Domus PLEO-VIVID Neon Micro 9.6W 24V CRI90 1m

The Domus PLEO-VIVID Micro is a 24 V fixed-colour LED neon flex — 9.6 W per metre, 140 SMD LEDs per metre, 110° beam, IP67, 1 m, in red, blue, green or yellow.

⭐ 110° here, 165° on the standard — and that is the real difference

• ⭐ Both versions draw the same 9.6 W per metre and carry the same 140 SMD LEDs per metre. ⭐ What differs is the SECTION and the BEAM.
• ⭐ The standard publishes 165° — ⭐ close to a full hemisphere, so the lit line is visible from almost anywhere in front of it.
• ⭐ This Micro publishes 110° — ⭐ noticeably tighter, so more of the output goes forward and less spills sideways.

• ⭐ THE USEFUL RULE: if the flex sits INSIDE anything — a reveal, a channel, a routed groove — take the narrower beam. ⭐ A 165° source in a recess throws most of its light at the recess walls, and you lose it. ⭐ A 110° source escapes cleanly.
• ⭐ If the flex is exposed and meant to be SEEN as a line from many directions, take the wider.
• ⚠ Neither listing frames the choice this way — ⭐ the two beam figures are published separately and never compared.

⭐ Micro is the only VIVID version with all four colours in both formats

⭐ We checked the whole range. ⭐ Micro offers red, blue, green and yellow in 1 m AND on a 20 m roll. ⛔ The standard 20 m roll has no yellow; the Side 1 m offers only red and green. ⭐ So if the colour matters more than the section, Micro is the version most likely to have it in the format you need.

⭐ Cut in 50 mm — and why

⭐ 140 LEDs per metre is one every 7.14 mm. ⭐ 50 mm ÷ 7.14 = 7 — ⭐ so a cut segment is a block of seven LEDs in series, and 50 mm is where the block ends. ⭐ Your run rounds to the nearest 50 mm, ⚠ which on formed lettering is a real constraint.

✅ What is published

⛔ Made to order, cut to length

No lead time is published. Call our team to confirm. ⭐ We will.

Where it works

• ⭐ Inside a reveal, channel or routed groove — ⭐ 110° escapes cleanly.
• ⭐ Where the colour matters most — ⭐ all four, in both formats.
• Fine detail and tight sections.
• ⚠ Not as an outline seen from all sides — ⭐ take the 165° standard.
• ⛔ Not set out to a non-multiple of 50 mm.

Specifying it

Fixed-colour 24 V DC LED neon flex, Micro, 1 m. 9.6 W per metre. 140 SMD LEDs per metre, cut in 50 mm increments. 110° beam. IP67. Dimmable with a suitable driver. Red, blue, green or yellow. 3-year warranty. Order code PLEO-VIVID-M-S. ⭐ 110° HERE AGAINST THE STANDARD'S 165°, AND THAT IS THE REAL DIFFERENCE — both draw the same 9.6 W/m with the same 140 LEDs per metre, so what changes is the section and the beam. ⭐ THE USEFUL RULE: if the flex sits INSIDE anything — a reveal, a channel, a routed groove — take the narrower beam, because a 165° source in a recess throws most of its light at the recess walls. ⭐ Micro is also the only VIVID version with all four colours in both formats.

Supplied and supported by Lights For You.

Download Datasheet (PDF)