Kenra Exterior Bollard Light — lifestyle
Kenra Exterior Bollard Light — lifestyle
Kenra Exterior Bollard Light — lifestyle
Kenra Exterior Bollard Light — Black
Kenra Exterior Bollard Light
Kenra Exterior Bollard Light
Kenra Exterior Bollard Light
Kenra Exterior Bollard Light — lifestyle
Kenra Exterior Bollard Light — lifestyle
Kenra Exterior Bollard Light — lifestyle
Kenra Exterior Bollard Light — Black
Kenra Exterior Bollard Light
Kenra Exterior Bollard Light
Kenra Exterior Bollard Light
Loading... + Add to wishlist - Remove from wishlist
Telbix Lighting
SKU: KENRA EX.P-BK

Kenra Exterior Bollard Light

3 Years Warranty
3 Years Warranty
IP44 – splashproof for bathrooms
IP44 – splashproof for bathrooms
Colour: Black
$78.95
$119.00
$78.95
Product Description  
Product Description
x

The Kenra EX.P is a 750 mm exterior bollard in black sand, with a frosted resin diffuser on a slim polycarbonate body — one E27 globe to 25 W, not supplied — IP44.

⚠ Read the rating against what a bollard is for. This one needs a sheltered position.

The Kenra is IP44 — protection against splashing water, and our own specification table says “Outdoor (Covered Area)”. Both statements are correct, and together they are unusual for a bollard, because a bollard normally stands in the open: in a garden bed, along a path, beside a driveway — taking rain from every angle, sprinklers, and the hose.

IP44 does not cover that. So put the Kenra where it is genuinely protected:

  • Along a covered walkway or under a wide eave line.
  • On a verandah edge or a sheltered terrace.
  • In a courtyard with overhead cover.
  • Well clear of irrigation — sprinklers are the most common way an IP44 fitting fails outdoors.

For an open garden bed, a path edge or a driveway, ask us about the Gorem bollard — it is IP65 and rated for exactly that.

Slim, on a wide base — and that pairing is deliberate

750 mm tall, only 90 mm across, on a 160 mm base.

The body is narrower than the base by a wide margin, which is the copy's “wide base for secure installation” and it is the right way round for a bollard:

  • A slim 90 mm column is visually quiet in a garden — it reads as a line of light rather than a post, which a chunkier bollard cannot.
  • A 160 mm base gives it the footprint to stay upright and a proper fixing area, which is what a slim column needs.

At 1.5 kg the Kenra is notably lighter than the 2.7 kg Gorem bollard, which is worth knowing: in a position where it might be knocked or mowed around, the heavier fitting is the safer choice.

A resin diffuser, not glass — and that is an advantage outdoors

The Kenra's frosted diffuser is resin, not glass. In a garden that is the right material:

  • It will not shatter. A bollard at knee height meets mowers, whipper-snippers, wheelbarrows and children. Glass in that position is a liability; resin takes a knock.
  • It is light, which is part of why the whole fitting is 1.5 kg.
  • Frosted resin diffuses completely, so the globe is invisible and there is no glare — the column glows as a whole surface.

⚠ The one thing to know about resin: it is a plastic, and over many years of direct Australian sun plastics can yellow or chalk where glass does not. In a sheltered position — which is where the IP44 rating puts it anyway — that is much less of an issue.

The globe — simple, because nothing shows

One E27 to 25 W, not supplied. Because the frosted resin hides it entirely, brightness and warmth are the only decisions.

  • Warm 2700 K — a warm column reads as inviting; cool white makes a garden look institutional.
  • Rated for ENCLOSED fittings — the diffuser is sealed, and heat with nowhere to go is what kills LED globes.
  • Buying several? Buy the globes together, same brand — mismatched bollards along a walkway are obvious from the house.

And it dims, with the right globe. The datasheet says “No”, which cannot be right: this is a resin diffuser over an E27 lamp holder, with no driver and no electronics. Fit a dimmable LED and use a wall dimmer — on a run of walkway bollards, dimming lets them mark the route without lighting the whole area.

Class II — double insulated, no earth required, which is unusual on a bollard (the Gorem is Class I) and simplifies the wiring on a run of them. The globe is replaceable, where nearly every other outdoor fitting in this range has a sealed integrated LED that ends the fitting when it fails. In resin and polycarbonate, sand finish.

