Tivah Double Adj. Wall Pillar Light with Sensor CCT in White Havit Lighting - HV1335T-PIR, HV1336T-PIR

This is the white double-headed adjustable Tivah with a PIR sensor — the same two-head, sensor-controlled format as the stainless version, in powder-coated aluminium finished white. White is the choice for a rendered or light-brick facade where a metal finish would stand out; it also stays visually quieter by day on a pillar than a polished head does. Both heads aim independently, the fitting is rated IP65 for direct rain and IK10 for impact, and it can be surface mounted on a wall or a ceiling. As with the stainless version, the two part numbers are two different light engines.

The choice to make

HV1335T-PIR takes replaceable GU10 lamps and gives 2 × 200–560 lm at 3000K, 2 × 255–595 lm at 4000K and 2 × 270–630 lm at 5500K depending on whether a 3, 5 or 7 W lamp is fitted, on a 90° beam. HV1336T-PIR runs a built-in LED at 2 × 12 W and produces 2 × 1080 lm at 3000K, 2 × 1140 lm at 4000K and 2 × 1200 lm at 5500K on a 120° beam. Choose the GU10 for re-lampability, the LED for brightness and a sealed engine.

Where it works

• Rendered white or light-brick facades where a white head blends into the wall.
• Entry pillars on a light-coloured driveway wall, sensor-controlled for arrivals.
• Alfresco soffits, ceiling-mounted and aimed down a pale wall.
• Side gates and back paths on a suburban block, dark until used.

Specifying it

Both variants are 240 V and wire straight to mains — no driver or transformer. Both are Class 1 and require an earth. On HV1335T-PIR the GU10 lamp is replaceable and the socket accepts a maximum of 35 W per lamp; MR16, G9 and E14 lamps will not fit. On HV1336T-PIR the LED is built in, so there is no globe to buy and none can be fitted. Both use a clear glass diffuser, both are IP65 and IK10, and neither is dimmable — the PIR governs switching. The head is ø60 mm and stands 110 mm. Rated life is under 30,000 hours.

Supplied and supported by Lights For You; white powder-coated aluminium keeps this Tivah discreet on a light-rendered wall, so confirm your facade colour and then choose between the re-lampable HV1335T-PIR and the brighter built-in-LED HV1336T-PIR.