Domus Lighting Aluminium Profile Domus MAX-75 Surface Mounted Profile
Domus Lighting Aluminium Profile Domus MAX-75 Surface Mounted Profile Lights-For-You 22364 9330772223644
Domus Lighting Aluminium Profile Domus MAX-75 Surface Mounted Profile Lights-For-You 22368 9330772223682
Domus Lighting Aluminium Profile Domus MAX-75 Surface Mounted Profile
Domus Lighting Aluminium Profile Domus MAX-75 Surface Mounted Profile Lights-For-You 22364 9330772223644
Domus Lighting Aluminium Profile Domus MAX-75 Surface Mounted Profile Lights-For-You 22368 9330772223682
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 22360

Domus MAX-75 Surface Mounted Profile

3 Years Warranty
3 Years Warranty
IP20 – perfect for indoor use
IP20 – perfect for indoor use
Beam angle for focused or wide lighting
120° Beam angle for focused or wide lighting
Color: Aluminum
$295.47
$478.58
$295.47
Product Description  
Product Description
x

The Domus MAX-75 Surface Mounted is an aluminium profile luminaire fixed to the ceiling, sold by the metre — 17.3 W per metre from a 75 mm-wide aperture, with 3000 K, 4000 K or tunable white and DALI and 0–10 V options. 3-year warranty.

⛔ This item is made to order

Up to 10 business days for production before it ships.

⭐ Here the depth disagreement does not stop the job — but it changes the look
  • ⛔ Its datasheet says the profile is 75 × 75 mm; its record says 95 mm high. ⭐ Both MAX-75 pendant listings agree at 95 mm.
  • ✅ On a SURFACE fitting that is a visual question rather than a fit one — ⭐ nothing has to be cut, and nothing will fail to go in. ⚠ On the recessed sibling the same 20 mm can stop a job.
  • ⚠ But 75 or 95 mm is a real difference in how it reads. ⭐ Picture it: a 95 mm-deep line hanging below a 2.4 m ceiling is close to a hand's width of aluminium in view. That is an architectural element, not a discreet one.
  • ⭐ If the visual weight matters — a low ceiling, a small room, a run at the edge of a sight line — ask us to confirm the section before you commit. ⭐ If it does not, order with confidence.
⭐ The MAX-75 is the low-glare choice, not the brighter one
MAX-50 Surface MAX-75 Surface
Power and output 17.3 W/m · 2,466 lm/m Identical
Aperture 50 mm ⭐ 75 mm
Surface brightness Higher ⭐ About a third lower
  • ⭐ The same light over 50% more emitting area. ⛔ Nothing in the catalogue says so, and the wider profile is easily assumed to be the brighter one.
  • ⭐ Surface mounted, this is most useful under low ceilings — ⭐ a surface fitting is closer to the eye than a recessed one by its whole depth, so luminance matters more, not less.
  • ⚠ And it is the wider, deeper object of the two. ⭐ Lower glare, more presence — that is the trade.
⭐ It fixes where a recessed profile cannot go at all
  • ⭐ Concrete soffits, shallow voids, direct-fixed linings, finished ceilings. Anywhere the 95 mm of depth simply is not available above the line.
  • ⭐ And retrofits — a surface run goes into a completed building without opening anything.
  • ⭐ It is also the easier one to live with. ⚠ Retro-fitting DALI means replacing the luminaire, ⭐ and a surface profile comes down without a plasterer.
⛔ It records "not dimmable" — and sells DALI, 0-10 V and tunable white

⛔ 21 variants including DALI, 0–10 V and TUNABLE/DALI, on a listing recording dimmable = No. ⭐ The base product is non-dimmable and control is a variant choice; ⚠ a single yes/no field cannot say that, ⛔ so filtering on dimmable hides all 9 MAX profile listings. ⭐ TUNABLE/DALI shifts colour temperature from the controller — ⚠ DALI only, and in no product field.

Specifying it
  • 2,466 lm/m at 3000 K, 2,600 lm/m at 4000 K. ⭐ About 150 lm/W — high, where most of this catalogue sits between 60 and 100.
  • Extruded 6063 aluminium, clear anodised, black or white. Flat high-output opal-frost PMMA diffuser. Osram LED boards — ⭐ which matter more on a wide aperture, where board-to-board colour variation has more diffuser to show on.
  • CRI ≥80. 120°. 50,000 hrs. IP20.
  • ⚠ Its power field records 17.3 W ✅ — matching the sheet, unlike the MAX-50 recessed listing's 21 W.
  • ⭐ On request: high-output LED boards and integrated emergency. ⛔ Neither is a variant.
Where it works
  • ⭐ Concrete soffits and shallow voids — where recessing is impossible.
  • Retrofits into finished ceilings.
  • Low-ceiling offices and corridors — ⭐ where the wide low-glare aperture earns its place.
  • ⚠ Not where visual weight matters and the section is unconfirmed — ⭐ ask us.
  • ⚠ Not where a flush architectural line is the point — use the recessed version.
Specifying it

Surface-mounted LED profile luminaire, sold per metre. 17.3 W/m. 2,466 lm/m (3000 K), 2,600 lm/m (4000 K). 3000 K, 4000 K or tunable white. Plain, DALI or 0–10 V. CRI ≥80. 120°. IP20. Profile 75 mm wide. Extruded 6063 aluminium. Flat opal-frost PMMA diffuser. Osram LED boards. 50,000 hrs. ✅ 3-year warranty. ⛔ Made to order — allow up to 10 business days. ⛔ Its sheet says 75 × 75mm and its record says 95mm high — ⭐ on a SURFACE fitting that is a visual question, not a fit one, but a 95mm line below a ceiling is a hand's width of aluminium in view. Ask us if visual weight matters. ⭐ Same output as the MAX-50 from a 50% wider aperture: the low-glare choice.

