Bar Lights
Batten Lights
Batten Fix Lights(DIY)
Bedside Table Lamps
Cabinet Lights
Ceiling Lights
Chandeliers
Close to Ceiling Light (CTC)
Copper Lights
Emergency Lighting
Fairy Lights
Floor Lamps
High Bay Lights (UFO)
Lamps
Mirror Lights
Oyster Lights
Pendants Lighting
Plaster Wall Lights
Smart Lights
Spot Lights
Table Lamps
Touch Table Lamps
Up/Down Wall Lights
Vanity Lights
Wall Lights
LED Strips
LED Strips Controller
Batten Lights
Bollard Lighting
Brick Lights
Bunker Lights
Coach Lighting
Deck Lights
Driveway Lights
Fairy Lights
Flood Lights
Garden Lighting
Inground Lights
Pathway Lighting
Pillar Mount
Pond Lights
Posts Lights/Top
Outdoor Ceiling Lights
Outdoor Sensor Lights
Outdoor Wall Lights
Solar Lights
Spike Lights
Step Lights
Up/Down Wall Lights
Clearance Sale
LoginCouldn't load pickup availability
The Domus VIVAHEAT 6-in-1 is a premium bathroom heater with an oscillating outlet — 2,250 W, 500 m³/h extraction, 595 × 280 mm cutout, 7.3 kg, in white.
| Function | ⭐ What it does |
|---|---|
| Heater | PTC element, 2,250 W |
| Exhaust fan | 500 m³/h extraction |
| Circulating fan | ⭐ Stops the heat stratifying |
| ⭐ Dry heat | ⭐ Heat without extraction — ⭐ for drying |
| ⭐ Sway | ⭐ An oscillating outlet |
| Light | 1,500–1,850 lm, CRI ≥80 |
⭐ The element is PTC — positive temperature coefficient. ⭐⭐ ITS RESISTANCE RISES AS IT HEATS, SO IT SELF-LIMITS AND CANNOT RUN AWAY THERMALLY the way a bare wire element can. ⭐ In a ceiling cavity full of insulation, with dust and lint accumulating over years, that is a meaningful safety property rather than a marketing line. ⭐ It also means the unit reaches its working temperature quickly and holds it without cycling hard.
⭐ The cutout is 595 × 280 mm in a 615 × 315 mm fascia — about 20 mm of cover each way. ⭐⭐ A 595 mm CUTOUT IS LONGER THAN THE CLEAR GAP BETWEEN JOISTS AT 450 mm CENTRES, ⭐ so it will almost certainly need a joist trimmed and noggins added — carpentry before electrical. ⚠ At 7.3 kg it must be fixed to framing rather than plasterboard. ⭐ Check the joist direction and spacing before ordering; the cutout is the one dimension that cannot be corrected once cut.
⭐ The rating is IPX2: the X means solids were not rated, and the 2 means protection against dripping water at up to 15° tilt. ⭐ That is the lowest water rating in common bathroom use, and it places the unit in a ceiling position outside the shower zone. ⭐ Normal for a heater — it needs airflow through it, and a sealed heater is a contradiction — but it means the rating decides the position rather than where the heat would be most welcome. ⭐ Confirm the zone with your electrician against the current wiring rules.
⭐ 1,500 lm at 3000 K, 1,850 at 4000, 1,750 at 5000, CRI ≥80. ⭐ THAT IS ENOUGH TO BE A BATHROOM'S MAIN LIGHT in most rooms — ⭐ unlike the round THERMAFLOW's 950 lm. ⚠ CRI ≥80 is adequate for general bathroom use and not for close colour work, so a higher-CRI vanity light is worth having if anyone does makeup in the room. ⭐ An 8-switch digital wall controller, 3 m flexible duct and exterior grille are included.
| Specification | Value |
|---|---|
| ⛔ power_watt field | ⛔ 25 W — ⭐ the LAMP; the appliance is 2,250 W |
| ⭐ Scope | ⭐ 8 of 9 bathroom heaters do this |
| ⭐ Real load | ⭐ 9.4 A = 94% of a 10 A circuit |
| ⛔ Dedicated circuit | ⛔ Required — ⭐ nothing says so |
| ⭐ The two premium functions | ⭐ Dry heat · ⭐ oscillating sway |
| ⭐ Dry heat means | ⭐ Heat WITHOUT extraction — ⭐ for drying and pre-warming |
| ⭐ Element | ⭐ PTC — ⭐ self-limiting, ⭐ safer in an insulated cavity |
| Extraction / duct | 500 m³/h · 150 mm duct |
| ⚠ Cutout / weight | ⚠ 595 × 280 mm · 7.3 kg — ⭐ fix to framing |
| Light / IP | ⭐ 1,500–1,850 lm · IPX2 — ⭐ outside the shower zone |
Premium 6-in-1 bathroom heater — heater, exhaust fan, circulating fan, dry heat, sway and light. 2,250 W at 240 V, 60 W AC motor. PTC element. 500 m³/h extraction, 150 mm duct. Light 1,500/1,850/1,750 lm, CRI ≥80. Cutout 595 × 280 mm, fascia 615 × 315 mm. 7.3 kg. IPX2. 8-switch controller, 3 m duct and grille included. ⛔ ITS POWER FIELD PUBLISHES 25 W ON A 2,250 W APPLIANCE — the ninth heater we have checked and the eighth to do it, with only one in the range publishing the correct figure. THE REAL LOAD IS 9.4 AMPS, 94% OF A STANDARD 10 A LIGHTING CIRCUIT ON ITS OWN, and nothing says it needs a dedicated one. ⭐ DRY HEAT IS THE FUNCTION MOST PEOPLE WILL USE WITHOUT REALISING IT MATTERS: running the heater with extraction off puts warm air into the room instead of pulling it out, which is what you want for drying towels — a conventional unit that always extracts while it heats is fighting itself.
