Domus Lighting LED Drivers Domus Linear Non Dim Cv Type IP20 30W 24V
Domus Linear Non Dim Cv Type IP20 30W 24V
Domus Linear Non Dim Cv Type IP20 30W 24V
Domus Linear Non Dim Cv Type IP20 30W 24V
Domus Lighting LED Drivers Domus Linear Non Dim Cv Type IP20 30W 24V
Domus Linear Non Dim Cv Type IP20 30W 24V
Domus Linear Non Dim Cv Type IP20 30W 24V
Domus Linear Non Dim Cv Type IP20 30W 24V
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 20173

Domus Linear Non Dim Cv Type IP20 30W 24V

IP20 – perfect for indoor use
IP20 – perfect for indoor use
$84.00
$84.00
Product Description  
Product Description
x

The Domus DRIVER-24V-SLIM is a 24 V DC constant-voltage LED driver — 30 W, 60 W, 100 W or 150 W, IP20, indoor, non-dimmable, supplied complete with 1 m flex and plug. 5-year replacement warranty.

⭐ It is the only driver in this family that reaches 150 W
Non-dimmable (this one) 5-in-1 dimmable
Wattages 30 · 60 · 100 · 150 W 30 · 60 · 100 W
Dimming ⛔ None ✅ Five protocols
Weight 200 g 350 g
  • ⭐ So above 100 W this is the only single-driver option, and dimming is off the table. ⚠ If you need both, it is two 100 W dimmable drivers on one control signal.
  • ⭐ The 150 g weight difference at identical dimensions is the dimming electronics — ⭐ which is also why the dimmable unit costs more and has more to go wrong.
  • ⭐ Where you genuinely do not need dimming — a cupboard, a plant room, a cove that is either on or off — this is the simpler and more robust choice.
  • ⚠ But decide deliberately. ⭐ Retro-fitting dimming later means replacing the driver, and on a concealed strip installation that can mean opening up joinery.
⭐ This is what the 12/24 V fittings and strips need — and nothing says so
  • ⭐ The low-voltage LYNX, ZAC-PRO, ZEKE-PRO and AURA fittings all require a “12 V or 24 V DC constant voltage LED driver, wired in parallel”. ⭐ This is that driver, in its non-dimming form.
  • ⛔ No fitting listing names a driver; this listing names no fitting.
  • ⭐ Its datasheet leads with LED strip and profile, which is the other main use.
  • ⭐ Sizing: total the real wattage and leave headroom. ⚠ Be careful with the LYNX power fields, which record one emitter rather than the fitting — a 2 × 5 W LYNX draws 10 W, not 5.
⛔ "Up to 79%" efficiency — plan for the heat
  • ⚠ Where a modern LED driver is usually 85–92%. ⭐ At 79% a 150 W load draws about 190 W — ⚠ 40 watts becoming heat.
  • ⭐ On the 150 W model that is the most heat any driver in this family produces, in the same 260 × 30 × 18.5 mm body as the 30 W version.
  • ⚠ So ventilation matters most on the largest one. ⭐ Do not bury it in insulation or seal it into a cavity — heat is what kills drivers early, and this one has the least surface area per watt.
  • ⚠ “Up to” is the best case; at part load, efficiency is usually lower still.
Specifying it
  • 240 V AC input, 24 V DC output. ✅ Its voltage = 240V record is correct — that is the input, and the output is recorded separately. ⭐ Worth noting because 12 Domus FITTINGS carry the same figure wrongly.
  • ⭐ Voltage tolerance ±0.5 V, regulation ±0.5% — ⭐ tight, and it is what prevents visible brightness drift along a long strip run.
  • PF > 0.96. −40 °C to +60 °C. 20–90% RH. 260 × 30 × 18.5 mm. 200 g.
  • Secondary-side short circuit, thermal overload, over-temperature and over-voltage protection.
  • ⚠ Wire the load in parallel, not series — ⭐ every fitting must see the full 24 V.
  • ✅ IP20, indoor only — ⭐ and the record's application = Indoor is CORRECT here, which is unusual in this catalogue. ⛔ bulb_type = Built-in LED on a driver.
Where it works
  • Driving 12/24 V LYNX, ZAC-PRO, ZEKE-PRO and AURA fittings, wired in parallel.
  • LED strip and profile runs.
  • Loads above 100 W — ⭐ the only single driver here that reaches 150.
  • Anywhere dimming genuinely is not wanted — ⭐ simpler, lighter, less to fail.
  • ⚠ Indoors and ventilated only.
Specifying it

24 V DC constant-voltage LED driver, non-dimmable. 30 W, 60 W, 100 W or 150 W. 240 V AC input. PF > 0.96. Voltage tolerance ±0.5 V, regulation ±0.5%. IP20, indoor only. −40 °C to +60 °C. 260 × 30 × 18.5 mm, 200 g. 1 m flex and plug. Parallel wiring. ✅ 5-year replacement warranty. ⭐ The ONLY driver in this family that reaches 150W — the dimmable version stops at 100W, so above that dimming is off the table. ⛔ Efficiency is "up to 79%": a 150W load draws ≈190W and dumps ≈40W as heat in the same body as the 30W model. Ventilate it. ⚠ Retro-fitting dimming later means replacing the driver.

Supplied and supported by Lights For You.

