Domus Lighting LED Linear Pendants Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Lighting LED Linear Pendants Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Domus Maxi 50 1.7m Long Pendant White Dimmable 4k
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 30573

Domus Maxi 50 1.7m Long Pendant White Dimmable 4k

Beam angle for focused or wide lighting
120° Beam angle for focused or wide lighting
Dimmable
Dimmable
$576.00
$576.00
Product Description  
Product Description
x

The Domus Maxi 50 is a 1.7 m suspended LED linear pendant — 34 W, 3400 lm, 4000 K at CRI90, dimmable, in a white body, in six finishes.

⛔ Made to order, and no lead time is published

Domus asks you to call and confirm it — ⚠ and on a retrofit the old fitting comes down before the new one arrives. ⭐ Settle it first.

⭐ Replacing a 5 ft twin fluorescent batten — the comparison in full
Twin 58 W fluorescent batten This fitting
Input power ≈130 W with gear ⭐ 34 W
Efficacy ≈77 lm/W at the lamp ⭐ 100 lm/W
Colour rendering Typically CRI80–85 ⭐ CRI90
Where the light goes ⚠ Sideways and upward as well as down ⭐ All downward at 120°
Maintenance Tubes replaced periodically ⚠ No lamp — the fitting is replaced
  • ⚠ The raw lumen comparison looks unfavourable and is misleading. ⭐ A bare fluorescent lamp's output is measured AT THE LAMP, ⭐ and an open batten throws a large share of it sideways and upward where it does little work — ⭐ while this fitting's 3400 lm is directed downward.
  • ⭐ So compare the working plane, not the datasheet. ⚠ We would still not claim a one-for-one swap without checking your space — ⭐ tell us the mounting height and the existing fitting and we will work it through.
  • ⭐ What is unambiguous: the power drops from about 130 W to 34 W, ⭐ the colour rendering improves from CRI80–85 to CRI90, ⭐ and the flicker and warm-up of a fluorescent tube go away.
⚠ Three practical differences to plan for
  • ⭐ It is SUSPENDED, not surface-mounted — ⭐ 3 m of drop is supplied and shortened on site, ⚠ but it will hang below the ceiling where a batten sat against it.
  • ⭐ The fixing is different — ⚠ suspension points into structure rather than screws into the lining, ⛔ and the spacing and weight are not published.
  • ⭐ No lamp. ⚠ Tell whoever maintains the building — ⭐ the 3-year replacement warranty is the right cover, and the rated lifespan is not published.
✅ The published specification
Specification Value
Light output ⭐ 3400 lm — 100 lm/W
Colour rendering ⭐ CRI90 at 4000 K
Power / length 34 W at 240 V · 1700 mm
Beam 120°, down only
IP rating IP20 — ⚠ many batten positions are damp or dusty; check
Suspension 3 m drop supplied
Dimming ⭐ DALI and emergency on request
Warranty ⭐ 3 years, replacement
⛔ Lifespan · spacing · weight ⛔ Not published
⭐ Why 4000 K for a retrofit

⭐ It is close to what a standard fluorescent tube delivered, ⭐ so the room does not change character. ⚠ 3000 K in a space people are used to seeing under cool white reads as dim even when it is not — ⭐ the eye judges brightness partly by colour temperature. ⭐ It is also the more efficient option: 3400 lm against 3060 lm.

Where it works
  • Replacing 5 ft twin fluorescent battens in offices and workrooms.
  • Two-person benches and workstations.
  • White plasterboard and grid ceilings.
  • ⚠ Not where headroom is tight — ⭐ it hangs below the ceiling.
  • ⛔ Not in a damp or dusty batten position — ⚠ IP20.
Specifying it

1.7 m suspended LED linear pendant. 3400 lm, 34 W (100 lm/W), 4000 K, CRI90. IP20. 1700 mm. 3 m drop. PLEX-COB-20W strip, integral dimmable driver, DALI and emergency on request. White powder-coated aluminium body. Six finishes. 3-year replacement warranty. Order code MAXI-50-1.7M-W-4K. ⭐ AGAINST A TWIN 58 W FLUORESCENT BATTEN: about 130 W down to 34 W, ≈77 lm/W up to 100, and CRI80–85 up to CRI90. ⚠ The raw lumen figures look unfavourable and are misleading — a bare lamp is measured AT THE LAMP, and an open batten throws much of that sideways and upward, where this fitting directs all 3400 lm downward. ⭐ Compare the working plane, not the datasheet.

