Domus Lighting LED Linear Pendants Domus Maxi 40 2.4m Long Pendant White Dimmable 3k High Diffuser
Domus Maxi 40 2.4m Long Pendant White Dimmable 3k High Diffuser
Domus Maxi 40 2.4m Long Pendant White Dimmable 3k High Diffuser
Domus Maxi 40 2.4m Long Pendant White Dimmable 3k High Diffuser
Domus Lighting LED Linear Pendants Domus Maxi 40 2.4m Long Pendant White Dimmable 3k High Diffuser
Domus Maxi 40 2.4m Long Pendant White Dimmable 3k High Diffuser
Domus Maxi 40 2.4m Long Pendant White Dimmable 3k High Diffuser
Domus Maxi 40 2.4m Long Pendant White Dimmable 3k High Diffuser
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 30350

Domus Maxi 40 2.4m Long Pendant White Dimmable 3k High Diffuser

Beam angle for focused or wide lighting
120° Beam angle for focused or wide lighting
Dimmable
Dimmable
$693.00
$693.00
Product Description  
Product Description
x

The Domus Maxi 40 is a 2.4 m suspended LED linear pendant — 48 W, 4320 lm, 3000 K at CRI90, dimmable, in a white body with a high diffuser.

⛔ Made to order, and no lead time is published

Domus asks you to call and confirm it. ⭐ We will.

⭐ Setting out a row — the gap, the alignment and the batch
  • ⭐ THE GAP. ⭐ A gap of about half a fitting length or more reads as a deliberate rhythm; ⚠ a small gap reads as a continuous run that failed to join — ⭐ which is the uncomfortable case, because it looks like a mistake rather than a choice.
  • ⭐ And there is a lighting constraint as well as a visual one. ⭐ The 120° beam spreads to roughly 3.5 times the mounting height, ⭐ so at 1 m above the working plane each fitting covers about 3.5 m across — ⭐ which means gaps up to about 1 m keep the level even between 2.4 m fittings. ⚠ Wider than that and you will see a scallop between them.
  • ⭐ THE ALIGNMENT. ⚠ Two suspension points per fitting means four fixings per pair, ⭐ and any error is visible down the whole room because the fittings are long and parallel. ⛔ The spacing is not published — ⭐ ask before setting out.
  • ⭐ THE BATCH. ⚠ Made to order and powder-coated, so a second order is not guaranteed to match — ⭐ and on a white body side by side that shows more readily than on a dark one. ⭐ Order the run together.
⭐ A row, in numbers
Fittings Load Output
3 144 W 12,960 lm
5 240 W ⭐ 21,600 lm
8 384 W 34,560 lm

⭐ Both columns calculate directly — ⭐ load from 20.0 W/m and output from the published 4320 lm. ⚠ Turning lumens into lux still needs the room; ⭐ tell us and we will do it.

⭐ And add a spare

⭐ On a run of eight or more, order one extra from the same batch. ⚠ This is an integrated LED with no lamp, ⛔ the rated lifespan is not published, and ⚠ a replacement is made to order on an unknown clock. ⭐ A spare removes all three at once.

✅ The published specification
Specification Value
Light output 4320 lm — 90 lm/W
Colour rendering ⭐ CRI90 at 3000 K
Power / length 48 W at 240 V · 2400 mm
Beam ⭐ 120°, down only — ⭐ spreads to ≈3.5× the mounting height
IP rating IP20 — ⚠ dry interior only
Suspension 3 m drop — ⚠ two points
Dimming ⭐ DALI and emergency on request
Warranty ⭐ 3 years, replacement
⛔ Lifespan · spacing · weight ⛔ Not published
Where it works
  • Rows over benching and long counters.
  • Corridors of tables in hospitality and education.
  • White and plasterboard ceilings.
  • ✅ Runs ordered in one go — ⭐ one batch, one finish.
  • ⛔ Not set out until we have the suspension spacing.
Specifying it

2.4 m suspended LED linear pendant. 4320 lm, 48 W (90 lm/W), 3000 K, CRI90. 120° down-only. IP20. 2400 mm. 3 m drop. PLEX-COB-20W strip, integral dimmable driver, DALI and emergency on request. White body, high diffuser. 3-year replacement warranty. Order code MAXI-40-2.4M-HD-W-3K. SKUs 30350–30353. 240 V. ⭐ THE GAP IS NOW A CALCULATION, NOT A GUESS — the 120° beam spreads to roughly 3.5× the mounting height, so at 1 m above the working plane each fitting covers about 3.5 m and gaps up to about 1 m keep the level even. ⚠ Wider and you will see a scallop. ⭐ Visually, half a fitting length or more reads as rhythm; a small gap reads as a failed run.

