Arvin 80 LED Vanity Light

The Arvin 80 is the largest of the Arvin vanity bars — 820 mm wide and only 25 mm high, with the LED built in. It is the brightest vanity fitting in this range by a wide margin: 2,105 lm from 20 W.

Twice the light of the Foley 80

The comparable 800 mm Foley gives 1,155 lm. The Arvin 80 gives 2,105 lm — nearly double, from the same wattage class. Over a large mirror in a windowless bathroom that difference is the one that matters. If your ensuite has no natural light, this is the fitting to specify.

IP44, and the wiring zone

Rated IP44 for splashing, which is the requirement above a basin. Australian wiring rules set zones around baths and showers — your electrician confirms the position. Above a vanity mirror is the normal one.

Colour temperature is set at installation

3000 K, 4000 K or 5000 K, chosen on a switch before mounting. 4000 K is usually right over a mirror — honest for shaving and make-up without the clinical edge of 5000 K. It is not reachable afterwards, so decide first.

Match it to the mirror

At 820 mm this suits a mirror of roughly 900 mm or wider. The Arvin 60 at 620 mm covers narrower vanities.

Where it works

• Above a wide vanity mirror, especially in a bathroom with no window.
• Ensuites, where 4000 K gives honest light for shaving and make-up.
• Double vanities, centred above the mirror run.
• Laundries and utility rooms wanting a bright splash-rated fitting.

Specifying it

820 mm wide, 25 mm high, in aluminium and polycarbonate. Built-in 20 W LED giving 2,105 lm. Not dimmable. 240 V, IP44, Class I — an earth is required. Antique gold, black or chrome. Warranty is three years.

Supplied and supported by Lights For You. Being non-dimmable and this bright, give it its own switch — 2,105 lm at full output is a lot at 6am.

Download Datasheet (PDF)

Download Datasheet (PDF)