Domus Lighting Aluminium Profile Domus MAX-50 Surface Mounted Profile
Domus Lighting Aluminium Profile Domus MAX-50 Surface Mounted Profile Lights-For-You 22316 9330772223163
Domus Lighting Aluminium Profile Domus MAX-50 Surface Mounted Profile Lights-For-You 22320 9330772223200
Domus Lighting Aluminium Profile Domus MAX-50 Surface Mounted Profile
Domus Lighting Aluminium Profile Domus MAX-50 Surface Mounted Profile Lights-For-You 22316 9330772223163
Domus Lighting Aluminium Profile Domus MAX-50 Surface Mounted Profile Lights-For-You 22320 9330772223200
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 22316

Domus MAX-50 Surface Mounted Profile

3 Years Warranty
3 Years Warranty
IP20 – perfect for indoor use
IP20 – perfect for indoor use
L4Y Best Choice
L4Y Best Choice
Very bright – large areas
2466 lm Learn More!!
Beam angle for focused or wide lighting
120° Beam angle for focused or wide lighting
Color: Black
$309.62
$500.34
$309.62
Product Description  
Product Description
x

The Domus MAX-50 Surface Mounted is an aluminium profile luminaire fixed to the ceiling, sold by the metre — 17.3 W per metre, Osram LED boards, 3000 K, 4000 K or tunable white, with DALI and 0–10 V options. 3-year warranty.

⛔ This item is made to order

Up to 10 business days for production before it ships — ⭐ which is what lets it be cut to your run.

⭐ It is the answer whenever the recessed version will not fit
  • ⭐ The recessed MAX-50 needs 75 mm of depth above the ceiling line. ⚠ Very often that depth is not there: a shallow batten void, a concrete soffit with a direct-fixed lining, a run crossing a duct or a beam.
  • ✅ This version does the same job below the ceiling. Same 17.3 W/m, same 2,466 lm/m, same 21 variants, same profile.
  • ⭐ So the choice between them is a ceiling question, not a lighting one — and it is worth checking the plenum before you specify either.
  • ⚠ What you give up is the flush line. ⭐ A surface profile reads as an applied object; a recessed one reads as part of the ceiling. ⚠ On a considered architectural ceiling that difference is the whole point; in a corridor or a plant room it is immaterial.
  • ⭐ It also fixes to a concrete soffit directly, which a recessed profile cannot do at all.
✅ It is the only MAX listing that records its own output
  • ✅ This record carries lumens = 2466lm | 2600lm. ⛔ Its eight MAX siblings leave that figure to the datasheet.
  • ⭐ Worth crediting, because output per metre is the figure a lighting calculation actually runs on — a designer working from product records rather than PDFs can use this one and cannot use the others.
  • ⚠ Its power field rounds 17.3 W to 17 W — ⭐ a trivial difference on one metre, ⚠ but 3 W over a 10-metre run.
  • ⭐ 2,466 lm/m at 3000 K and 2,600 at 4000 K works out at about 150 lm/W — ⭐ high, where most of this catalogue sits between 60 and 100.
⛔ It records "not dimmable" — and sells DALI, 0-10 V and tunable white
  • ⛔ 21 variants including DALI, 0–10 V and TUNABLE/DALI, on a listing recording dimmable = No.
  • ⭐ The base product is non-dimmable and control is a variant choice — ⚠ a single yes/no field cannot say that, ⛔ so filtering on dimmable hides all 9 MAX profile listings.
  • ⭐ On a surface run, this is at least recoverable: ⚠ retro-fitting DALI still means replacing the luminaire, ⭐ but a surface profile can be taken down without opening a ceiling — which is a genuine advantage over the recessed version.
  • ⭐ TUNABLE/DALI shifts colour temperature from the controller. ⚠ DALI only, in no product field.
Specifying it
  • Profile 50 mm wide × 75 mm high, ⚠ all of it below the ceiling. ⭐ Which is worth picturing: a 75 mm-deep line across a 2.4 m ceiling is a visible architectural element, not a discreet one.
  • Extruded 6063 aluminium, clear anodised, black or white. Flat high-output opal-frost PMMA diffuser. Osram LED boards.
  • CRI ≥80. 120°. 50,000 hrs. IP20 — indoor and dry.
  • ⭐ On request: high-output LED boards and integrated emergency. ⛔ Neither is a variant.
Where it works
  • ⭐ Anywhere the recessed version fails on ceiling depth.
  • Concrete soffits — ⭐ where recessing is not possible at all.
  • Corridors, offices and retail, in continuous surface lines.
  • Retrofits into finished ceilings.
  • ⚠ Not where a flush architectural line is the point — ⭐ use the recessed version.
Specifying it

Surface-mounted LED profile luminaire, sold per metre. 17.3 W/m. 2,466 lm/m (3000 K), 2,600 lm/m (4000 K). 3000 K, 4000 K or tunable white. Plain, DALI or 0–10 V. CRI ≥80. 120°. IP20. Profile 50 × 75 mm, extruded 6063 aluminium. Flat opal-frost PMMA diffuser. Osram LED boards. 50,000 hrs. ✅ 3-year warranty. ⛔ Made to order — allow up to 10 business days. ⭐ It is the answer whenever the recessed version fails on ceiling depth — same output, same variants, below the ceiling. ✅ The ONLY MAX listing recording its lumen output in a field. ⚠ Its power field rounds 17.3W to 17W — 3W over a 10-metre run. ⛔ Recorded as not dimmable while selling DALI, 0-10V and tunable variants.

Supplied and supported by Lights For You.