Where it works
  • Covered walkways, verandah edges and sheltered courtyards.
  • In runs, marking a route — slim and visually quiet.
  • Positions where a glass diffuser would be a liability.
  • ⚠ NOT an open garden bed, path edge or driveway — IP44. Use the Gorem at IP65.
  • ⚠ Keep it clear of sprinklers.
Specifying it

750 mm high by 90 mm wide, base 160 mm, 1.5 kg, in frosted resin and polycarbonate, black sand. One E27 globe to 25 W, NOT supplied, replaceable; dimming is globe dependent. 240 V, Class II — double insulated, no earth required, IP44 — SHELTERED outdoor positions only. Warranty is three years, as a replacement warranty.

Supplied and supported by Lights For You.

Questions
Can it stand in an open garden bed?

No, and this is the thing to get right. It is IP44 — splash protection — and our own specification table says “Outdoor (Covered Area)”. A bollard normally stands in the open, taking rain from every angle, sprinklers and the hose, and IP44 does not cover that. Put it along a covered walkway, on a verandah edge or in a sheltered courtyard, well clear of irrigation. For open positions ask us about the Gorem bollard, which is IP65.

Why is the diffuser resin rather than glass?

Because a bollard at knee height meets mowers, whipper-snippers, wheelbarrows and children. Glass in that position is a liability; resin takes a knock and will not shatter. It is also light, which is part of why the whole fitting is 1.5 kg, and frosted resin diffuses completely so the globe is invisible.

Does resin have any drawback?

It is a plastic, and over many years of direct Australian sun plastics can yellow or chalk where glass does not. In a sheltered position — which is where the IP44 rating puts it anyway — that is much less of an issue.

What globe should I buy?

One E27 to 25 W, warm 2700 K, rated for enclosed fittings. Nothing decorative — the frosted resin hides it entirely, so brightness and warmth are the only decisions. Buying several? Buy them together: mismatched bollards along a walkway are obvious from the house.

Can I dim it?

Yes, with a dimmable globe. The datasheet says “No”, which cannot be right — this is a resin diffuser over an E27 lamp holder, with no driver and no electronics. On a run of walkway bollards, dimming lets them mark the route without lighting the whole area.

How does it compare to the Gorem bollard?

The Kenra is slimmer (90 mm against 150), shorter (750 against 900), lighter (1.5 kg against 2.7) and Class II rather than Class I — but it is IP44 where the Gorem is IP65. The Gorem goes in the open; the Kenra needs shelter. In a position where it might be knocked or mowed around, the heavier Gorem is the safer choice.

Why a wide base on a slim body?

Deliberately. A slim 90 mm column is visually quiet in a garden — it reads as a line of light rather than a post — and the 160 mm base gives it the footprint to stay upright and a proper fixing area.

Product Specifications  
Product Specifications
x

Specifications

BrandTelbix Lighting
Model / SKUKENRA EX.P-BK (Black)
TypeExterior BOLLARD — frosted resin diffuser, replaceable globe
IP Rating⚠ IP44 — SHELTERED positions only. NOT an open garden bed
Input Voltage240V
Globe BaseE27 / ES — REPLACEABLE, and not supplied
Lamp Holders1
Wattage25W maximum
Globe AdviceWarm 2700K, rated for ENCLOSED fittings. The resin hides it entirely
DimmingGLOBE DEPENDENT — the datasheet’s “No” cannot be right
Electrical ProtectionCLASS II — DOUBLE INSULATED, no earth required
Height750mm
Width90mm — visually quiet, a line of light rather than a post
Base Width160mm — the footprint a slim column needs
Weight1.5kg — the Gorem bollard is 2.7kg and better where knocks are likely
MaterialFrosted resin and polycarbonate, sand finish
Warranty3 Years — replacement warranty

Variant specifications

BollardHeightWidthIPPosition
KENRA EX.P750mm90mmIP44Covered walkways, verandah edges
GOREM EX.P900mm150mmIP65Open garden beds, drives, coastal
Data Sheet & Manual  
Data Sheet & Manual
x

This browser does not support PDFs. Please download the PDF to view it: Download PDF.

Download Datasheet (PDF)

Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
$78.95
$119.00
$78.95
Vendor
Example product title
$78.95
$119.00
$78.95
Vendor
Example product title
$78.95
$119.00
$78.95
Vendor
Example product title
$78.95
$119.00
$78.95
Vendor
Example product title
$78.95
$119.00
$78.95
Vendor
Example product title
$78.95
$119.00
$78.95
Vendor
Example product title
$78.95
$119.00
$78.95
Vendor
Example product title
$78.95
$119.00
$78.95
Vendor
Example product title
$78.95
$119.00
$78.95
Vendor
Example product title
$78.95
$119.00
$78.95