Supplied and supported by Lights For You.

Questions
Can this replace a fluorescent batten?

It is a sensible replacement for a 5ft twin, and the comparison can now be made properly. Input power drops from about 130W with gear to 34W. Efficacy rises from roughly 77 lumens per watt at the lamp to 100. Colour rendering improves from a typical CRI80 to 85 up to CRI90. And the flicker and warm-up of a fluorescent tube go away.

But the batten produces more lumens — is this a downgrade?

The raw comparison is misleading. A bare fluorescent lamp's output is measured at the lamp, and an open batten throws a large share of it sideways and upward where it does little work. This fitting's 3400 lumens is directed downward at 120 degrees, so far more of it reaches the working plane. Compare the working plane rather than the datasheet — though we would not claim a one-for-one swap without checking your space. Tell us the mounting height and the existing fitting.

What changes physically?

Three things. It is suspended rather than surface-mounted, so it hangs below the ceiling where a batten sat against it — 3m of drop is supplied and shortened on site. The fixing is different: suspension points into structure rather than screws into the lining, and the spacing and weight are not published. And there is no lamp, so when it fails the fitting is replaced.

Why 4000K for a retrofit?

Because it is close to what a standard fluorescent tube delivered, so the room does not change character. 3000K in a space people are used to seeing under cool white reads as dim even when it is not — the eye judges brightness partly by colour temperature. It is also the more efficient option here at 3400 lumens against 3060 for the same 34W.

What should I tell the maintenance team?

That there is no tube to change. The old batten had lamps replaced periodically; this has none, so a failure means a new fitting. The 3-year replacement warranty is the right form of cover for that, and the rated lifespan is not published — worth asking us for if you are building a maintenance schedule around it.

Will the colour rendering improvement be noticeable?

Yes, and it is one of the clearer wins. CRI90 against a typical fluorescent CRI80 to 85 means materials, print and finishes read more accurately — reds in particular, which is where lower-CRI sources fall down most visibly. In a workroom or anywhere anything is inspected, that is a real improvement rather than a specification detail.

Can I use it in a damp space?

No — IP20, dry interior only, and many batten positions are damp or dusty. That is worth checking before a like-for-like swap rather than after. For those positions, ask us about the Domus IMPACT range at IP66 and IK10.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsMaxi 50 1.7m White 4000K — 30573 Prismatic, 30574 Frosted, 30575 Honeycomb, 30576 Opal, 30577 Black, 30578 Clear
Order codeMAXI-50-1.7M-W-4K
⭐ Input power≈130W (twin 58W + gear) → ⭐ 34W
⭐ Efficacy≈77 lm/W at the lamp → ⭐ 100 lm/W
⭐ Colour renderingTypically CRI80–85 → ⭐ CRI90
⚠ Raw lumens LOOK unfavourable⭐ And that comparison is MISLEADING
⭐ WhyA bare lamp is measured AT THE LAMP — ⚠ an open batten throws much of it sideways and up
⭐ This fittingDirects all 3400lm DOWNWARD at 120°
⭐ So compareThe working plane, not the datasheet
⚠ Difference 1SUSPENDED, not surface-mounted — ⭐ 3m drop, shortened on site
⚠ Difference 2Suspension points into structure — ⛔ spacing and weight unpublished
⚠ Difference 3No lamp — ⭐ 3-year replacement warranty; ⛔ lifespan unpublished
⚠ IP20⚠ Many batten positions are damp or dusty — ⭐ check first

Variant specifications

Twin 58W battenThis fitting
Input power≈130W⭐ 34W
Efficacy≈77 lm/W⭐ 100 lm/W
CRI80–85⭐ 90
⭐ Where the light goes⚠ Sideways and up too⭐ All downward
Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00