Domus Surface Mount KIT To Suit EXIT-REC

The Domus Surface Mount Kit is a conversion kit that lets a recessed EXIT-REC sign be surface-mounted — available in White or Black.

⭐ What it does, and why it exists

• ⭐ An EXIT-REC sign is designed to recess into a ceiling. ⭐ This kit provides the body that lets the same sign mount on the surface instead.
• ⭐⭐ THE CASE FOR IT IS THE CEILING, NOT THE SIGN. ⭐ Concrete soffits, fire-rated ceilings and ceilings with services immediately above are all positions where a recessed fitting is impossible or expensive. ⭐ Rather than specifying a different sign, the kit converts the one you already have.
• ⭐ THAT MATTERS ON A BUILDING WITH MIXED CEILING TYPES. ⭐ A single sign model can be recessed in the plasterboard areas and surface-mounted in the plant rooms and car park, so the building has one sign type, one spare, and one appearance throughout. ⭐ Specifying two different sign models to solve the same problem is the common alternative and a worse one.
• ⭐ ON A FIRE-RATED CEILING IT IS MORE THAN CONVENIENCE — ⭐ cutting a penetration breaches the rating unless it is made good to the same standard.

⛔ It publishes a voltage and a bulb type. It is a housing.

• ⭐ The record carries voltage = 24 V, bulb_type = Built-in LED and ac_dc = DC. ⭐ A surface-mount conversion kit has none of those.
• ⭐ THIS IS THE THIRD EXIT-SIGN ACCESSORY IN THIS PROGRAMME WITH THE SAME PATTERN — ⭐ a reducer plate and a rod mount kit carry it too. ⭐ Measured across the catalogue's unambiguously passive parts, 15 of 15 publish at least one electrical field.
• ⭐ IT IS A TEMPLATE DEFAULT APPLIED REGARDLESS OF WHAT THE PRODUCT IS. ⚠ Harmless on a page a person reads; ⛔ misleading in a filter, where someone looking for 24 V components would be shown housings and brackets. ⭐ We have not repeated those fields here.

⛔ And the dimensions that would decide the purchase are not published

⭐ No datasheet is attached, and no dimensions are given. ⭐⭐ FOR A SURFACE-MOUNT KIT THE PROJECTION IS THE SPECIFICATION — ⭐ how far the sign will stand proud of the ceiling once converted. ⭐ That determines whether it clears a door swing, whether it is in a path of travel, and how it looks in a finished space. ⛔ None of it appears on the listing. ⭐ Tell us the position and we will get the projection confirmed before you order.

⭐ Exit signs are read from a distance, and mounting changes that

• ⭐ A recessed sign sits flush and is read from below and from a shallow angle. ⭐ A surface-mounted sign stands proud and is read from further along the space, because its face is visible edge-on.
• ⭐⭐ IN A LONG CORRIDOR THAT IS AN ADVANTAGE. ⭐ Surface mounting can genuinely improve legibility at distance, which is the whole purpose of the sign.
• ⚠ In a low ceiling it becomes an obstruction. ⭐ Check the head clearance and any path of travel — a sign that protrudes into a doorway is a hazard rather than a safeguard.
• ⭐ The compliance question is viewing distance and legibility rather than mounting method, ⭐ so confirm the arrangement against the project's certification requirements.

⭐ White or black

⭐ Match the sign, not the ceiling. ⭐ A surface-mounted body is visible from below in a way a recessed one is not, and a mismatch draws the eye to the housing rather than to the sign. ⭐ In an exposed-services ceiling black usually disappears better; against plastered white, white does.

✅ What is published

Where it works

• ⭐ Concrete soffits and plant rooms.
• ⭐ Fire-rated ceilings — ⭐ no penetration to make good.
• ⭐⭐ Buildings with mixed ceiling types — ⭐ one sign model throughout.
• ⭐ Long corridors — ⭐ better legibility at distance.
• ⚠ Not on a low ceiling without checking clearance.

Specifying it

Surface-mount conversion kit to suit EXIT-REC recessed exit signs. White or black. Passive — no wiring, no supply, no compliance role of its own. ⭐⭐ THE CASE FOR IT IS THE CEILING, NOT THE SIGN. On a building with mixed ceiling types it lets a single sign model be recessed in the plasterboard areas and surface-mounted in the plant rooms and car park — one sign type, one spare, one appearance throughout. Specifying two different sign models to solve the same problem is the common alternative and a worse one. ⛔ ITS PROJECTION IS NOT PUBLISHED, and for a surface-mount kit that IS the specification: it decides whether the sign clears a door swing and whether it sits in a path of travel.

Supplied and supported by Lights For You.