Domus Lighting Inground Lights Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus Lighting Inground Lights Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Domus EMIT 55mm Accessories
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 10167

Domus EMIT 55mm Accessories

$1.76
$1.76
Product Description  
Product Description
x

These are the accessories for the Domus EMIT-55 inground light — lenses, a diffuser, a honeycomb louvre and the cannister. Seven options, sold individually.

⛔ The datasheet attached to this page is the fitting's, not the accessories'
  • ⛔ It carries the EMIT-55 luminaire's datasheet — complete with that fitting's 2.5 W rating, its IP67/IK10 ratings and its nine-fascia lumen table.
  • ⛔ None of that describes what is sold here. A lens has no wattage and a cannister has no lumen output.
  • ⭐ We have used it only for what it legitimately tells us — the EMIT-55's cutout figures and beam angles, which is what these accessories act on. Nothing on this page is presented as a specification of the accessories themselves.
⭐ The cannister changes the cutout — and it is sold here
  • EMIT-55 cutout: Ø43 mm without the cannister, Ø48 mm with it.
  • ⚠ Decide before you cut. A Ø43 mm hole cannot later take a cannister without being opened out, and in paving that is real work.
  • ⭐ What it does: a sealed sleeve for the fitting to sit in, keeping soil and water off the body and making the fitting removable later without digging.
  • ⚠ On the EMIT-85 the same decision costs 17 mm rather than 5 — worth knowing if you are using more than one size on a job.
⭐ The lens set is different from the EMIT-25's
EMIT-55 accessories EMIT-25 accessories
19° lens 19° lens
⛔ — 24° lens
36° lens (standard) 36° lens (standard)
60° lens 60° lens
⭐ Linear lens ⛔ —
Diffuser · Honeycomb · Cannister Diffuser · Honeycomb · Cannister
  • ⭐ The linear lens is the one worth knowing about. It stretches the circular beam into an ellipse, which is what you want on a wall, a hedge or a long low subject — a round beam on a linear surface wastes light at both ends.
  • ⚠ There is no 24° option here, where the EMIT-25 has one. So the angle steps are coarser on the larger fitting.
  • ⭐ All lenses are swappable in place, without lifting the fitting out of the ground.
⭐ Diffuser and honeycomb — opposite solutions to glare
  • Diffuser — softens the source into a glow. For fittings seen directly at close range.
  • Honeycomb louvre — ⭐ blocks the view of the source at an angle without spreading the beam. The light still lands where you aimed it; you just do not see the emitter walking past.
  • ⭐ On a 55 mm fitting with a 135 lm open fascia, the honeycomb is often the better answer — there is enough output that hiding the source costs you nothing you will notice.
  • ⚠ Neither's output cost is quantified in any source.
Where it works
  • Tuning an installed EMIT-55 run without lifting fittings.
  • Washing a wall or a hedge — the linear lens.
  • Specifying the cannister before the hole is cut.
  • Fixing glare after handover — the honeycomb.
  • ⛔ Not for the EMIT-25 or EMIT-85 — different sizes, different accessories.
Specifying it

Accessories for the Domus EMIT-55 inground light: diffuser, linear lens, 19° / 36° / 60° lenses, cannister and honeycomb louvre. Sold individually. ⛔ The datasheet attached to this listing is the EMIT-55 FITTING's, not the accessories' — its wattage, lumen table and ratings describe a different product. ⭐ The cannister changes the fitting's cutout from Ø43 mm to Ø48 mm, so it is a decision to make before the hole is cut. ⭐ The lenses change the beam angle in place. ⭐ Warranty: the datasheet gives 5 years and no product field carries it — ask us to confirm with your order.

Supplied and supported by Lights For You.

Questions
Why does the datasheet on this page describe a light fitting?

Because it is the EMIT-55 luminaire's datasheet rather than the accessories' — it carries that fitting's 2.5W rating, its IP67 and IK10 ratings and its nine-fascia lumen table, none of which describes a lens or a cannister. Our checking process flagged it as the wrong sheet for this SKU. We have used it only for what it legitimately tells us: the EMIT-55's cutout figures and beam angles, which is what these accessories act on.

What does the cannister change?

The cutout. The EMIT-55 takes Ø43mm without a cannister and Ø48mm with one, because the sleeve surrounds the fitting. That makes it a decision to take before you cut — a Ø43mm hole cannot later accept a cannister without being opened out, and in paving that is real work. What you get for it is a sealed sleeve that keeps soil and water off the body and makes the fitting removable later without digging.

