Fedor Black Round Bollard - 600mm

The Fedor 600 is a 600 mm bollard with a sealed 5 W built-in LED, in poly powder-coated black aluminium. Havit describes it as a 1 directional fitting, so the light leaves through a single aperture to mark an edge or a path rather than glowing all the way round. There is no lamp holder and no globe: the LED is part of the fitting, and the only thing you choose after installation is the colour temperature.

Havit publishes no data sheet and no installation sheet for this model

⚠ This is worth saying plainly, because most of the range has both. For HV1660T Havit's own page links no data sheet and no installation sheet, so everything below comes from that product page and nothing else. ⛔ The mounting, sealing and siting conditions that its larger relatives in this range carry are not stated for this model, and we have not assumed they carry across. Ask before you plan an installation around them.

Choose the part number and you choose the supply

HV1660T-BLK-240V runs on 240 V AC mains and is wired straight into the circuit. HV1660T-BLK-24V runs on 24 V DC and, in Havit's words, must be used with a suitable 24 V DC LED driver — do not connect it directly to 240 V. The body, the output and the finish are the same either way; only the supply differs, and it is a decision to make with the cable run rather than after it.

Output, and the setting that is actually brightest

Havit pairs the figures as 210 lm at 3000K, 215 lm at 4000K and 205 lm at 5500K on a 5 W engine. 4000K is the brightest of the three, so output does not climb as the light gets cooler and the list is not a ladder. This is a marker light rather than a floodlight: at around 210 lm it defines where a path goes, it does not light the garden.

Weather rating, and what is deliberately not stated

The body is IP65, which is the one environmental figure Havit publishes for this model. ⚠ There is no impact rating, no beam angle, no protection class and no lamp-life figure on this page, and that is deliberate: no Havit document states them for HV1660T, and we would rather leave a gap you can ask about than print a number we cannot source. Havit also lists anchor bolts as available for its bollards without giving a part number for this model, so none is named here.

Colour temperature and warranty

The fitting is switchable across 3000K, 4000K and 5500K. Havit does not publish where the switch sits on this model, so plan on making that selection at installation with the fitting in your hands. Lights For You has taken every figure on this page for HV1660T from Havit's own product page for these two part numbers, which states a 3 Years Replacement Warranty, and from the store's own variant records for the part numbers and barcodes. There is no third document to check it against, which is why the gaps above are left open rather than filled.