Firan Wall Light

The Firan is a real travertine wall light with iron, 5 W giving 120 lm at 3000 K, weighing 2 kg.

This one is actual stone

Worth being precise, because Telbix makes a similar-looking fitting that is not: the Firan is genuine travertine — a natural limestone formed in mineral springs, full of small pits and a soft banded grain. The Fiora has a travertine-*look* acrylic finish. They photograph alike; only one is stone, and the 2 kg weight is the giveaway.

Stone means every piece differs

Travertine is quarried, not moulded. Colour, banding and pitting vary from fitting to fitting — which is the appeal, but it does mean a perfectly matched pair is not possible. Order together if they are flanking something.

120 lumens is deliberate accent light

Low, and low on purpose. Stone is dense, so light escapes at the edges rather than through the body — you get a warm glow outlining a solid object, not a lamp. It is a fitting to use in a run down a corridor or in a pair beside a bed, never as a room light.

Why it is dimmer than the Fiora

The Firan draws more power (5 W against 3 W) and puts out less light (120 lm against 278 lm). That is the stone doing it: real travertine blocks far more light than the acrylic look-alike. If you want brightness, choose the Fiora; if you want stone, choose this.

It needs an earth

Class I — hard-wired, earth required, and at 2 kg the fixing should be into something solid. IP20 — indoor only.

Where it works

• Corridors and hallways, in a run.
• Beside a bed, in a pair.
• Stairwells, as low-level accent.
• Rooms with existing stone or timber.

Specifying it

2 kg, canopy projection 35 mm, in travertine and iron. Integrated 5 W LED giving 120 lm at 3000 K, included, CRI >80. Not dimmable. 240 V, Class I — earth required, IP20 — indoor and dry locations only. Warranty is three years.

Supplied and supported by Lights For You.

Download Datasheet (PDF)