Domus Lighting LED Neon Flex Domus Pleo 6.5X11MM Rigid Profile 3000mm
Domus Lighting LED Neon Flex Domus Pleo 6.5X11MM Rigid Profile 3000mm
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 21926

Domus Pleo 6.5X11MM Rigid Profile 3000mm

$52.95
$52.95
Product Description  
Product Description
x

The Domus PLEO 6.5×11 mm Rigid Profile is an aluminium channel for PLEO neon flex and LED strip — 3 m lengths, with mounting clips, in polished aluminium.

⭐ Which profile takes which flex — the pairing nothing states
  • ⭐ Domus sells the Pleo profiles in three sections — 4 × 8, 6.5 × 11 and 10 × 10 mm — ⭐ and the PLEO flex in sections named the same way. ⭐ The naming is the clue, and it is a good one.
  • ⭐ Two flex listings in the range carry a section in their own titles: a 6.5 × 11 mm side view and a 10 × 10 mm top view. ⭐ So the 6.5 × 11 profile is made for the 6.5 × 11 flex, ⭐ and this is that profile.
  • ⚠ But no listing says so explicitly, on either side. ⛔ No profile names a compatible flex; no flex names a compatible profile. ⭐ The match has to be made by reading the two numbers.
  • ⭐ Which is workable but fragile. ⚠ A 6.5 mm-wide flex in a 10 mm channel rattles and sits crooked; ⚠ a 10 mm flex will not enter a 6.5 mm one at all. ⭐ Tell us the flex and we will confirm the profile.
⭐ Do you even need a profile? Sometimes not.
  • ⭐ PLEO flex is IP67 in a polyurethane enclosure and comes with its own mounting clips. ⭐ It is a complete, weatherproof, self-supporting product — ⚠ unlike a bare LED strip, which needs a channel to survive.
  • ⭐ So a profile is OPTIONAL here, and it is worth knowing what it actually buys you:
    • ⭐ A straight line. ⭐ Flex follows whatever it is clipped to; a rigid profile corrects the substrate. ⭐ Over a long straight run on imperfect joinery that is the main reason.
    • ⭐ A finished edge. ⭐ In a reveal or a recess, an aluminium channel gives a crisp shadow line where bare flex gives a soft one.
    • ⭐ Physical protection at low level or anywhere it can be knocked.
    • ⭐ A recess detail — ⭐ the Pleo profile does recessed OR surface from one part.
  • ⚠ What it does not buy you is diffusion. ⭐ The flex is already a diffused line — ⭐ which is the opposite of the bare-strip case, where the profile's depth is doing the optical work.
⭐ Rigid, 3 m — and what that suits

⭐ A rigid profile in a 3 m stick is for one long straight run — ⭐ fewer joints than metreage, and a straightedge that corrects a bowed substrate. ⚠ For a curve, the bendable version of the same section is the answer; ⚠ for several short runs, the per-metre listing quotes the job better. ⭐ Tell us the run lengths and the number of runs — the run count is what sets end pieces and feed points.

✅ What is published
Specification Value
Section 6.5 × 11 mm — ⭐ matches the 6.5 × 11 flex
Form / length Rigid, 3 m — ⭐ customisable
Mounting ⭐ Recessed OR surface — one part
Supplied with Mounting clips
Finish Polished aluminium — ⭐ powder coat on request
Houses PLEO neon flex and compatible LED strip
Order code LP-0611-RG-3M
⛔ Compatible flex named ⛔ Not on this listing, nor on any flex listing
⛔ Max strip width · diffuser · IP · warranty ⛔ Not published
⛔ Flex / strip / driver ⛔ Not included
⛔ Made to order, cut to length

No lead time is published. Call our team to confirm. ⭐ We will.

Where it works
  • ⭐ Long straight runs on imperfect joinery — ⭐ it corrects the line.
  • ⭐ Reveals and recesses — ⭐ a crisp shadow line.
  • Low-level runs — ⭐ physical protection.
  • ⛔ Not for a curve — ⭐ take the bendable version.
  • ⚠ Not needed at all if the flex is simply clipped to a straight, protected surface.
Specifying it

Rigid aluminium profile, 6.5 × 11 mm, 3 m. Recessed or surface mounted. Supplied with mounting clips. Polished aluminium, powder coat on request. Houses PLEO neon flex and compatible LED strip. Order code LP-0611-RG-3M. ⭐ THE PROFILE SECTIONS AND THE FLEX SECTIONS SHARE NAMES, AND NOTHING PUBLISHED STATES WHICH PAIRS WITH WHICH — no profile names a compatible flex, and no flex names a compatible profile. ⭐ The 6.5 × 11 profile is made for the 6.5 × 11 flex, and the match has to be made by reading the two numbers. ⭐ AND A PROFILE IS OPTIONAL HERE: PLEO flex is IP67, self-supporting and comes with its own clips, so the profile buys a straight line, a crisp edge and protection — not diffusion.

