Fedor Square Aluminium Black Tri Colour

The Fedor Square is a 525 mm surface-mounted bollard with a 120 mm square body in poly powder-coated black aluminium, a sealed 12 W tri-colour built-in LED and a clear Perspex diffuser. Havit calls it a 1 directional fitting: one aperture, a 60° spread, and a squared profile that sits better against paving and rendered walls than a round post does.

The square body is the brighter one

Worth knowing before you choose between the two shapes: on the same 12 W engine, Havit gives this square body 770 lm at 3000K, 780 lm at 4000K and 775 lm at 5500K, against 610 lm to 620 lm for the round. That is a real difference on identical power, and it is the shape that produces it. Height does not: the 925 mm square carries exactly these figures too.

Output does not climb with colour temperature

4000K is the brightest of the three at 780 lm, not the coolest setting, so the list is not a ladder. Colour rendering is CRI >80, with SDCM <5 and UGR <12, and lamp expectancy is >30,000hrs. The fitting is not dimmable. There is no lamp holder and no globe: the engine is sealed into the fitting, so there is no replacement lamp and no maximum globe wattage to work to.

Choose the part number and you choose the supply

HV1630T-BLK-240V-SQ is 240 V AC mains and Protection Class 1 — wired with an earth, earth connected first. HV1630T-BLK-24V-SQ is 24 V DC and Protection Class 3, which Havit records as no earth required, running from a suitable 24 V DC LED driver with the supply at the fitting inside ±5% of the voltage required. Both versions are installed by an electrician to AS/NZS 3000, and several on one circuit are wired in parallel.

Setting the colour temperature

It arrives on 3000K. Loosen the allen screws on the side of the fitting, lift the top away, and move the switch on the underside of the top to the setting you want, then refit the top so the seals sit correctly against water.

IP65, IK08 and where it can stand

Sealing is IP65 and impact resistance IK08 on the IK01–IK10 scale. Havit states that aluminium and 304SS fittings must not be installed within 5 km of any salt water environments. This is an aluminium fitting, so that restriction applies to it directly and it is a warranty condition.

Mounting and the details that carry the warranty

The base plate fixes to concrete or a concrete pad, and the fitting must not be installed under ground level. Silicone every hole including the cable entry and apply silicone around the fitting at ground level; keep all o-rings and seals in place; and if your cable is not circular, fix the cable entry to maintain the IP rating. The screws supplied are mild steel and must be replaced with a higher grade anywhere water can reach them. Havit lists HV162X-CI anchor bolts as the accessory for these bollards. Lights For You sourced every figure on this page for the square 525 mm Fedor from the Fedor Square data sheet, the shared installation instructions and Havit's own page for this model, which states a 3 Years Replacement Warranty.