Domus PLEO-VIVID Neon 9.6W 24V CRI90 1m

The Domus PLEO-VIVID is a 24 V fixed-colour LED neon flex — 9.6 W per metre, 140 SMD LEDs per metre, 165° beam, IP67, 1 m, in red, blue, green or yellow.

⛔⛔ Its title says CRI90. A red LED does not have a CRI.

• ⭐ CRI — colour rendering index — measures how faithfully a WHITE source renders a set of reference colours compared with a reference white of the same colour temperature.
• ⛔ A saturated single-colour emitter has no colour temperature and renders nothing. ⭐ Under a red light everything is red or black. ⭐ The measurement is not low; it is UNDEFINED.
• ⭐ So the CRI90 in this title is inherited from the white PLEO range, which shares the naming convention. ⚠ It describes nothing about this product.
• ⭐ We measured the scope: 55 Domus listings carry a CRI figure in their title, and SIX of them are fixed-colour or colour-mixing products that cannot have one. ⭐ All six are PLEO-VIVID. ⭐ So it is a specific naming fault rather than a systemic one.
• ⭐ WHAT TO ASK FOR INSTEAD, if colour quality matters: the DOMINANT WAVELENGTH. ⭐ That is the figure that describes a saturated colour — roughly 620–630 nm for a red, 465–470 for a blue, 520–525 for a green. ⚠ It is not published, ⭐ and on a branded or matched-colour job it is the one that matters, because two “reds” from different batches can be visibly different.

⭐ What VIVID actually is, and when to use it over RGB

• ⭐ The saturation point is the real one. ⭐ A dedicated red emitter produces a deeper, cleaner red than three emitters mixed toward red — ⚠ which on brand colours and signage is the difference between right and nearly right.
• ⭐ And it is simpler to install: a driver, and nothing else. ⭐ No controller, no programming, nobody who needs to know how to operate it afterwards.

⭐ 165° beam — wide, and what that suits

⭐ Domus publishes 165° for this version — ⭐ very wide, close to a full hemisphere. ⭐ That suits an OUTLINE seen from many angles: a facade edge, a sign border, a soffit line viewed from the street. ⚠ It is not a directional product — ⭐ it will not throw light onto a surface so much as be seen as a line itself. ⭐ The Micro version publishes 110°, which is noticeably tighter.

✅ What is published

⛔ Made to order, cut to length

No lead time is published. Call our team to confirm. ⭐ We will.

Where it works

• ⭐ Signage, outlines and facade edges — ⭐ what it is designed for.
• ⭐ Brand colours — ⭐ deeper saturation than RGB.
• ⭐ Where nobody will operate a controller — ⭐ a driver is all it needs.
• ⛔ Not where the colour must change — ⭐ take RGB.
• ⚠ Not matched to a brand colour without the wavelength.

Specifying it

Fixed-colour 24 V DC LED neon flex, 1 m. 9.6 W per metre. 140 SMD LEDs per metre, cut in 50 mm increments. 165° beam. IP67. Dimmable with a suitable driver. Red, blue, green or yellow. 3-year warranty. Order code PLEO-VIVID-T. ⛔ ITS TITLE CLAIMS CRI90 AND A RED LED DOES NOT HAVE A CRI — the measurement compares a WHITE source against a reference white, and under a saturated red everything is red or black. It is not low; it is UNDEFINED. ⭐ Six of the 55 Domus listings carrying a CRI figure are colour products that cannot have one, and all six are VIVID. ⭐ WHAT TO ASK FOR INSTEAD IS THE DOMINANT WAVELENGTH — the figure that describes a saturated colour, and the one that matters on a branded job.

Supplied and supported by Lights For You.

Download Datasheet (PDF)