Questions
When should I choose surface over recessed?

Whenever the ceiling depth is not there — the recessed MAX-50 needs 75mm above the ceiling line, and very often it is not available: a shallow batten void, a concrete soffit with a direct-fixed lining, a run crossing a duct or beam. This version does the same job below the ceiling with the same 17.3W per metre, the same 2,466 lumens per metre and the same 21 variants. So the choice is a ceiling question, not a lighting one. It also fixes to a concrete soffit directly, which a recessed profile cannot do at all.

What do I give up by surface mounting?

The flush line. A surface profile reads as an applied object; a recessed one reads as part of the ceiling. On a considered architectural ceiling that difference is the whole point, and in a corridor or plant room it is immaterial. Worth picturing the scale: a 75mm-deep line across a 2.4m ceiling is a visible architectural element rather than a discreet one, so it wants to be deliberate — aligned with something, or running the full length.

How much light does it give?

2,466 lumens per metre at 3000K and 2,600 at 4000K, which works out at about 150 lumens per watt — high, where most fittings in this catalogue sit between 60 and 100. Worth noting that this is the only MAX listing that records its lumen output in a product field rather than leaving it to the datasheet. That is genuinely useful: output per metre is the figure a lighting calculation runs on, and a designer working from records rather than PDFs can use this one and cannot use its eight siblings.

Is it 17W or 17.3W per metre?

17.3W — the datasheet figure, and the one every other MAX-50 sheet gives. This listing's power field rounds it to 17W, which is trivial on a single metre but 3W over a 10-metre run. Use 17.3W per metre for circuit and driver calculations. Worth knowing that the recessed MAX-50 listing records 21W, which is a much larger discrepancy and disagrees with its own datasheet.

Can I dim it?

On the DALI or 0–10V variants, yes. The listing records dimmable as No because a single yes/no field cannot express a variant axis — nine MAX profile listings are in the same position, so filtering a catalogue on dimmable hides all of them. On a surface run this is at least recoverable: retro-fitting DALI still means replacing the luminaire, but a surface profile can be taken down without opening a ceiling, which is a real advantage over the recessed version.

What does TUNABLE/DALI add?

Colour temperature shifted from the control system rather than fixed at 3000K or 4000K for the life of the fitting — warm in the evening, neutral during the day. It is DALI only, so a 0–10V system cannot have it, and it appears in no product field at all. On a surface-mounted run it is easier to change your mind later than on a recessed one, but it is still a luminaire replacement rather than a module swap.

Can I get emergency in the run?

Not as a variant, but the datasheet lists integrated emergency and high-output LED boards as available on request. Raise it at quotation stage — on a continuous surface line, adding a separate emergency fitting later breaks the line visually, which rather defeats the point of specifying a continuous profile in the first place.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsMAX-50 Surface Mounted Profile — 21 variants: Aluminium / Black / White × 3000K, 4000K, DALI, 0-10V, TUNABLE-DALI
TypeSurface-mounted LED profile luminaire, sold per metre
⛔ Made to orderDomus builds this to order — allow up to 10 business days for production before dispatch
⭐ Why choose itThe answer whenever the recessed version fails on ceiling depth — ⭐ same output, same variants
⭐ AlsoFixes to a concrete soffit directly, which a recessed profile cannot do at all
✅ Lumen output2,466lm/m (3000K) · 2,600lm/m (4000K) — ⭐ THE ONLY MAX listing recording this in a field
⭐ Efficacy≈150 lm/W — high; most of this catalogue sits between 60 and 100
⚠ Power fieldRounds 17.3W to 17W — ⭐ 3W over a 10-metre run. Use 17.3W/m
⛔ Dimming recordedNo — ⚠ while selling DALI, 0-10V and TUNABLE/DALI variants
⭐ Recoverable hereRetro-fitting still means replacing the luminaire — ⭐ but a surface profile comes down without opening a ceiling
⚠ Profile50mm wide × 75mm high — ⭐ all of it BELOW the ceiling. A visible architectural element
⭐ Light engineOsram LED boards
CRI / beam≥80 · 120°
⭐ On requestHigh-output LED boards · integrated emergency — ⚠ adding emergency later breaks a continuous line
IP rating / warrantyIP20, indoor and dry only · ✅ 3 Years

Variant specifications

Recessed MAX-50Surface MAX-50 — this one
Ceiling depth needed⚠ 75mm above the line✅ None
Concrete soffit⛔ Not possible✅ Fixes directly
AppearancePart of the ceilingAn applied element
Changing control later⚠ Open the ceiling⭐ Take it down
Data Sheet & Manual  
Data Sheet & Manual
x

This browser does not support PDFs. Please download the PDF to view it: Download PDF.

Download Datasheet (PDF)

Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More
Compare color
  • aluminum
  • black
  • white
Click on color/pattern to compare, click and drag images to reorder

Recently Viewed

Customers Also Bought

Vendor
Example product title
From $253.01
$409.22
From $253.01
Vendor
Example product title
From $253.01
$409.22
From $253.01
Vendor
Example product title
From $253.01
$409.22
From $253.01
Vendor
Example product title
From $253.01
$409.22
From $253.01
Vendor
Example product title
From $253.01
$409.22
From $253.01
Vendor
Example product title
From $253.01
$409.22
From $253.01
Vendor
Example product title
From $253.01
$409.22
From $253.01
Vendor
Example product title
From $253.01
$409.22
From $253.01
Vendor
Example product title
From $253.01
$409.22
From $253.01
Vendor
Example product title
From $253.01
$409.22
From $253.01