Domus Lighting LED Linear Pendants Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Lighting LED Linear Pendants Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 30566

Domus Maxi 50 1.7m Long Pendant Black Dimmable 4k

Beam angle for focused or wide lighting
120° Beam angle for focused or wide lighting
Dimmable
Dimmable
$576.00
$576.00
Product Description  
Product Description
x

The Domus Maxi 50 is a 1.7 m suspended LED linear pendant — 34 W, 3400 lm, 4000 K at CRI90, dimmable, in a black body, in six finishes.

⛔ Made to order, and no lead time is published

Domus asks you to call and confirm it. ⭐ We will.

⭐ Should you mix finishes across one project?
  • ✅ MIX BY ROOM. ⭐ Honeycomb over the workstations, opal over the meeting table, frosted in the corridor — ⭐ same body, same colour temperature, same visual language, each optic doing what that room needs. ⭐ That is the range working as intended, and it is the main advantage of six finishes over four.
  • ⛔ DO NOT MIX WITHIN A SIGHTLINE. ⚠ Two pendants visible at once with different finishes will not match in brightness or appearance, ⭐ and side by side that reads as a fault rather than a decision.
  • ⚠ And here the risk is higher than usual. ⛔ Domus publishes one output figure per listing, not one per finish — ⭐ so you cannot compensate for a mismatch by adjusting the dimming level, because you do not know its size.
  • ⭐ The safe rule: one finish per sightline. ⭐ If someone can see two fittings at once, they should match.
⭐ What carries safely across a mixed project
Keep constant Why
Body colour ⭐ The visual thread — ⚠ and powder-coat batches vary
Colour temperature ⚠ A 3000 / 4000 K mix is visible across a room
Load arithmetic ✅ Total metres × 20, whatever the finish or length
⚠ Finish ⭐ Vary by ROOM, never within a sightline
  • ✅ The load rule is the useful part. ⭐ Every finish and every length draws 20.0 W per metre, ⭐ so a mixed-finish, mixed-length project still calculates in one line.
  • ⭐ And the same holds across the Maxi 40 — ⭐ so a project using both ranges still calculates the same way.
  • ⚠ Order the whole project together — ⭐ made to order with no lead time, and a powder-coat batch is not guaranteed to match a later one.
✅ The published specification
Specification Value
Light output ⭐ 3400 lm — 100 lm/W
Colour rendering ⭐ CRI90 at 4000 K
Power / length 34 W at 240 V · 1700 mm
Beam 120°, down only
IP rating IP20 — ⚠ dry interior only
Suspension 3 m drop supplied
Dimming ⭐ DALI and emergency on request
Warranty ⭐ 3 years, replacement
⛔ Per-finish output · lifespan ⛔ Not published — ⭐ which is what makes mixing risky
Where it works
  • Two-person benches and workstations at 4000 K.
  • Exposed-services and dark ceilings.
  • ✅ Multi-room fitouts — ⭐ vary the finish by room.
  • ⛔ Not two finishes in one sightline.
  • ⚠ Not ordered in stages — ⭐ powder-coat batches vary.
Specifying it

1.7 m suspended LED linear pendant. 3400 lm, 34 W (100 lm/W), 4000 K, CRI90. IP20. 1700 mm. 3 m drop. PLEX-COB-20W strip, integral dimmable driver, DALI and emergency on request. Black powder-coated aluminium body. Six finishes. 3-year replacement warranty. Order code MAXI-50-1.7M-B-4K. ⭐ MIX FINISHES BY ROOM, NEVER WITHIN A SIGHTLINE — honeycomb over workstations, opal over the meeting table, frosted in the corridor is the range working as intended. ⛔ Two finishes visible at once will not match in brightness or appearance, and side by side that reads as a fault. ⚠ The risk is higher here because Domus publishes one output figure per listing, not one per finish — ⭐ so a mismatch cannot be dimmed back into line. ✅ The load rule survives any mix: total metres × 20.

Supplied and supported by Lights For You.

Questions
Can I use different finishes across one project?

Yes, by room. Honeycomb over the workstations, opal over the meeting table, frosted in the corridor — same body, same colour temperature, same visual language, each optic doing what that room needs. That is the range working as intended, and it is the main advantage of six finishes over four.

Why not mix within a sightline?

Two pendants visible at once with different finishes will not match in brightness or appearance, and side by side that reads as a fault rather than a decision. The risk is higher here than usual because Domus publishes one output figure per listing rather than one per finish — so you cannot compensate for a mismatch by adjusting the dimming level, since you do not know its size. The safe rule is one finish per sightline.

What should stay constant across a mixed project?

Body colour, because it is the visual thread and because powder-coat batches vary. Colour temperature, because a 3000K and 4000K mix is visible across a room and reads as a mistake. And order the whole project together — these are made to order with no published lead time, and a later batch is not guaranteed to match. The finish is the thing to vary, and only by room.

Does mixing complicate the load calculation?

No, and that is the useful part. Every finish and every length draws exactly 20.0 watts per metre, so a mixed-finish, mixed-length project calculates in one line: total metres × 20. The same holds across the Maxi 40, so a project using both ranges still calculates the same way.

Which finish over screens?

The honeycomb — a cellular baffle that blocks light above a cut-off angle, removing the high-angle component that reflects in a monitor. Prismatic is the efficient alternative: it redirects that light downward rather than absorbing it, so you keep the output. Frosted and opal scatter it but still emit it.

Why black plus 4000K?

It is the exposed-services combination: a black body joins bare or dark structure instead of fighting it, where a white pendant would be the loudest object in the room, and 4000K keeps it a working position rather than a bar. It is also the more efficient of the two at 3400 lumens against 3060 for the same 34W.

What is not published?

The per-finish output, the rated lifespan, the suspension-point spacing and the weight. The per-finish output is the one that bears on this page directly — it is exactly what makes mixing finishes risky. Ask us and we will get the set from Domus.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsMaxi 50 1.7m Black 4000K — 30566 Prismatic, 30567 Frosted, 30568 Honeycomb, 30569 Opal, 30570 Black, 30571 Clear
Order codeMAXI-50-1.7M-B-4K
✅ MIX finishes by ROOMHoneycomb over workstations · opal over the meeting table · frosted in the corridor
⛔ NEVER within a sightlineTwo finishes seen at once will not match in brightness OR appearance
⭐ The safe ruleOne finish per sightline
⚠ Why the risk is higher here⛔ ONE output figure per LISTING, not per finish
⭐ SoA mismatch cannot be dimmed back into line — ⭐ you do not know its size
⭐ Keep constantBody colour · colour temperature — ⚠ and order the project together
✅ Survives any mixThe load rule — ⭐ total metres × 20, across BOTH ranges
✅ Light output3400lm — ⭐ 100 lm/W
✅ CRI⭐ CRI90 at 4000K
⚠ IP ratingIP20 — dry interior only

Variant specifications

ScenarioMix finishes?Why
⭐ Different rooms✅ YesEach optic does its room's job
⛔ One row of pendants⛔ NoBrightness and appearance differ
⛔ One open-plan sightline⛔ No⚠ Reads as a fault
✅ Mixed lengths, one finish✅ Yes⭐ Load still metres × 20
Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00
Vendor
Example product title
$576.00
$576.00