Domus Lighting Flood Lights Domus BLAZE-PRO 50/70/100W LED Box Floodlight F&p TRIO
Domus Lighting Flood Lights Domus BLAZE-PRO 50/70/100W LED Box Floodlight F&p TRIO
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 19919

Domus BLAZE-PRO 50/70/100W LED Box Floodlight F&p TRIO

IP66 – high water protection
IP66 – high water protection
Color Temprature Changing Technology
Color Temprature Changing Technology
Colour: White
$124.40
$124.40
Product Description  
Product Description
x

The Domus BLAZE-PRO 50 / 70 / 100 W is a switchable LED box floodlight, IP66, with a tri-colour selector, a driver on board and a 1.5 m flex and plug.

⛔ The datasheet attached to this listing is for a different fitting

This product is the 50 / 70 / 100 W BLAZE-PRO. Its attached datasheet states 20 / 30 / 50 W and gives lumen figures to match.

  • ⛔ Those are the smaller fitting’s numbers, and we are not going to print them here dressed as this product’s.
  • ⛔ So this page carries no lumen figure, and that is deliberate. Publishing 5,060 lm for a 100 W floodlight — when 5,060 lm is the 50 W fitting’s output — would understate it by roughly half.
  • ⭐ The right figures exist in this catalogue. The sibling listing BLAZE-PRO 50/70/100W LED Tri-Colour Power Selectable carries a datasheet that our checking process verified against this exact wattage set. Ask us and we will give you the output table from it.
  • ✅ What we can state confidently is everything below — the construction, ratings and behaviour shared across every BLAZE-PRO and confirmed on the sheets that did verify.
What is true of every BLAZE-PRO, including this one
  • IP66 — dust-tight and rated against powerful water jets.
  • 120° beam angle — a wide flood for area lighting, not for throw.
  • CRI ≥70 — ⚠ adequate for security, yards and parking; not colour-critical.
  • 110 lm/W luminous efficacy.
  • Driver on board — ⭐ no external driver, wires straight to 240 V.
  • 4.5 kV surge protection — worth having on an exposed pole or rural supply.
  • Frosted glass lens to soften glare, with an anti-condensation breathing valve — ⭐ the feature that prevents the classic floodlight failure where moisture fogs the lens and output falls without anything having broken.
  • Built-in sensor adaptor interface, and a 1.5 m flex and plug.
  • ⛔ Not dimmable.
  • Operating range −40 °C to +45 °C.
  • ⚠ Lifespan 20,000 hours — ⛔ below the 50,000 that most of this catalogue quotes. About four and a half years at 12 hours a night.
⭐ Setting the two switches
  • Wattage: 50, 70 or 100 W. ⚠ Our record lists only 100 W; the fitting is switchable across all three, and the title is the right reading.
  • Colour: 3000, 4000 or 5500 K. ⚠ Our record lists only two of the three — the 5500 K is missing from the record, not from the product.
  • ⭐ Set both deliberately at installation. Nothing on the outside of the fitting tells you afterwards which position it is in, and a floodlight quietly running at half its rated wattage is a common and invisible waste.
⛔ Our record calls this an indoor product

It records application: Indoor on an IP66 floodlight. ⭐ That field holds “Indoor” on 340 of 342 Domus products, so it carries no information. Read the IP66.

Where it works
  • Yards, driveways, loading areas and car parks — a 120° flood covering ground from a single point.
  • Warehouse and workshop walls, on the supplied flex and plug.
  • Sports and recreation areas where a mid-output floodlight suits better than a 200 W one.
  • ⚠ Not where dimming is required, ⚠ not where colour rendering matters, ⚠ not for long throw.
Specifying it

LED box floodlight, 50 / 70 / 100 W switchable, tri-colour 3000 / 4000 / 5500 K. IP66. 120° beam. CRI ≥70. 110 lm/W. 240 V AC, driver on board, 1.5 m flex and plug. 4.5 kV surge protection. Frosted glass with an anti-condensation breathing valve. Built-in sensor adaptor interface. Operating range −40 °C to +45 °C. ⛔ Not dimmable. ⚠ Lifespan 20,000 hrs. ⛔ The datasheet attached to this listing states 20/30/50 W and belongs to the smaller fitting, so no lumen figure is published here — ask us and we will give you the verified output table for this wattage set. ⚠ Warranty not recorded.

Supplied and supported by Lights For You.

Questions
Why does this page not give a lumen output?

