Domus Lighting Domus PARK-120 W/G 15/30W 1200mm W/Body LED Batten TRIO
Domus PARK-120 W/G 15/30W 1200mm W/Body LED Batten TRIO
Domus PARK-120 W/G 15/30W 1200mm W/Body LED Batten TRIO
Domus Lighting Domus PARK-120 W/G 15/30W 1200mm W/Body LED Batten TRIO
Domus PARK-120 W/G 15/30W 1200mm W/Body LED Batten TRIO
Domus PARK-120 W/G 15/30W 1200mm W/Body LED Batten TRIO
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 66063

Domus PARK-120 W/G 15/30W 1200mm W/Body LED Batten TRIO

Color Temprature Changing Technology
Color Temprature Changing Technology
$80.00
$80.00
Product Description  
Product Description
x

The Domus PARK-120 is a 1200 mm wide-body LED batten — switchable 15 W or 30 W, tri-colour, with a wire guard, in non-dim, on/off sensor or dimming sensor.

⛔⛔ It is not a 120 W fitting. It is 15 W or 30 W.
  • ⭐ Its power field says 120 W. ⭐ Its own description says “Variable Power Wattage Switch Selectable Between 15 W & 30 W”.
  • ⭐ 120 is the LENGTH. ⭐ PARK-120 is the 1200 mm model — ⭐ the range also comes in 600 mm. ⭐ A model-name number has landed in a measurement field.
  • ⚠ The gap is large: eight-fold against the low setting, four-fold against the high one. ⭐ On a carpark or a warehouse with dozens of battens, circuiting for 120 W each would size the installation for roughly four times the load it needs.
  • ⭐ Size at 30 W per fitting — ⭐ the high setting, which is the worst case.
⭐ The dual-wattage switch — the feature worth buying it for
  • ⭐ Domus puts a switch on the LED driver that halves the output. ⭐ In its own words: “if the area is too bright, simply press the switch located on the LED Driver to reduce the light output by half.”
  • ⭐ That solves a real and common problem. ⭐ A garage, storeroom or carpark is usually lit from a standard layout, and the actual brightness depends on the ceiling height, the wall colour and how much is stored in it — ⚠ none of which is known accurately at design stage.
  • ⭐ Ordinarily an over-lit space means either living with it or changing the fittings. ⭐ Here it means pressing a switch on each driver at handover.
  • ⚠ It is a physical switch inside the fitting, not a control input — ⭐ so it is set once, per fitting, by someone on a ladder. ⭐ Decide before the electrician leaves.
⛔ It does not take a T8 tube — it replaces one

⭐ Its lamp field says T8. ⭐ Its description says it is “a direct replacement to traditional T8 and T5 Wide Body Fluorescent battens”. ⚠ Those are opposite meanings. ⭐ This is an integrated LED batten with no lamp at all — when it fails, the fitting is replaced. ⭐ The field records what it SUPERSEDES, not what it uses, ⚠ which would send someone looking for a tube that does not exist for it.

⭐ Decoding the title
In the name ⭐ Means
PARK-120 ⭐ 1200 mm long — ⚠ not 120 W
W/G ⭐ Wire Guard — a protective cage over the fitting
W/Body ⭐ Wide Body — the wider fluorescent batten format
15/30W ⭐ The two switchable settings
TRIO ⭐ Tri-colour switchable, 3000 / 4000 / 5000 K

⭐ The wire guard is the part to notice. ⭐ In a garage, storeroom or carpark a batten gets hit — by a ladder, a roof rack, a stored object — ⭐ and the diffuser is what breaks. ⭐ A guard is the difference between a scuff and a replacement. ⚠ The alternative in this range is a prismatic polycarbonate diffuser, which looks better and protects less.

⭐ Three variants, and the sensor accessory nobody expects
  • Non-dim — ⭐ the plain fitting.
  • On/off sensor — ⭐ microwave, switches on presence.
  • Dimming sensor — ⭐ holds a low level and lifts on presence, which suits a carpark far better than on/off.

⛔ Both sensor models need SENSOR-INT-01, sold separately, to change any default setting or to programme them. ⚠ So a sensor fitting arrives on its factory defaults and cannot be adjusted without an accessory nobody mentions until commissioning. ⭐ Order it with the first batch.

✅ What is published
Specification Value
Length ⭐ 1200 mm — ⭐ also available at 600 mm
Power ⭐ 15 W or 30 W switchable — ⛔ field says 120 W
Colour temperature 3000 / 4000 / 5000 K — ⭐ DIP switch inside the fitting
Body Pressed sheet metal, white powder coated
Cover ⭐ Wire guard — ⚠ prismatic polycarbonate is the alternative
Voltage 240 V
Lamp ⭐ Integrated LED — ⛔ field says T8; ⭐ it REPLACES T8
Sensor Microwave — ⛔ SENSOR-INT-01 required to programme, sold separately
⛔ Lumen output · IP rating · warranty ⛔ None published
Where it works
  • Garages, laundries and storerooms.
  • ⭐ Underground carparks — ⭐ the dimming sensor suits them.
  • ⭐ Replacing fluorescent battens — ⭐ a direct swap for wide-body T8 and T5.
  • ⚠ Not circuited at 120 W — ⭐ size at 30 W.
  • ⛔ Not outdoors — ⚠ no IP rating is published.
Specifying it

1200 mm wide-body LED batten. 15 W or 30 W switchable at the driver. Tri-colour 3000 / 4000 / 5000 K by DIP switch inside the fitting. 240 V. Pressed steel body, white powder coated, wire guard. Integrated LED. Non-dim, on/off microwave sensor or dimming sensor. ⛔ IT IS NOT A 120W FITTING — 120 IS THE LENGTH. PARK-120 is the 1200mm model, and its own description says 15W or 30W. ⭐ SIZE AT 30W, the worst case; circuiting at 120W would size the installation for roughly four times the load. ⛔ AND IT DOES NOT TAKE A T8 TUBE — it REPLACES one. ⭐ The dual-wattage switch is the feature worth buying it for: an over-lit garage becomes a switch press at handover rather than a change of fittings.