Questions
Should I take the dimmable version instead?

Decide deliberately, because retro-fitting dimming later means replacing the driver — and on a concealed strip installation that can mean opening up joinery. Where you genuinely do not need dimming (a cupboard, a plant room, a cove that is either on or off) this is the simpler and more robust choice: 150g lighter at identical dimensions, which is the dimming electronics, and correspondingly less to go wrong. Where dimming is even possible later, the 5-in-1 version is worth the difference.

Why is this the only one that reaches 150W?

The dimmable range stops at 100W, so above that this is the only single-driver option in the family — and dimming is off the table with it. If you need both more than 100W and dimming, the usual answer is two 100W dimmable drivers on one control signal; with 0–10V or PWM they track together reliably. Tell us the total load and whether dimming is wanted and we will confirm the arrangement.

How do I size it?

Total the real wattage of the load and leave headroom — running a driver at its rated maximum shortens its life. Be careful with the LYNX power fields in particular, which record one emitter rather than the fitting: a 2 × 5W LYNX draws 10W, not 5. So six of those is 60W, and you would want the 100W model rather than the 60W to leave margin. Tell us the fitting count and we will size it with you.

Why does the efficiency figure matter?

Because 79% is low — a modern LED driver is usually 85 to 92% — and on the 150W model it produces the most heat of anything in this family: a 150W load draws about 190W, so 40 watts becomes heat, in the same 260 × 30 × 18.5mm body as the 30W version. That means the least surface area per watt, so ventilation matters most on the largest one. Do not bury it in insulation or seal it into a cavity; heat is what kills drivers early. "Up to" is also the best case — at part load it is usually lower.

Is this the driver my LYNX fittings need?

Yes, if they are the 12/24V versions and you do not want dimming. Those fittings require a "12V or 24V DC constant voltage LED driver, wired in parallel", and this is that driver in its non-dimming form. Worth saying because no fitting listing names a driver and this listing names no fitting — both halves of the pairing are in the catalogue and neither points at the other.

Is 240V correct on a 24V driver?

Yes — that is the input. A driver takes 240V AC in and puts 24V DC out, and this listing records the output separately. It is worth noting because twelve Domus fittings sold as 12V or 24V record the same 240V figure, and there it is wrong. The same value is correct on a driver and dangerous on a low-voltage fitting, which is why each listing is checked individually.

Why do the regulation figures matter?

On a long strip run they are what stops visible brightness drift along the length. This driver holds ±0.5V tolerance and ±0.5% regulation, which is tight. Loose regulation shows as the far end of a run being perceptibly dimmer than the near end — a fault that cannot be fixed after installation without re-running cable or adding a second feed. On short runs and on discrete fittings it matters much less.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsDRIVER-24V-SLIM — 20173 (30W), 20174 (60W), 20175 (100W), 20176 (150W)
Type24V DC constant-voltage LED driver, non-dimmable
⭐ Wattages30 · 60 · 100 · 150W — ⭐ the ONLY driver in this family that reaches 150W
⛔ DimmingNone — ⚠ retro-fitting it later means replacing the driver
⭐ Against the dimmable version200g against 350g at identical dimensions — ⭐ the difference is the dimming electronics
⭐ What it drivesThe 12/24V LYNX, ZAC-PRO, ZEKE-PRO and AURA fittings, and LED strip — ⛔ no listing on either side says so
⛔ Efficiency"Up to 79%" — ⚠ at 150W that is ≈190W drawn and ≈40W of heat, in the same body as the 30W model
⚠ VentilationMatters most on the 150W — ⭐ least surface area per watt. Do not bury it
✅ Voltage240V AC in, 24V DC out — ⭐ the 240V record is CORRECT here; it is the input
⭐ RegulationVoltage tolerance ±0.5V, regulation ±0.5% — ⭐ what prevents brightness drift on long strip runs
Power factorPF > 0.96
ProtectionSecondary-side short circuit, thermal overload, over-temperature, over-voltage
Operating range−40°C to +60°C · 20–90% RH
Dimensions / weight260 × 30 × 18.5mm · 200g
✅ IP rating / applicationIP20, indoor only — ⭐ and here the "Indoor" record is CORRECT
Warranty✅ 5 Years replacement, per the datasheet

Variant specifications

LoadThis non-dim driverThe 5-in-1 dimmable
Up to 100W✅ Yes✅ Yes — ⭐ take this if dimming is possible later
⭐ 100–150W✅ The only option⛔ Not made
⭐ 100–150W with dimming⛔ No⭐ Two 100W drivers on one signal
Weight200g350g
Data Sheet & Manual  
Data Sheet & Manual
x

This browser does not support PDFs. Please download the PDF to view it: Download PDF.

Download Datasheet (PDF)

Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
From $84.00
From $84.00
Vendor
Example product title
From $84.00
From $84.00
Vendor
Example product title
From $84.00
From $84.00
Vendor
Example product title
From $84.00
From $84.00
Vendor
Example product title
From $84.00
From $84.00
Vendor
Example product title
From $84.00
From $84.00
Vendor
Example product title
From $84.00
From $84.00
Vendor
Example product title
From $84.00
From $84.00
Vendor
Example product title
From $84.00
From $84.00
Vendor
Example product title
From $84.00
From $84.00