Bar Lights
Batten Lights
Batten Fix Lights(DIY)
Bedside Table Lamps
Cabinet Lights
Ceiling Lights
Chandeliers
Close to Ceiling Light (CTC)
Copper Lights
Emergency Lighting
Fairy Lights
Floor Lamps
High Bay Lights (UFO)
Lamps
Mirror Lights
Oyster Lights
Pendants Lighting
Plaster Wall Lights
Smart Lights
Spot Lights
Table Lamps
Touch Table Lamps
Up/Down Wall Lights
Vanity Lights
Wall Lights
LED Strips
LED Strips Controller
Batten Lights
Bollard Lighting
Brick Lights
Bunker Lights
Coach Lighting
Deck Lights
Driveway Lights
Fairy Lights
Flood Lights
Garden Lighting
Inground Lights
Pathway Lighting
Pillar Mount
Pond Lights
Posts Lights/Top
Outdoor Ceiling Lights
Outdoor Sensor Lights
Outdoor Wall Lights
Solar Lights
Spike Lights
Step Lights
Up/Down Wall Lights
Clearance Sale
LoginCouldn't load pickup availability
A suggestion, not a specification. A calculator can get it wrong — have a licensed electrician confirm the driver, the total load and the wiring before you order.
The Domus PLEX-COB-20-50M is a 24 V COB LED strip — 20 W per metre, 640 LEDs per metre, 180° beam, IP54, dimmable, 50 m roll.
| Question | ⭐ Why it decides the order |
|---|---|
| ⭐ 1. Does it all need 20 W? | ⭐ At 10 W the same 50 m is 500 W — ⭐ half everything, ⭐ and identical to look at |
| ⭐ 2. Where do ten drivers live? | ⭐ Ventilated, accessible, dry — ⚠ ideally grouped |
| ⭐ 3. Is it dimmed? | ⭐ A kilowatt at full output is rarely what a finished space wants |
⭐ Fifty metres is a single production run, ⭐ so all ten lengths come from the same batch and the white stays consistent between them. ⭐ Across a building where runs meet at corners or face each other across a room, that consistency is visible and batch variation would be too. ⭐ Beyond fifty metres, ask us for consecutive rolls from one batch — free to request and impossible afterwards.
| Specification | Value |
|---|---|
| Load | 20 W per metre — ⭐ 1000 W total |
| ⭐ Mains draw | ⭐ ≈4.3 A at 240 V with driver losses |
| ⭐ Runs / drivers | ⭐ 10 / 10 at ≈120 W — ⛔ not stated |
| ⭐ Heat to dissipate | ⭐ ≈180 W continuous across the ten |
| ⭐ LED density | ⭐ 640 per metre — ⭐ identical across all wattages |
| Colour temperature | 3000 / 4000 / 5000 K |
| Beam / dimmable / IP | 180° · ⭐ dimmable · IP54 |
| ⭐ Driver | ⭐ REQUIRED — stated in the title |
| Warranty | ⭐ 3 years |
| ⭐ Batch | ⭐ One roll is one batch |
No lead time is published. Call our team to confirm. ⭐ We will.
COB LED strip, 50 m roll. 20 W per metre at 24 V DC, 1000 W total. 640 LEDs per metre, dotless. 3000 / 4000 / 5000 K. 180° beam. IP54. Dimmable. Ten drivers at approximately 120 W. 3-year warranty. ⭐⭐ ONE KILOWATT OF STRIP LIGHTING — the largest single load anything in the PLEX-COB range represents, comparable to fifty to seventy downlights, and it arrives on a schedule as "strip lighting". ⭐ AT THIS SCALE A STRIP ORDER NEEDS A CIRCUIT DESIGN: ten drivers, ten feed points, roughly 180 W of continuous heat and about 4.3 A at the mains. ⭐ AND THE FIRST QUESTION CHANGES THE PROJECT — does it all need 20 W? At 10 W the same fifty metres is 500 W and looks identical.
Supplied and supported by Lights For You.
1000 watts — fifty metres at 20W per metre, and the largest single load anything in the PLEX-COB range represents. For scale that is comparable to fifty to seventy downlights, or a small commercial kitchen appliance. And it arrives on a schedule as "strip lighting", which reads as a decorative line item.
At 240V mains it draws roughly 4.3A once driver losses are included, so it is not a spare-socket proposition — it wants its own circuit or a share of a dedicated one. At this scale a strip order needs a circuit design rather than a socket.
Ten drivers at 120W, ten feed points, and roughly 180W of continuous heat to dissipate. None of that appears on the listing, because the wattage is quoted per metre and nothing multiplies it out.
Three questions. Does it all need 20W? Where do ten drivers live — ventilated, accessible, dry and ideally grouped? And is it dimmed, because a kilowatt at full output is rarely what a finished space wants.
The first, because it changes the project. All four PLEX-COB wattages carry the same 640 LEDs per metre and look identical, so 20W where a surface is genuinely worked at and 10 or 5W everywhere else costs nothing visually and halves the load, the driver count, the heat and the cable. Buying fifty metres at one wattage is the simplest order and, on a job this size, almost always the wrong design.
Yes. Fifty metres is a single production run, so all ten lengths come from the same batch and the white stays consistent between them. Across a building where runs meet at corners or face each other across a room, that consistency is visible — and batch variation would be too.
Ask us for consecutive rolls from one batch. It is free to request and impossible afterwards — once the rolls ship, matching them is luck. On a whole-building job it is the single most valuable thing to ask for.
| Brand | Domus Lighting |
|---|---|
| Model / SKUs | PLEX-COB-20-50M — 24037 3000K, 24038 4000K, 24039 5000K |
| ⭐⭐ 1000 W — ONE KILOWATT OF STRIP LIGHTING | ⭐ The largest single load in the PLEX-COB range |
| ⭐ For scale | Comparable to 50–70 downlights — ⚠ and it reads as a decorative line item |
| ⭐ Mains draw | ≈4.3 A at 240 V with driver losses — ⚠ not a spare-socket proposition |
| ⭐⭐ AT THIS SCALE IT NEEDS A CIRCUIT DESIGN | ⭐ Ten drivers · ten feeds · ⭐ ≈180 W of continuous heat |
| ⛔ None of that is on the listing | ⭐ Wattage is quoted per metre and nothing multiplies it out |
| ⭐ QUESTION 1 — does it all need 20 W? | ⭐ At 10 W the same 50 m is 500 W |
| ⭐ And all wattages look IDENTICAL | ⭐ 640 LEDs/m — ⭐ so mixing costs nothing visually |
| ⭐ QUESTION 2 — where do ten drivers live? | Ventilated · accessible · dry · ⭐ ideally grouped |
| ⭐ QUESTION 3 — is it dimmed? | ⚠ A kilowatt at full output is rarely what a finished space wants |
| ⭐ One roll is one batch | ⭐ Keeping ten runs consistent where they meet |
| ⭐ Beyond 50 m | ⭐ Ask for consecutive rolls — ⚠ impossible afterwards |
| 50 m at | Total load | Drivers | ⭐ Heat |
|---|---|---|---|
| ⭐ 20 W/m | ⭐ 1000 W | 10 | ⭐ ≈180 W |
| ⭐ 10 W/m | ⭐ 500 W | ⭐ Fewer | ⭐ ≈90 W |
| Appearance | ✅ Identical | — | — |
For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.
Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.
Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.
If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.
You must lodge a return request via the below request form.
Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.
We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.
Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.
Please refer to the following link to learn more about our policies
Learn MoreThanks for subscribing!
This email has been registered!
| Product | SKU | Product type | Other details |
|---|