhere dry
⚠ The driver⚠ Unrated⭐ A dry cupboard
Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
$185.95
$185.95
Vendor
Example product title
$185.95
$185.95
Vendor
Example product title
$185.95
$185.95
Vendor
Example product title
$185.95
$185.95
Vendor
Example product title
$185.95
$185.95
Vendor
Example product title
$185.95
$185.95
Vendor
Example product title
$185.95
$185.95
Vendor
Example product title
$185.95
$185.95
Vendor
Example product title
$185.95
$185.95
Vendor
Example product title
$185.95
$185.95