Supplied and supported by Lights For You.

Questions
Does the 75mm/95mm disagreement matter here?

Not for fit — on a surface fitting nothing has to be cut and nothing will fail to go in, which is very different from the recessed sibling where the same 20mm can stop a job. But it does change how it reads. Picture it: a 95mm-deep line hanging below a 2.4m ceiling is close to a hand's width of aluminium in view, which is an architectural element rather than a discreet one. If visual weight matters — a low ceiling, a small room, a run at the edge of a sight line — ask us to confirm the section before committing. If it does not, order with confidence.

Is the MAX-75 brighter than the MAX-50?

No — same 17.3W per metre and same 2,466 lumens per metre. The difference is the aperture: 75mm against 50mm, so the same light spreads over 50% more emitting area and the surface brightness is about a third lower. Nothing in the catalogue says so, and the wider profile is easily assumed to be the brighter one. Surface mounted this matters more rather than less, because a surface fitting is closer to the eye than a recessed one by its whole depth.

When should I choose surface over recessed?

Whenever the depth is not available above the ceiling line — concrete soffits, shallow voids, direct-fixed linings, finished ceilings. It is also the retrofit answer, going into a completed building without opening anything. And it is easier to live with: retro-fitting DALI means replacing the luminaire either way, but a surface profile comes down without a plasterer.

Can I dim it?

On the DALI or 0–10V variants, yes. The listing records dimmable as No because a single yes/no field cannot express a variant axis — nine MAX profile listings are in the same position, so filtering a catalogue on dimmable hides all of them. TUNABLE/DALI also exists, shifting colour temperature from the control system, and it appears in no product field at all. Choose the control before the finish.

What power should I use?

17.3W per metre — and this listing records it correctly, matching its datasheet. Worth noting because the MAX-50 recessed listing records 21W, which disagrees with its own sheet and with every sibling in the range. Over a 10-metre run 17.3W per metre is 173W, and that is the figure to size a circuit or driver on.

Why do the Osram boards matter more on this one?

Because a wider aperture gives board-to-board colour variation more diffuser to show on. Banding along a linear run is the commonest visible fault in this kind of lighting, and a 75mm-wide opal face displays it more readily than a 50mm one. A specified light engine makes that less likely, and makes a replacement board years later more likely to match.

Can I get emergency in the run?

Not as a variant, but the datasheet lists integrated emergency and high-output LED boards as available on request. Raise it at quotation stage — on a continuous surface line, adding a separate emergency fitting later breaks the line visually, which rather defeats the point of specifying a continuous profile.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsMAX-75 Surface Mounted Profile — 21 variants: Aluminium / Black / White × 3000K, 4000K, DALI, 0-10V, TUNABLE-DALI
TypeSurface-mounted LED profile luminaire, sold per metre
⛔ Made to orderDomus builds this to order — allow up to 10 business days for production before dispatch
⛔ Profile depthSheet says 75 × 75mm; record says 95mm — ✅ on a SURFACE fitting that is visual, not a fit question
⚠ But picture itA 95mm-deep line below a 2.4m ceiling is a hand's width of aluminium in view
⭐ Aperture75mm — ⭐ same output as the MAX-50 from 50% more area, so about a third less surface brightness
⭐ Why that matters hereA surface fitting is closer to the eye than a recessed one by its whole depth
✅ Power recorded17.3W/m — ⭐ matching its datasheet, unlike the MAX-50 recessed listing's 21W
Output2,466lm/m (3000K) · 2,600lm/m (4000K) — ⭐ ≈150 lm/W
⛔ Dimming recordedNo — ⚠ while selling DALI, 0-10V and TUNABLE/DALI variants
⭐ Where recessing failsConcrete soffits, shallow voids, direct-fixed linings, finished ceilings
⭐ Easier to live withRetro-fitting control means replacing the luminaire — ⭐ but a surface profile comes down without a plasterer
⭐ Light engineOsram LED boards — ⭐ banding shows more on a wide aperture
CRI / beam≥80 · 120°
IP rating / warrantyIP20, indoor and dry only · ✅ 3 Years

Variant specifications

The 75 vs 95mm conflictRecessed MAX-75Surface MAX-75 — this one
What it decides⛔ Whether it FITS the void⭐ How it LOOKS below the ceiling
Can it stop the job?⛔ Yes✅ No
⭐ What to doConfirm before committingConfirm if visual weight matters
Data Sheet & Manual  
Data Sheet & Manual
x

This browser does not support PDFs. Please download the PDF to view it: Download PDF.

Download Datasheet (PDF)

Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More
Compare color
  • aluminum
  • black
  • white
Click on color/pattern to compare, click and drag images to reorder

Recently Viewed

Customers Also Bought

Vendor
Example product title
From $295.47
$478.58
From $295.47
Vendor
Example product title
From $295.47
$478.58
From $295.47
Vendor
Example product title
From $295.47
$478.58
From $295.47
Vendor
Example product title
From $295.47
$478.58
From $295.47
Vendor
Example product title
From $295.47
$478.58
From $295.47
Vendor
Example product title
From $295.47
$478.58
From $295.47
Vendor
Example product title
From $295.47
$478.58
From $295.47
Vendor
Example product title
From $295.47
$478.58
From $295.47
Vendor
Example product title
From $295.47
$478.58
From $295.47
Vendor
Example product title
From $295.47
$478.58
From $295.47