Supplied and supported by Lights For You.
No — 2,250. The 25W on its record is the LED light's wattage, an understatement of ninety times. This is the ninth bathroom heater we have checked and the eighth to do it; only one in the range publishes the correct figure.
No. 2,250W at 240V is 9.4 amps and a standard 10A lighting circuit carries 2,400W, so this appliance is 94% of that circuit on its own. It needs a dedicated circuit and nothing on the listing says so. Tell your electrician before the walls close — adding a circuit at rough-in is routine, adding one afterwards means chasing walls.
Running the heater with the extraction off, so warm air goes into the room instead of being pulled out. That is what you want for drying towels, or for warming the room before a shower rather than during one. A conventional unit that always extracts while it heats is fighting itself, and this is the function most people will use without realising it matters.
The outlet oscillates, spreading the warm air rather than aiming it at one spot. The room warms more evenly and nobody stands in a hot column while the rest of the space stays cold. Both dry heat and sway are premium-line features; the standard-line TROPIX and THERMAFLOW models offer four functions without them.
Positive temperature coefficient — its resistance rises as it heats, so it self-limits and cannot run away thermally the way a bare wire element can. In a ceiling cavity full of insulation, with dust and lint accumulating over years, that is a meaningful safety property rather than a marketing line. It also reaches working temperature quickly and holds it without cycling hard.
The spec table says 2,250 and the prose says 2,150. Six of the seven heaters that state both figures show that pattern, and only one — the THERMAFLOW, whose spec is 2,150 — agrees with itself. So the prose reads as boilerplate carried from that model. Immaterial in practice: both are about 9 amps and both need their own circuit.
The ceiling framing. The cutout is 595 x 280mm in a 615 x 315mm fascia, so about 20mm of cover each way — and a 595mm cutout is longer than the clear gap between joists at 450mm centres, so it will almost certainly need a joist trimmed and noggins added. At 7.3kg it must be fixed to framing rather than plasterboard. The cutout is the one dimension that cannot be corrected once cut.
| Brand | Domus Lighting |
|---|---|
| Model / SKU | VIVAHEAT 6-in-1 Premium Slimline — 56080 (White) |
| ⛔ power_watt publishes 25 W | ⭐ On a 2,250 W appliance — ⭐ 90× understated |
| ⭐ The ninth heater checked | ⭐ And the EIGHTH to do it |
| ⭐⭐ REAL LOAD 9.4 A | ⭐ 94% of a 10 A lighting circuit |
| ⛔ Needs a dedicated circuit | ⛔ And nothing on the listing says so |
| ⭐⭐ DRY HEAT — the underrated function | ⭐ Heat WITHOUT extraction |
| ⭐ Which is what you want for drying towels | ⚠ A unit that always extracts while heating fights itself |
| ⭐ SWAY — an oscillating outlet | ⭐ The room warms evenly — ⚠ no hot column |
| ⭐ Both are PREMIUM-line | ⭐ The standard TROPIX and THERMAFLOW offer four functions |
| ⭐ PTC element — ⭐ self-limiting | ⭐ Cannot run away thermally in an insulated cavity |
| ⚠ Sheet says 2,250 W in the table, 2,150 in the prose | ⭐ 6 of 7 heaters show this — ⭐ the prose is boilerplate |
| ⚠ Cutout 595 mm · 7.3 kg | ⚠ Longer than a 450 mm joist gap — ⭐ fix to framing |
| Function | Standard line | ⭐ VIVAHEAT |
|---|---|---|
| Heat · fan · light | ⭐ Yes | ⭐ Yes |
| Circulating fan | ⭐ Yes | ⭐ Yes |
| ⭐ Dry heat | ⛔ No | ⭐ Yes |
| ⭐ Sway | ⛔ No | ⭐ Yes |
For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.
Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.
Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.
If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.
You must lodge a return request via the below request form.
Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.
We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.
Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.
Please refer to the following link to learn more about our policies
Learn MoreThanks for subscribing!
This email has been registered!
| Product | SKU | Product type | Other details |
|---|