Domus BLAZE-PRO - 100/150/200W LED Tri-Colour Power Selectable Sensor Adaptable Medium Size DIY Floodlight IP66

The Domus BLAZE-PRO is a power-selectable LED floodlight — 100 W, 150 W or 200 W by switch, up to 22,000 lumens, IP66, with 3000 K / 4000 K / 5500 K selectable and a 4.5 kV surge protection.

What each setting actually gives you

✅ The colour setting does not change the output. All three wattages run at 110 lm/W whichever colour you choose, so you can pick the colour on appearance alone and the brightness on the job.

110 lm/W at every setting, which is efficient for a floodlight of this scale.

⚠ 22,000 lumens is a great deal of light. Aim it down, not out, and check what it does at a neighbour's window before you leave it. A 120° beam spreads widely, so a badly aimed floodlight is a nuisance over a long distance.

⚠ CRI ≥70 — and being honest about it

Colour rendering here is 70 or above, which is low. Elsewhere in this catalogue you will find CRI 90 fittings, and the difference is visible: colours under a CRI 70 source look flat and slightly grey.

• ✅ For its actual job that is fine. A floodlight lighting a hardstand, a yard or a driveway is there so you can see, move and be safe.
• ⚠ It is not the fitting for a garden you want to look at, for planting, or for anywhere colour matters. Ask us about the CRI 90 spotlights instead.
• ⚠ If it is going up for security camera coverage, know that recorded colour will be poor. A higher-CRI fitting makes footage genuinely more useful.

✅ The features that separate it from a cheap floodlight

• Anti-condensation breathing valve. The commonest way a floodlight dies is condensation forming behind the lens as it heats and cools each day; the valve lets the housing breathe without letting water in. On an outdoor fitting this is the difference between five years and one.
• 4.5 kV surge protection. Floodlights sit on exposed circuits, often on long runs, and a nearby strike or a switching surge is what kills them. 4.5 kV is real protection, not a marketing line.
• DOB — driver on board. No separate driver box to mount or fail.
• Frosted glass lens, which softens the glare a clear lens would give at 22,000 lm.
• 1.5 m flex and plug, so it is a genuine DIY-capable fitting where a socket is available.
• Sensor adaptor interface — a sensor can be added. ⚠ The sensor is a separate part; ask us.

Where it works

• Driveways, yards, hardstands and loading areas.
• Commercial frontages and warehouse aprons at the higher settings.
• Exposed positions and washdown areas — IP66.
• ⚠ Not for gardens or anywhere colour matters — CRI ≥70.
• ⚠ Aim it down and check it from a neighbour's window.

Specifying it

Power selectable: 100 / 150 / 200 W by switch giving 11,000 / 16,500 / 22,000 lm. 3000 K / 4000 K / 5500 K selectable, CRI ≥70, 120° beam, SMD, 20,000 hrs, not dimmable. DOB (driver on board), 4.5 kV surge protection, anti-condensation breathing valve, frosted glass lens, 1.5 m flex and plug, sensor adaptor interface (sensor separate). 240 V AC, IP66 — dust tight, powerful water jets. Warranty 3 years.

Supplied and supported by Lights For You.

Download Datasheet (PDF)