Supplied and supported by Lights For You.

Questions
How far apart should a row of these be?

There are two constraints and they mostly agree. Visually, a gap of about half a fitting length or more reads as a deliberate rhythm, while a small gap reads as a continuous run that failed to join — which looks like a mistake rather than a choice. On the lighting side, the 120 degree beam spreads to roughly 3.5 times the mounting height, so at 1m above the working plane each fitting covers about 3.5m across, and gaps up to about 1m keep the level even between 2.4m fittings. Wider than that and you will see a scallop.

What else makes a row look wrong?

Alignment and batch. Two suspension points per fitting means four fixings per pair, and any error is visible down the whole room because the fittings are long and parallel — and the point spacing is not published, so ask before setting out. And these are made to order and powder-coated, so a second order is not guaranteed to match the first, which on a white body side by side shows more readily than on a dark one.

What load and output will a row give?

Both calculate directly: load from 20.0 watts per metre and output from the published 4320 lumens. Three fittings is 144W and 12,960 lumens, five is 240W and 21,600 lumens, eight is 384W and 34,560 lumens. Turning lumens into lux still needs the room's surfaces and geometry — tell us and we will do it.

Should I order a spare?

On a run of eight or more, yes. This is an integrated LED with no lamp, the rated lifespan is not published, and a replacement is made to order on an unknown clock. One extra fitting from the same batch removes all three problems at once, and on a white powder coat it also guarantees the finish matches.

Should I order the run in stages?

No. A later order starts its own unknown lead-time clock and a powder-coat batch is not guaranteed to match — which on a row of white fittings seen side by side is exactly where it shows. Order one finish, one colour temperature, one batch.

How much light does each give?

4320 lumens at 1800 lumens per metre, or 90 lumens per watt from 48W, at 3000K and CRI90. The 4000K version gives 4800 lumens for the same power, about 11% more, if the space suits neutral light.

Can I use it in a damp space?

No — IP20, dry interior only. For bathrooms, covered outdoor areas, commercial kitchens or unsealed bays, ask us about the Domus IMPACT range at IP66 and IK10.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsMaxi 40 2.4m White 3000K High Diffuser — 30350 Prismatic, 30351 Frosted, 30352 Black, 30353 Clear
Order codeMAXI-40-2.4M-HD-W-3K
⭐ THE GAP — visuallyHalf a fitting length or more = rhythm — ⚠ a SMALL gap reads as a failed run
⭐ THE GAP — optically120° spreads to ≈3.5× the mounting height
⭐ So at 1m above the planeEach covers ≈3.5m — ⭐ gaps up to ≈1m keep the level even
⚠ Wider than thatYou will see a scallop between fittings
⭐ THE ALIGNMENTFour fixings per pair — ⚠ any error is visible down the whole room
⛔ Point spacingNOT PUBLISHED — ⭐ ask before setting out
⭐ THE BATCHOrder the run together — ⚠ white powder coat shows a batch difference readily
⭐ A row of five240W · ⭐ 21,600lm
⭐ Add a spare on eight or more⚠ Integrated LED, no lifespan published, made-to-order replacement
✅ CRI / warranty⭐ CRI90 · 3 years replacement

Variant specifications

Gap between 2.4m fittingsLooks likeLight level
⚠ Much smaller than the fittingA failed continuous runEven
⭐ ≈half the length, up to ≈1m⭐ A deliberate rhythm⭐ Even
⚠ Wider than ≈1m at 1m mountingSpaced pendants⚠ Scallops
Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
$693.00
$693.00
Vendor
Example product title
$693.00
$693.00
Vendor
Example product title
$693.00
$693.00
Vendor
Example product title
$693.00
$693.00
Vendor
Example product title
$693.00
$693.00
Vendor
Example product title
$693.00
$693.00
Vendor
Example product title
$693.00
$693.00
Vendor
Example product title
$693.00
$693.00
Vendor
Example product title
$693.00
$693.00
Vendor
Example product title
$693.00
$693.00