What is the linear lens for?

It stretches the circular beam into an ellipse, which is what you want on a wall, a hedge or any long low subject. A round beam on a linear surface wastes light at both ends and leaves scallops between fittings; a linear lens spreads it along the surface instead. It is the accessory most worth knowing about on this listing, and it is not offered for the EMIT-25.

Which lens angles are available?

19°, 36° (the standard, supplied with the fitting) and 60°, plus the linear lens. Note there is no 24° option here, where the EMIT-25 accessories have one — so the angle steps are coarser on the larger fitting. All of them swap in place without lifting the fitting out of the ground, which is the useful part: you rarely know the right angle until the planting has grown.

Diffuser or honeycomb?

They solve glare in opposite ways. The diffuser softens the source into a glow, which suits a fitting seen directly at close range. The honeycomb blocks the view of the source at an angle without spreading the beam, so the light still lands where you aimed it and you simply do not see the emitter walking past. On a 55mm fitting with a 135lm open fascia the honeycomb is often the better answer — there is enough output that hiding the source costs you nothing you will notice.

How much output do the diffuser and honeycomb cost?

Not quantified in any source, and we would rather say so than estimate. Both reduce output — that is inherent — but by how much is not published for either. If you are working to a lux level, ask us and we will get the figures from Domus before you commit to a quantity.

Do these fit the EMIT-25 or EMIT-85?

No. Each size has its own accessories with its own cannister and lens diameters, and the cutouts differ — Ø19mm, Ø43mm and Ø65mm. Worth knowing if you are using more than one size on a job: the cannister costs 5mm on the cutout for the EMIT-25 and EMIT-55, and 17mm on the EMIT-85. Tell us which fittings you have and we will match the parts.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsEMIT 55mm Accessories — 10167 Diffuser, 10168 Linear Lens, 10169 19° Lens, 10170 36° Lens, 10171 60° Lens, 10172 Cannister, 10173 Honeycomb
TypeAccessories for the EMIT-55 inground light — sold individually
⛔ DatasheetThe EMIT-55 FITTING's sheet is attached — its wattage, lumen table and ratings describe a different product
⭐ CannisterChanges the EMIT-55 cutout from Ø43mm to Ø48mm — ⚠ decide before cutting
⭐ Lenses19° · 36° (standard) · 60° — ⚠ no 24° option, unlike the EMIT-25 set. Swappable in place
⭐ Linear lensStretches the beam into an ellipse — for walls, hedges and long low subjects
⭐ DiffuserSoftens the source into a glow — for close-range fittings
⭐ Honeycomb louvreHides the source at an angle without spreading the beam
⚠ Output cost of diffuser / honeycombNot quantified in any source
FitsDomus EMIT-55 only — ⛔ not the EMIT-25 or EMIT-85
⚠ Cannister cutout penalty by modelEMIT-25 +5mm · EMIT-55 +5mm · ⛔ EMIT-85 +17mm
Product record⛔ Three fields
Warranty⚠ 5 years appears on the attached sheet, but that sheet belongs to the FITTING rather than to these accessories. Ask us

Variant specifications

AccessoryWhat it doesDecide when
⭐ CannisterCutout Ø43mm → Ø48mm⛔ Before the hole is cut
⭐ Linear lensRound beam → ellipse, for walls and hedges✅ Any time
19° / 60° lensNarrower or wider than the standard 36°✅ Any time
Honeycomb louvreHides the source without losing aim✅ Any time — fixes glare after handover
Data Sheet & Manual  
Data Sheet & Manual
x

This browser does not support PDFs. Please download the PDF to view it: Download PDF.

Download Datasheet (PDF)

Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
From $1.76
From $1.76
Vendor
Example product title
From $1.76
From $1.76
Vendor
Example product title
From $1.76
From $1.76
Vendor
Example product title
From $1.76
From $1.76
Vendor
Example product title
From $1.76
From $1.76
Vendor
Example product title
From $1.76
From $1.76
Vendor
Example product title
From $1.76
From $1.76
Vendor
Example product title
From $1.76
From $1.76
Vendor
Example product title
From $1.76
From $1.76
Vendor
Example product title
From $1.76
From $1.76