Tivah Double Adj. Wall Pillar Light with Sensor CCT in 316 Stainless Steel Havit Lighting - HV1305T-PIR, HV1306T-PIR

This is the double-headed adjustable Tivah in 316 marine-grade stainless steel with a PIR sensor built in — a wall or pillar light that stays dark until something enters its detection zone, then lights two independently aimed beams. It is the fitting for a driveway pillar or a side wall where you want both security coverage and controlled aiming from one point. 316 stainless and IP65 make it suitable for direct rain and coastal exposure, and IK10 means it survives the knocks a driveway position invites. The choice between the two part numbers is a real one: they are different light engines.

The choice to make

HV1305T-PIR takes replaceable GU10 lamps: 2 × 200–560 lm at 3000K, 2 × 255–595 lm at 4000K and 2 × 270–630 lm at 5500K depending on whether 3, 5 or 7 W lamps are fitted, on a 90° beam. HV1306T-PIR has a built-in LED instead and is much brighter: 2 × 1080 lm at 3000K, 2 × 1140 lm at 4000K and 2 × 1200 lm at 5500K from 2 × 12 W on a wider 120° beam. Pick the GU10 version if you want to re-lamp and tune output over time; pick the built-in LED version if maximum brightness and a sealed engine matter more.

Where it works

• Driveway and gateway pillars, with one head on the drive and one on the path.
• Coastal frontages where 316 stainless is the required specification.
• Side gates and service paths that should be dark until used.
• Garage and carport walls needing automatic, aimable coverage.

Specifying it

Both variants are 240 V and wire straight to mains — no driver or transformer is needed. Both are Class 1 and require an earth. On HV1305T-PIR the GU10 lamp is replaceable and the socket accepts a maximum of 35 W; a MR16, G9 or E14 lamp will not fit a GU10 socket. On HV1306T-PIR the LED is built in, so no globe is needed and none can be fitted. Both use clear glass, are rated IP65 and IK10, and are not dimmable — the sensor handles switching. The head measures ø60 mm and stands 110 mm.

Supplied by Lights For You — the two codes on this Tivah are different light engines rather than finishes, so decide up front whether you want the re-lampable GU10 HV1305T-PIR or the brighter built-in-LED HV1306T-PIR before you order.