Because the datasheet attached to this listing is for a different fitting. This product is the 50/70/100W BLAZE-PRO; its sheet states 20/30/50W and the lumen figures that go with those. Printing 5,060lm as this product's 100W output — when 5,060lm is actually the 50W fitting's figure — would understate it by roughly half. The correct table does exist in this catalogue, on a sibling listing whose sheet our checking process verified against this exact wattage set. Ask us and we will send it.

So what can you tell me about it?

Everything about how it is built and how it behaves, because that is shared across the whole BLAZE-PRO range and confirmed on the sheets that did verify: IP66, 120° beam, CRI ≥70, 110lm/W, driver on board so it wires straight to 240V, 4.5kV surge protection, frosted glass with an anti-condensation breathing valve, a built-in sensor adaptor interface, a 1.5m flex and plug, not dimmable, and 20,000 hours rated life. What we will not do is quote output figures from a document describing another model.

How do I set the wattage and the colour?

Two switches on the fitting, set independently before you mount it — one for 50, 70 or 100W and one for 3000, 4000 or 5500K. Set both deliberately. Nothing on the outside tells you afterwards which position it is in, and a floodlight quietly running at half its rated wattage is a common and completely invisible waste.

Can it be dimmed?

No. That is stated across the BLAZE-PRO range and it is not something an external control can add. If the design needs to reduce output overnight or run on a dimming protocol, ask us and we will find a floodlight that supports it.

Does it need a separate driver?

No. It uses a driver on board, so the electronics are inside the fitting and it wires straight to 240V — and it arrives on a 1.5m flex and plug. The 24V DC version of the BLAZE-PRO is the exception in the range: that one does need an external constant-voltage driver.

What is the anti-condensation valve for?

It addresses the way floodlights usually fail without breaking. Temperature swings pull moist air through any seal, the moisture condenses on the inside of the lens, and output falls while everything in the fitting still works. The breathing valve lets pressure equalise without letting water in.

Is 20,000 hours a long life?

It is at the low end for LED — most of this catalogue quotes 50,000 hours. At 12 hours a night it is about four and a half years of dusk-to-dawn running. On a sensor that only triggers occasionally it is effectively a very long time; on a car park lit all night it is a replacement cycle to plan for.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUBLAZE-PRO 50/70/100W — 19919 (White)
TypeLED box floodlight, switchable wattage and colour
Wattage50 / 70 / 100W, switch-selectable (⛔ our record lists only 100W)
Colour temperature3000K / 4000K / 5500K, switch-selectable (⛔ our record omits the 5500K)
Lumen output⛔ Not published here — the attached datasheet is for the 20/30/50W fitting. Ask us for the verified table
Efficacy110lm/W
IP ratingIP66 — dust-tight, powerful water jets
Beam angle120° — wide flood, area lighting rather than throw
CRI≥70 — ⚠ adequate for security and area lighting, not colour-critical
Dimming⛔ Not dimmable
DriverDOB (driver on board) — no external driver required
Surge protection4.5kV
LensFrosted glass, with an anti-condensation breathing valve
SensorBuilt-in sensor adaptor interface
Supply240V AC, 1.5m flex and plug
Operating temperature−40°C to +45°C
Lifespan⚠ 20,000hrs — below the 50,000hrs typical of this catalogue
Application⛔ Our record says Indoor. It is an IP66 floodlight
Warranty⚠ Not recorded — ask us

Variant specifications

FigureStatus on this listingWhat we did
Wattage 50/70/100W✅ The title is rightPublished — our record's single 100W is incomplete
Lumen output⛔ Attached sheet is the 20/30/50W fittingWithheld — ask us for the verified table
IP66, 120°, CRI ≥70, DOB✅ Range-level, confirmed on verified sheetsPublished
Colour 3000/4000/5500K⛔ Record omits the 5500KPublished all three
Data Sheet & Manual  
Data Sheet & Manual
x

This browser does not support PDFs. Please download the PDF to view it: Download PDF.

Download Datasheet (PDF)

Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
$124.40
$124.40
Vendor
Example product title
$124.40
$124.40
Vendor
Example product title
$124.40
$124.40
Vendor
Example product title
$124.40
$124.40
Vendor
Example product title
$124.40
$124.40
Vendor
Example product title
$124.40
$124.40
Vendor
Example product title
$124.40
$124.40
Vendor
Example product title
$124.40
$124.40
Vendor
Example product title
$124.40
$124.40
Vendor
Example product title
$124.40
$124.40