Supplied and supported by Lights For You.

Questions
Which flex does this profile take?

The 6.5 x 11mm PLEO flex — the sections share names, and that is the clue. Two flex listings in the range carry a section in their own titles: a 6.5 x 11mm side view and a 10 x 10mm top view. So this profile is made for the 6.5 x 11 flex.

Does anything say so explicitly?

No, and that is the gap. No profile listing names a compatible flex, and no flex listing names a compatible profile — the match has to be made by reading the two numbers. That is workable but fragile: a 6.5mm-wide flex in a 10mm channel rattles and sits crooked, and a 10mm flex will not enter a 6.5mm one at all. Tell us the flex and we will confirm the profile.

Do I even need a profile?

Often not, and it is worth knowing. PLEO flex is IP67 in a polyurethane enclosure and comes with its own mounting clips — it is a complete, weatherproof, self-supporting product, unlike a bare LED strip which needs a channel to survive. So the profile is optional here.

What does the profile actually buy me?

Four things. A straight line, because flex follows whatever it is clipped to while a rigid profile corrects the substrate — the main reason on a long run over imperfect joinery. A finished edge, since an aluminium channel gives a crisp shadow line in a reveal where bare flex gives a soft one. Physical protection at low level. And a recess detail, since the Pleo profile does recessed or surface from one part.

What does it not buy me?

Diffusion. The flex is already a diffused line, which is the opposite of the bare-strip case where the profile's depth is doing the optical work. If you are running flex, choosing a deeper profile gains you nothing optically.

When is the 3m rigid stick the right format?

For one long straight run — fewer joints than metreage, and a straightedge that corrects a bowed substrate. For a curve, the bendable version of the same section is the answer. For several short runs, the per-metre listing quotes the job better.

What do you need from me to quote it?

The run lengths and the number of separate runs. The run count is what sets the end pieces and the feed points, and metreage alone does not carry it. Tell us the flex you are using as well, and we will confirm the section matches.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKULP-0611-RG-3M — 21926 Aluminium
⭐ PROFILE AND FLEX SECTIONS SHARE NAMES⭐ 4×8 · 6.5×11 · 10×10 — ⭐ the naming is the clue
⛔ But nothing states the pairingNo profile names a flex · ⛔ no flex names a profile
⚠ A 6.5 mm flex in a 10 mm channelRattles and sits crooked
⛔ A 10 mm flex in a 6.5 mm channelWill not enter at all
⭐⭐ AND A PROFILE IS OPTIONAL HERE⭐ PLEO flex is IP67, self-supporting, with its own clips
⭐ What the profile BUYSA straight line · ⭐ a crisp shadow edge · protection · a recess detail
⭐ The straight line is the main reason⭐ Flex follows the substrate — ⭐ a rigid profile CORRECTS it
⚠ What it does NOT buyDIFFUSION — ⭐ the flex is already a diffused line
⭐ Which is the opposite of bare strip⚠ Where the profile depth does the optical work
⭐ Rigid 3 m suitsONE long straight run — ⚠ a curve wants the bendable version
⭐ Tell usRun lengths · the RUN COUNT · ⭐ and the flex you are using

Variant specifications

Profile section⭐ TakesNamed anywhere?
4 × 8mmA narrow flex or strip⛔ No
⭐ 6.5 × 11mm (this)⭐ The 6.5 × 11 flex⛔ No — ⭐ inferred from the name
10 × 10mm⭐ The 10 × 10 flex⛔ No
Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
$52.95
$52.95
Vendor
Example product title
$52.95
$52.95
Vendor
Example product title
$52.95
$52.95
Vendor
Example product title
$52.95
$52.95
Vendor
Example product title
$52.95
$52.95
Vendor
Example product title
$52.95
$52.95
Vendor
Example product title
$52.95
$52.95
Vendor
Example product title
$52.95
$52.95
Vendor
Example product title
$52.95
$52.95
Vendor
Example product title
$52.95
$52.95