Revo Double Adjustable LED Wall Light CCT

The Revo double adjustable is the two-headed version: one cylinder aiming up, one aiming down, each on its own knuckle. Unlike a fixed up/down fitting, both heads move independently, so the beam going up need not mirror the beam going down. That is the whole point of it.

Two aims, set separately

A fixed up/down fitting throws a symmetrical hourglass on the wall. The Revo double does not have to: you can wash the wall above and throw a tighter pool below, or angle both heads off the wall entirely to light a plant above and a path beneath. The trade is that it takes longer to commission — two decisions per fitting, made on a ladder — so set them before the access goes away.

Where it works

• Entry walls where the upper wash is decorative and the lower beam has to actually light a step.
• Pillars and columns, both heads angled to follow the face rather than the wall behind.
• Between a planted bed and a path, lighting each with its own head.
• Exposed and rain-hit elevations — IP65 covers direct rain and hose wash-down. Near salt water, read Havit’s exclusion below.

Output, and how Havit quotes it

Havit specifies this fitting per head — 2 × 9 W, giving 2 × 810 lm at 3000 K, 2 × 850 lm at 4000 K and 2 × 900 lm at 5500 K. So the fitting draws 18 W in total and delivers roughly 1,620 lm, 1,700 lm or 1,800 lm depending on the setting, split between the head aimed up and the head aimed down. The figures published against this listing are the fitting’s totals, which is what you want when comparing it against a single-head model.

Specifying it

Both LEDs are built in — no globes, no sockets. Tri-colour switching covers 3000 K, 4000 K and 5500 K, set at installation, and both heads share the one setting. It runs on 240 V AC with the driver inside the fitting, is not dimmable, and CRI is above 80. The body is powder-coated aluminium in white, IP65.

Supplied and supported by Lights For You. On a run of these along one wall, aim the first fitting, stand back and look at it from where people actually walk, then match the rest to it — matching to a drawing rather than to the eye is how a row ends up subtly uneven.

Coastal siting — Havit’s condition

Havit’s installation instructions for this fitting state that aluminium and 304 stainless steel fittings must not be installed within 5 km of any salt water environment. That is a condition on where the fitting may go, and it sits beside the IP rating rather than inside it: a fitting can be rated for direct rain and still fall outside this rule, because the issue is salt carried in the air rather than water landing on the surface. If your site is inside that zone, talk to us before you specify it — Lights For You can point you at a fitting whose material Havit does not name here.

Earthing and protection class

This fitting runs on 240 V AC mains and is Protection Class 1 — an earth is required at the fitting. Havit's installation sheet has the installer connect the earth conductor first, then live and neutral.

Download Datasheet (PDF)

Download Datasheet (PDF)