Stylez LED Step Light CCT 3w Havit Lighting - HV3288T-12V

Stylez is a slim surface-mounted step light — 80 mm long, 60 mm high and only 14 mm deep — with a glass diffuser rather than plastic. The thin profile is why it gets specified: on a wall where a recess is not possible, 14 mm is shallow enough that it reads as a detail rather than a box. Six finishes are offered, including solid brass and 316 stainless steel, so it can be matched to exterior hardware instead of just painted out.

The decision that matters: this is a 12 V fitting

All six SKUs are 12 V DC. Stylez requires a 12 V DC LED driver and must never be connected directly to 240 V — that destroys the fitting immediately and falls outside the warranty. Each fitting must sit within 25 m of its driver, and the driver must be sized for the combined load of every fitting on the circuit. A 300 mm tail is supplied.

Where it works

• Solid masonry and stone walls where cutting a recess is not practical — 14 mm deep is barely there.
• External stair flights and terraces, with IP65 for direct weather.
• Coastal projects in the 316 stainless finish, or brass exteriors in solid and antique brass.
• Retaining and planter walls beside paths, at ankle height where IK10 matters.

Specifying it

Tri-colour selectable at install — 3000K, 4000K or 5500K — and the product's own ordering table gives the same output for every finish: 240 lm at 3000K, 245 lm at 4000K and 250 lm at 5500K from a 3 W SMD LED at a 120° spread, CRI above 80. Set one temperature across the whole run. The glass diffuser holds its clarity outdoors better than polycarbonate, which yellows over years of UV. Dimmable on a suitable dimmable low-voltage driver. The LED is built in: no globe is needed and none can be fitted. IP65 and IK10. Installation by a licensed electrician.

Backed by a 3-year replacement warranty.

Supplied by Lights For You — ask us which of the six Stylez finishes we can get for your site, and we will confirm driver options with it.