Supplied and supported by Lights For You.

Questions
Is it a 120W fitting?

No — 15W or 30W, switchable. The power field says 120W, but 120 is the length: PARK-120 is the 1200mm model, and the range also comes in 600mm. Its own description says "Variable Power Wattage Switch Selectable Between 15W & 30W". A model-name number has landed in a measurement field.

What do I size the circuit at?

30W per fitting — the high setting, which is the worst case. The gap matters at scale: on a carpark or warehouse with dozens of battens, circuiting for 120W each would size the installation for roughly four times the load it actually needs.

What does the dual-wattage switch do?

It halves the output. Domus puts a switch on the LED driver, and in its own words: if the area is too bright, press it to reduce the light output by half. That solves a common problem — a garage, storeroom or carpark is lit from a standard layout, but the actual brightness depends on ceiling height, wall colour and how much is stored in it, none of which is known accurately at design stage.

Can I change it later?

Yes, but it is a physical switch inside the fitting rather than a control input, so it is set once per fitting by someone on a ladder. Decide before the electrician leaves. The point is that an over-lit space becomes a switch press at handover rather than a change of fittings, which is a genuinely useful thing to have.

Does it take a T8 tube?

No — it replaces one. The lamp field says T8, but the description says it is a direct replacement to traditional T8 and T5 wide-body fluorescent battens. Those are opposite meanings. This is an integrated LED batten with no lamp at all, so when it fails the fitting is replaced. The field records what it supersedes rather than what it uses.

What do W/G and W/Body mean?

W/G is wire guard — a protective cage over the fitting. W/Body is wide body, the wider fluorescent batten format it replaces. The wire guard is the part to notice: in a garage or carpark a batten gets hit by a ladder, a roof rack or a stored object, and the diffuser is what breaks. A guard is the difference between a scuff and a replacement. The alternative in this range is a prismatic polycarbonate diffuser, which looks better and protects less.

What do I need for the sensor versions?

SENSOR-INT-01, sold separately, and it is required to change any default setting or to programme them. So a sensor fitting arrives on its factory defaults and cannot be adjusted without an accessory nobody mentions until commissioning. Order it with the first batch. Of the two sensor types, the dimming sensor suits a carpark far better than on/off, because it holds a low level and lifts on presence rather than plunging the space into darkness.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsPARK-120-WG — 66063 Non-Dim, 66064 On/Off Sensor, 66065 Dim Sensor
⛔ FIELD SAYS 120W⭐ Its own description says 15W or 30W
⭐ 120 IS THE LENGTHPARK-120 = the 1200mm model — ⭐ also available at 600mm
⚠ The gapEight-fold against 15W, four-fold against 30W
⭐ SIZE AT 30WThe worst case — ⚠ circuiting at 120W sizes for ~4× the real load
⭐ THE DUAL-WATTAGE SWITCH⭐ On the DRIVER — ⭐ press it to halve the output
⭐ Why it mattersAn over-lit garage becomes a switch press at handover, ⚠ not a change of fittings
⚠ But it is physicalSet once per fitting, on a ladder — ⭐ decide before the electrician leaves
⛔ FIELD SAYS T8⭐ It REPLACES T8 and T5 wide-body fluorescents — ⭐ integrated LED, no lamp
⭐ W/G = WIRE GUARD⭐ In a garage the diffuser is what breaks — ⚠ prismatic protects less
⭐ W/Body = WIDE BODYThe fluorescent batten format it replaces
⛔ SENSOR-INT-01 sold separately⚠ REQUIRED to programme either sensor model — ⭐ order it with the first batch
⛔ Lumens / IP / warrantyNone published

Variant specifications

VariantBehaviourBest for
Non-dimOn or offGarages, storerooms
On/off sensorOff until presence⚠ Abrupt in a carpark
⭐ Dim sensor⭐ Low level, lifts on presence⭐ Underground carparks
Data Sheet & Manual  
Data Sheet & Manual
x

This browser does not support PDFs. Please download the PDF to view it: Download PDF.

Download Datasheet (PDF)

Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
From $80.00
From $80.00
Vendor
Example product title
From $80.00
From $80.00
Vendor
Example product title
From $80.00
From $80.00
Vendor
Example product title
From $80.00
From $80.00
Vendor
Example product title
From $80.00
From $80.00
Vendor
Example product title
From $80.00
From $80.00
Vendor
Example product title
From $80.00
From $80.00
Vendor
Example product title
From $80.00
From $80.00
Vendor
Example product title
From $80.00
From $80.00
Vendor
Example product title
From $80.00
From $80.00