Domus Emit 25mm Rgbw 36° Led 24V Decklight An/Brass

The Domus EMIT-25 RGBW in Antique Brass — a 25 mm colour-changing inground light with a Ø19 mm cutout, IP67, in nine fascia plates.

⚠ This is one finish of a range, split onto its own listing

• The EMIT-25 RGBW is made in four metalware finishes. Black, Stainless Steel and Brushed Brass share one listing; ⚠ Antique Brass is here on its own.
• ⛔ And this listing has no datasheet, where the main one carries three verified ones.
• ✅ It records its 5-year warranty in a FIELD, where the main listing carries the same term on its datasheet only. ⭐ So the split listing is better on warranty visibility and worse on everything else.
• ⭐ Everything below is the EMIT-25 RGBW specification, taken from the verified sheets on the main listing. The fitting is the same; only the finish differs.

⭐ Antique Brass, and when to choose it

• ⭐ Antique brass is a darkened, aged finish rather than the bright yellow of brushed brass. In a garden bed or among stonework it reads as part of the landscape rather than as hardware.
• ✅ It hides marking better than stainless or brushed brass, which matters on a fitting set into a surface people walk on.
• ⭐ And like all the brass options it patinas rather than corroding, which is why brass is the sensible choice in a coastal garden.
• ⚠ Choose the finish for the setting, not the price. All four are the same fitting; what changes is how visible the metalware is by day.

⛔ It needs a controller and a driver, and neither is included

• RGBW has no control of its own — it needs an RGBW colour controller and a 24 V constant-voltage driver, wired in parallel.
• ⭐ The EMIT-25 datasheets name the controller: CHAM-BT-RF-5C, SKU 20141, stocked here.
• ⭐ That receiver is also what the CHAM-REM-5C handheld remote pairs with — the remote that does nothing on its own. Chain: 24 V driver → CHAM-BT-RF-5C → these fittings.
• ⚠ Ordering the fittings alone gets you lights that will not change colour.

Specifying it

• Cutout Ø19 mm without the cannister, Ø24 mm with it — ⚠ decide before you cut; the cannister is a variant of the separate EMIT 25mm Accessories listing.
• 1 W, CREE LED, IP67, IK10, 50,000 hrs. ⛔ None of these is recorded on this listing.
• Beam 19° / 36° / 60°, 36° standard — ⭐ the others are accessory lenses, swappable in place.
• Nine fascias: Round Open, Square Open, Eyelid, 1/2/3/4 Way, Halo, Ring. ⚠ On the tri-colour EMIT-25 the fascia changes output about 38-fold; no lumen figure is published for the RGBW.
• ✅ Warranty 5 years, recorded.

Where it works

• Garden beds, stonework and natural settings — where antique brass disappears.
• Coastal gardens — brass patinas rather than corroding.
• Colour-changing feature runs, under central control.
• ⛔ Not without a controller and a 24 V driver.
• ⚠ Not with a multiway fascia if you need light — those are markers.

Specifying it

25 mm RGBW inground light in Antique Brass. Cutout Ø19 mm without cannister, Ø24 mm with. 1 W, 24 V DC. CREE LED. RGBW colour changing. Beam 19° / 36° / 60°, 36° standard. IP67, IK10. Nine fascias. ✅ Warranty 5 years. ⛔ This listing has no datasheet — the specification above is from the verified sheets on the main EMIT-25 RGBW listing, which covers the other three finishes. ⛔ Requires an RGBW colour controller (CHAM-BT-RF-5C, 20141) and a 24 V constant-voltage driver, neither included.

Supplied and supported by Lights For You.