Domus LYNX 5W TRIO LED IP54 240V 175mm Long

The Domus LYNX 5 W is a surface-mounted single-emitter wall or step light — 175 mm long, IP54, tri-colour switchable, CRI ≥90. 240 V mains — no driver required. ⛔ Not dimmable.

⛔ Its title says 5 W and its datasheet says 7 W

• ⭐ The lumens settle it: 516 lm at 7 W is ≈74 lm/W, squarely inside the LYNX range's 62–82 band. ⛔ At 5 W it would be 103 lm/W — ⚠ outside anything else in the family.
• ⭐ And it is the second instance: the “3 W” single is actually 5 W, by the same 2 W margin. ⭐ Both single-emitter LYNX sizes understate in the title.
• ✅ We have published 7 W. ⭐ On a mains fitting this is a circuit-load question — ⚠ a run of ten is 70 W, not 50.
• ⭐ Small in absolute terms, but it is the kind of under-count that makes a circuit calculation marginal once other loads are on it.

⛔ Not dimmable — and this completes the pattern across all ten LYNX listings

• ⭐ Five sizes, five pairs, and the rule holds in every one. ⛔ No listing mentions its pair.
• ⭐ So the voltage choice IS the dimming choice, across the whole range.
• ⭐ Take this version for a one-off on an existing mains point, or where there is nowhere dry for a driver. ⭐ Take the low-voltage version for a run you will want to turn down.

✅ Its 240 V record is correct here

✅ This listing records voltage = 240V, and that is right. ⛔ Its 12/24 V twin records the same figure and there it is wrong — a low-voltage fitting labelled as mains, one of 12 Domus fittings carrying that error. ⭐ The same value, correct here and dangerous there — which is why each SKU is checked rather than the range read once.

⭐ Single emitter — the right fitting where nothing sits above

• 464 lm at 3000 K, 495 at 4000 K, 516 at 5000 K. ⭐ Roughly a third more than the 115 mm single, over a 60 mm longer body.
• ⭐ One direction, which is what a step riser, a low kerb, a free-standing edge or a retaining wall top actually needs — ⚠ on those a twin fitting's up-light lights the sky.
• ⭐ At 175 mm it covers a wider step or a broader path edge than the 115 mm.

⭐ CRI ≥90 is the whole result on a downward fitting

CRI ≥90 against the ≥80 of most of this catalogue. ⚠ Measured: 100 of 282 Domus products stating a CRI reach 90 — 35%, ⭐ a substantial minority clustered in strips, step lights and exterior wall lights. ⭐ The walking surface is the ONLY thing this fitting lights — ⭐ sandstone, travertine, warm pavers and timber decking go flat and grey at CRI 80 and hold their colour at 90.

Specifying it

• 120°. 50,000 hrs. IP54. Switchable 3000 K / 4000 K / 5000 K.
• Cast aluminium, chromate pre-treated before powder coating; TPS cable gland, so standard building cable enters directly with no junction box.
• ⛔ Its power field records 5 W, following the title. ⭐ Use 7 W for load calculations.
• ⛔ application = Indoor on a fitting typed Exterior Wall Lights. ⛔ No warranty recorded.

Where it works

• A wider step or kerb on an existing mains point — ⭐ where this version is the obvious choice.
• Free-standing edges and retaining wall tops.
• Short mains runs where a driver is more trouble than it is worth.
• ⚠ Not for a run you will want to dim — ⭐ take the 12/24 V version.
• ⚠ Not against a wall you want washed — a twin-emitter LYNX does that.

Specifying it

Surface-mounted single-emitter LED wall and step light. 175 mm. 240 V mains — no driver. Switchable 3000 K / 4000 K / 5000 K. 464–516 lm. CRI ≥90. 120°. IP54. Cast aluminium, chromate pre-treated and powder coated. TPS cable gland. 50,000 hrs. Black or White. ⛔ ITS TITLE SAYS 5W AND ITS DATASHEET SAYS 7W — use 7W for circuit load. A run of ten is 70W, not 50. ⛔ NOT DIMMABLE — the 12/24V version is, and this completes the pattern across all five LYNX size pairs. ✅ Its 240V record is correct, where the same figure on its twin is wrong. ⛔ Warranty not recorded.

Supplied and supported by Lights For You.

Download Datasheet (PDF)